All Products

2801-20-003 CC 28 Fixed Gas Transmitter with Gas Optimized Catalytic Sensor 0-4% by Volume (MK 208-1), Ammonia (NH3), Display / Alarm by GfG

Superior technology

In areas where combustible gas or vapor hazards may exist, GfG s new CC 28 combustible transmitter is the perfect choice for reliable area monitoring. With its proven design, this ATEX certified transmitter offers an integrated explosion-proof buzzer and bright-alarm LEDs for reliable warning of combustible gas hazards (even in hazardous locations). This superior design provides warnings for immediate personnel, and ensures entire plant safety.

Easy handling

Smart sensor technology allows easy installation. Sensor replacement takes only a few seconds-simply plug in the sensor. User adjustments are performed at the transmitter with simple touch keys, or with the optional remote control interface (one person calibration).

RC2 remote control

Several combustible gases are lighter than air. With the transmitter mounted close to the ceiling, calibration can be difficult. The remote control for the CC 28 allows you to perform calibration or zero adjustments without the need of a ladder or lift. A flexible cable connects the remote control to the transmitter and displays the same reading as the display on the transmitter. With the remote control inspection,service and calibration can be performed easily by one person.

The sensor and the integrated temperature compensation provide highest measurement accuracy.

Low maintenance requirements and long sensor life reduce your cost of ownership. Just sign a service contract and don t worry about any problems. We will service your system at regular intervals.

Models

Model CC 28D allows you to read the gas concentration both at the transmitter and at the GMA controller.With the RC2 remote control - the CC 28 is easy to use and to operate even if it is mounted at the ceiling.

Model CC 28DA provides additional warning with bright integrated alarm LEDs and a buzzer.

Features

• Full-featured smart transmitter for combustible gas measurement
• Non-intrusive calibration adjustment
• Expected sensor life of 5 years
• Increased safety design to reduce installation cost in potentially hazardous locations
• ATEX EEx dem [1b] IIC T4
• Proprietary, high performance combustible gas sensor
• Available in three configurations: Blind (no display), Display, Display with local alarms

Advantages at a glance

• Display of gas concentration at transmitter or remote control
• ATEX II G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need of expensive EX-proof buzzer or wiring
• Easy sensor replacement with plug-in sensors
• Long life sensor
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments by means of touch keys or remote control without opening the casing
• Easy handling even at hard-to-reach accessible transmitter positions.

Sperian Biosystems PhD6 Multigas Detector

The Biosystems PhD6 Multigas Detector is the latest development in compact multigas detection systems. The detector is proven to be compact, efficient, and cost effective. With dual alarm systems featuring ultra-loud audible indicators and ultra-bright LED visual indicators, users and those nearby are always notified when potential hazards may be present. When developing this detector, the engineers at SperianProtection Instrumentation also developed an express docking station that would reduce calibration time and labor costs. The detection and docking station help users meet record keeping requirements and reduce the risks of human error. With the SperianBiosystems PhD6 Multigas Detector, users can rest assured that they are receiving the very best in gas detection technology.

Key Features

The Biosystems PhD6 Multigas Detector is compatible with over 19 sensor choices including:

• PID
• IR-CO2
• IR-CH4
• Conventional LEL
• Oxygen
• 15 different toxic gas sensors

The gas detector is encased in a durable solid polycarbonate case with a rubber over mold for easy handling. It has an interchangeable battery pack with both Alkaline and Li-Ion rechargeable batteries. Both battery types offer up to 24 hour run times. The unit features dual audible alarms at 92 decibels and front and side ultra-bright LED visual alarms to ensure that the user and those nearby are always notified of possible hazardous conditions. For easy interpretation, the detector has an easy to read status bar and large LCD display that notifies users of the device s functionality and calibration due date. Using the menu options, users can easily adjust a variety of the instrument s settings.

Automatic Docking Station

When developing the PhD6 Multigas Detector, product developers also created an automatic docking station (Biosystems IQ6 Express Dock) to be fully compatible with the detector. The docking station aims to reduce labor time and costs by fully automating certain aspects of instrument maintenance including calibration, functionality testing, and record keeping. Using the Express Dock, users can maintain compliance with recordkeeping requirements by simply docking the detector in the station. The station will automatically perform a variety of operations without user intervention.

Sperian Protection Instrumentation and Honeywell

Sperian Protection Instrumentation is a global leader in personal safety equipment. The company was recently acquired by Honeywell, another global leader in technology and innovation. As a Fortune 100 company, Honeywell has a vested interest in maintaining its reputation as a developer of efficient and reliable safety equipment. Sperian Protection Instrumentation helps to expand Honeywell s personal safety offerings while advancing their position in the American market. By purchasing a product by Sperian and Honeywell, customers can be assured they are receiving the very best in safety technology and equipment.

CH0200-V Chlorine, Free, 0-200 ppm by AquaPhoenix

• Vial can be private labeled with your company logo, 200 strips.

*Please note we can only ship RKI products to customers within the United States

MCXL-XWH0-B-UK GasAlertMicroClip XL Detector, Combustible (% LEL), Oxygen (O2), Hydrogen Sulfide (H2S) - Black Housing, UK Version (United Kingdom) by BW Technologies

The easy to wear, slim and compact GasAlertMicroClip provides affordable protection from atmospheric gas hazards. For standard operation with features you can count on, opt for the GasAlertMicroClip XT. For extended battery life, especially in cold weather, choose the GasAlertMicroClip XL. Both offer visual compliance at a glance with the flashing, green IntelliFlash™. Easy onebutton operation reduces training time and lets workers focus on the job at hand. For simple, cost-effective management of your records, calibration and bump testing, choose BW's MicroDock II automatic test and calibration system and Fleet Manager II software.

• Easy and comfortable to wear; thin and lightweight
• Easy operation and straightforward training with one-button simplicity
• Easy visual compliance with flashing, green IntelliFlash™
• Easy and cost effective to own

Additional GasAlertMicroClip features:

• Choose the GasAlertMicroClip XL for cold weather performance
• IntelliFlash™ verifies operation and compliance to both the user and supervisor
• Tamper-proof, one button operation
• Powered by a rechargeable lithium polymer battery

Standard features of BW multi-gas products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot
• Multi-language support in English, French, German, Spanish and Portuguese
• Conveniently manage your fleet using Fleet Manager II

Part Number: MCXLXWH0BUK

Part Number: 10L-489E

72-PWG-C GX-3R Pro 5 Gas Personal Monitor, Oxy/SO2/NH3, with Li-Ion battery & 100-240 VAC charger by RKI Instruments

The GX-3R Pro is the world's smallest 5-gas monitor weighing only 4.58 ounces and fits in the palm of your hand (2.9" W x 2.6" H x 1.06" D). It simultaneously monitors and displays 5 different gases. In addition to monitoring standard confined space gases, LEL, O₂, CO, & H₂S, the GX-3R Pro has a 5th channel where you can add infrared or toxic sensors. Two of the four sensor slots have interchangeable sensors providing flexible configurations, which can easily be changed in the field.

The GX-3R Pro comes equipped with Bluetooth wireless communication, man-down alarm, the choice of alkaline or rechargeable power supply, and a 3 year warranty. The Lithium-ion battery pack will operate for 25 hours and will fully charge in 3 hours.

The GX-3R Pro utilizes Bluetooth communication to display direct gas readings from the instrument to a phone app, which is available free on either iOS or Android phones. Automatic notifications can be programmed to send text or email messages, if there is an alarm event from the GX-3R Pro.

Safety supervisors will appreciate the non-compliance indicator. The instrument flashes it's 3 LED lights every 30 seconds in the following conditions; if the instrument has not been bump tested, or if calibration is due, or if there was a gas alarm event. The 3 LED lights will continue to flash once every 30 seconds until the non-compliance condition has been resolved. The 30 second interval is adjustable.

Features

• Smallest & lightest 5 gas monitor: 2.9" W x 2.6" H x 1.06" D , 4.58 ounces
• Simultaneous detection of 5 gases: LEL, O₂, H₂S, CO, and other optional sensors; H₂ Compensated CO sensor available
• Simple 2-button operation
• Bluetooth communication with iOS & Android App
• Non-Compliance Indicator
• 3 user adjustable alarm levels
• Panic Alarm - Tap instrument twice
• Man Down Alarm
• Impact resistant body
• Large full dot, auto-backlit display with auto-rotation
• Stealth mode for law enforcement
• Field replaceable sensors & filters
• Water and dust resistant design, IP66/68
• 3 Year warranty

Applications

• Personal monitoring
• Confined spaces
• Refineries/petrochemical
• Utilities
• Oil and Gas
• Water/wastewater
• Fire services
• Construction

*Please note we can only ship RKI products to customers within the United States

6300-4103 MGS-150 Gas Transmitter, R404A: 0 - 1,000 ppm, IP66 Housing w/Remote Sensor by Bacharach

MGS-150 Series Gas Transmitter is a feature-rich gas detection system with a wide range of sensor options to provide real-time monitoring of refrigerant, combustible, and toxic gases. It comes standard with user-selectable analog and digital outputs that can be set for 4-20 mA, 0-5V, 1-5V, 0-10V, or 2-10V; allowing them to connect directly to most BMS, SCADA or control systems. Alarm indicators include an onboard alarm LED and audible buzzer, in addition to an alarm relay for connection to external audible/visual alarms or a BMS system. The product's alarm threshold value is pre-set to factory defaults but is also field programmable. A variety of housing options are available (shown below), from standard IP41 enclosures to IP66 water resistant housings, which allow the MGS-150 Series gas sensors to be placed in the toughest of conditions.

Ideal for Commercial and Industrial Refrigeration, Food Storage and Food Processing Facilities, Supermarkets, Parking Garages, Wastewater Treatment Facilities, Hospitals and Universities.

Features & Benefits:

• Infrared, semiconductor and electrochemical sensor options to meet almost any gas detection need - at the most affordable cost.
• User-selectable analog outputs: 4-20 mA, 0-5V, 0-10V, 1-5V, 2-10V featuring 12/24 VAC/VDC operation.
• Fast-response sensors detect leaks quickly, which protect personnel and minimize refrigerant gas usage and environmental impact.
• Long-life semiconductor sensors for detection of all refrigerants, ammonia, halocarbons, combustible gases & VOCs.
• Robust design and remote sensor options allow units to be placed directly in areas where detection is needed.
• Available in a variety of housings, including IP66 and duct mount, for placement in the toughest of environments.

*Please note we can only ship RKI products to customers within the United States

81-SDME2-02 SDM-E2 Stand Alone Calibration Station for Eagle 2, with AC Adaptor, Flash Drive, USB Cable, Tubing, Installation CD, & Demand Flow Regulator by RKI Instruments

Stand Alone Calibration Station

Multi Module System

Stand Alone Station Features

• Stand-alone station (no connection to PC Required)
• Charging (NiMH batteries)
• Calibration
• Bump Test
• Save bump test and calibration records
• Bump test and calibration records copy to USB jump drive
• 2 Calibration gas ports
• Includes PC software for viewing/archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Configure Eagle 2 parameters
• 2 Calibration gas ports
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Automatic calibration/bump test option
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

MISC-UV-s2 MiScope Digital Microscope with White and UV Illumination by Zarbeco

The MiScope (pronounced My-Scope) now brings portable UV imaging to a new level. It combines a digital movie camera, precision optics, white and UV LEDs into a microscope that fits in the palm of your hand.

Magnification of 40-140X lets you view a larger area in white or UV light to identify an area of interest, then zoom in to view fluorescent inks, dyes, or tracer fibers. Capture images or movies, easily add labels, make measurements, and even draw right on the live video image.

The 3-position switch lets you choose between visible and UV illumination. Or turn the LEDs off and use an external light source or light table.

Features

• View live and capture images on the computer screen (or use a computer projector for large groups)
• 40 - 140x magnification
• 3 position switch: white LEDs/all off/UV LEDs
• Completely portable with a laptop computer
• Save still images, movies and time lapse
• Labels, markers, time stamps, measurement
• Draw directly on the live image
• Print, e-mail, or import into other programs such as Power Point, Word, and Photoshop
• Includes Video ToolBox PC Software (optional Video Toolbox PRO Software)

Application

• Forensic Sciences
• Manufacturing
• Field Sciences
• Collectibles
• Education

Computer Requirements

• Pentium III 500MHz or greater
• Windows 2000/XP/VISTA/7/8
• MAC OS X 10.6+ (Mac Software Optional)
• DirectX 8.1 or greater
• Internet Explorer 5.0 or greater USB port

SPXCDALMRFD Sensepoint XCD RFD Transmitter with LM25, ATEX/IECEX & AP approved by Honeywell Analytics

Sensepoint XCD RFD is your most flexible, practical choice for remote flammable gas monitoring in Class I Division 1 areas.

XCD RFD adds safety, productivity and cost efficiency to an operation by extending intelligent, simplified gas monitoring to hard-to-reach areas. XCD's inherent flexibility (through its modular product design and remote monitoring options) is stretched further to help make an operation run more smoothly and easily, adding bottom line value on top of state-of-the-art safety benefits.

You can mount the sensor up to 100 feet away from the transmitter, so even the most hard-to-access areas can be monitored and protected. What's more, XCD RFD tells you at a glance whether your equipment is operating properly and keeping you safe. You get continuous, long-term value by conveying accurate gas readings through a rugged, reliable sensing technology, a hallmark of Honeywell. XCD RFD saves you money over the life of your monitoring system.

High Value Sensing Technology

• Poison-resistant catalytic bead sensors offer reliable, long-lasting sensing life in an explosion-proof assembly
• Low power consumption, reducing cost of ownership
• Accurate detection with fast response

Easy-Mount Utility

• Mount transmitter in easy to access area even if sensor is located in difficult or restricted access area
• Mount sensor up to 100 feet from transmitter
• Mounting hardware available for pipe, duct and junction box installations

Easy to Use

• Easy to read tri-color backlit display with digits, bar graph and icons
• Fully configurable via non-intrusive magnetic switches
• Selectable sink or source 4-20mA output
• Auto-inhibit during maintenance prevents false alarms

Cost Effective

• Common transmitter platform: monitor full range of flammable gases
• Longer sensor life compared to electrochemical sensors
• Simple operation cuts training costs
• Reduced spares and stock costs
• Non-intrusive, one-man operation reduces maintenance cost
• Optional Modbus adds diagnostic capabilities and advanced intelligence to further reduce costs

PC8025-B Potassium Chromate Indicator Solution, 5% w/v, 60mL by AquaPhoenix

• APHA for Chloride, 4500-B

Specifications

• Packaging Type: Poly
• Size: 60 mL
• Concentration: 5%w/v

00085D 86ASU Air Sampling Unit - for Cast Iron Junction Box Detector (TXgard/Flamgard-D, Flamgard4-20) by Crowcon

The Air Sampling Unit (ASU) is designed to be used with Crowcon s Xgard range of detectors for monitoring potentially hazardous gases within ventilation ducts.

Features:

• Enables air ducts to be monitored without requiring the detector to be mounted within the duct.
• Avoid sensor drift due to air-flow effects.
• Simple, easy to install design.
• Simple detector maintenance: there is no need to access the duct for calibration purposes.
• Extremely reliable; ASU has no moving parts.

724-068-05 Eagle 2 Portable Monitor for CH4 (100% LEL/100% Volume (IR) Autoranging)/O2/HS/CO2 60% Volume (IR) by RKI Instruments

Continuing in its legacy of durable and reliable gas detection and monitoring systems, RKI Instruments is proud to offer a new product in its popular Eagle portable gas detector series. The Eagle 2 can monitor up to 6 different gases and is equipped with several exclusive features that can only be found with the Eagle series. In addition, its large glove friendly push buttons and LCD screen ensure an ease of use when onsite. Rated intrinsically safe, the Eagle 2 is equipped with state of the art technologies that are not available with other competitive gas detectors and monitors.

Specialty Sensors

The Eagle 2 has a variety of available specialty sensors. Workers can use a photoionization detector for low or high range VOC detection and Fence Electrode Technology for humidity and contamination resistance. An infrared sensor is available for Co2, % LEL CH4, % Volume CH4, % LEL HC, and % Volume HC. Thermal conductivity sensors are available for % Volume H2 and % Volume CH4. The unit is also compatible with the smart plug and play toxic sensors for the detection of NH3, AsH3, CI2, HCN, PH3, and SO2. With the wide variety of sensors and gas detection available, the Eagle 2 can be customized to meet almost all worksite gas detection needs.

Exclusive Features

The monitor has a long internal pump that can draw samples for up to 125 feet. The pump features a low flow auto shut off and alarm. This allows operators to respond swiftly from a safe distance. The unit is multilingual with 5 different language preferences, and features an alkaline battery life of 18 hours or a NiMH life of 20 hours. To protect the integrity of the device and the configurations, the unit can be password protected. The Eagle 2 also has standard data logging capabilities for easy research, evaluation, and site monitoring. To reduce calibration costs and time, the unit features an automatic calibration option and a single gas calibration option.

The Eagle 2 is heavily protected from environmental conditions by a weather proof, chemical resistant RFI/EMI coated high impact polycarbonate/PBT blend enclosure. The enclosure also renders the unit water and dust resistant. Because of the enclosure, the Eagle 2 can function in 2 inches of water without leakage.

Eagle 2 Specifications

The portable and durable unit is lightweight at less than 4 pounds. Its dimensions are suitable for convenient carrying (9.5?L x 5.25?W x 5.875?H), and it features a conveniently placed durable top handle. The large easy to read display has a polyurethane overlay backlights on demand and when the alarm is activated. The 2 alarm channels are fully adjustable for the user and can be password protected. With a 95 dB buzzer and 4 high intensity LEDs, the alarm is sure not to be missed. The Eagle 2 is standard with a 2 year warranty for material and workmanship and a 1 year warranty for PID sensor.

*Please note we can only ship RKI products to customers within the United States

MW806 pH/EC/TDS/Temp Portable 4 In 1 Logging Meter by Milwaukee

This Milwaukee High Range MW806 MAX pH/EC/TDS/Temp. 4-in-1 combo meter allows you to measure pH, EC (conductivity), TDS and Temp. with a single meter and one single probe.

WHAT PEOPLE ARE SAYING

• "Features look Great! Can't wait to order!
• "Great customer service, I have other Milwaukee meters."
• "These prices are unreal!"
• "Logging feature will be awesome!"

SUMMARY

pH and conductivity are critical for growers. pH can effect plant nutrient and water uptake and reduce the efficiency of fertilizer, herbicides and pesticides. Managing conductivity helps growers pinpoint fertilizer and other needs.

The Milwaukee MW805 MAX Combo Meter lets you easily and accurately test pH, conductivity and total dissolved solids (TDS) using a single meter and integrated probe.

Simple, portable and rugged. No more juggling multiple electrodes and wires. Automatic temperature compensaton included.

The MW805 MAX is the ultimate solution for pH and nutrient management.

DESIGN FEATURES

The design of the MW806 MAX is focused on simple operation and ruggedness. With a single probe, big screen, easy calibration, the MW806 is exceptionally simple to operate.

A tough meter build and a rugged but replaceable probe means that you can expect years of use.

The Milwaukee Combo meter offers:

• pH, conductivity / nutrient EC, TDS (ppt) with automatic temperature compensation.
• Selectable TDS factors from .40 to 0.8; defaulet value 0.50.
• Stability indicator prompting the user when the readings stabilize.
• Dedicated GLP key to store and recall data on system status.
• A replaceable, Amplified Combination pH/EC/TDS/Temp probe with a single 3 foot cable (1 meter) for easy use (MA852D/1 probe included)
• A cloth junction on the pH sensor to reduce contamination when measuring fertilizer solutions. Gel filled for long lasting measurments.
• A light weight and portable form factor at just 9.2 ounces (260 g) with battery and just over 3 inches wide.
• A large easy to read display.
• Factory calibration for Temperature and simple, highly accurate, single cell automatic, one point calibration for EC and an automatic up to 5 point calibration for pH.
• IP 67 rated rugged case built for field or lab applications.
• Specialized design for hydroponic, aquaponic, and greenhouse growers.

CARE AND USE

The High Range MW806 MAX Combo Meter includes both a pH and EC sensor in the MA852D/1 Amplified probe. Both need maintenance. Properly maintaining your probe will give you fast, accurate results for longer. All pH sensors have a limited life and response time gets longer with age. EC sensors are more robust but can still be affected by residue build up.

Here are our top four tips.
1. Always store with the cap full of buffer or storage solution not water.
2. Clean your probe regularly by soaking in cleaning solution.
3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH and EC sensor.
4. Gently stir the probe in the sample for a faster result.

2811-727-002 EC 28 Gas Transmitter with Sensor, Oxygen (O2), Display by GfG

Advanced Technology

Wherever hazards are expected, the EC 28 transmitter and GfG s proven monitoring systems are the right choice for reliable surveillance. The ATEX-certified design, an integrated, Ex-proof buzzer, and bright alarm LEDs provide the highest safety in hazardous areas by including visual and audible alarms. The gas alarm not only alerts the person in the control room of hazards, but also the person on-site.

Easy handling

Smart sensor technology allows a user to install the transmitter or to replace a sensor within a few seconds just plug the sensor into the transmitter. Adjustments are done directly at the transmitter using touch keys or with the remote control (one-person calibration).

Remote Control RC2

Ammonia and hydrogen are lighter than air. With the transmitter installed close to the ceiling, GfG can provide permanently connected cables with plugs for the remote control, which allow the user to do all adjustments without having to climb a ladder. In addition, one remote control can be used for several transmitters, which helps cut costs and increase efficiency.

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

The EC 28 DAprovides additional bright alarm LEDs and a buzzer avoiding costs for a separate Ex-proof horn and an Ex-proof light. You also save money on wiring to connect the controller and alarm devices.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

• Reading of gas concentration at transmitter display
• Ex-proof visual and audible alarms
• ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
• One-person calibration at transmitter using touch keys or remote control
• Plug-in smart sensor sensor replacement without opening the casing

Advantages

• Concentration display at transmitter or at remote control
• ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need for expensive Ex-proof buzzer or wiring
• Easy sensor replacement by means of plug-in smart sensors
• Long sensor life
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

ED2070-B Hardness Titrant High, 60mL by AquaPhoenix

Specifications

• Packaging Type: Poly
• Size: 60 mL

1450-405R2 DS404 Four Inlet Multi-gas Docking Station - Double Cradle (Instrument & Pump) with 2 Regulators by GfG

Easy operation

The operation of the DS404 docking station couldn't be any easier. Simply put the G450 or the G460 in the dock and the system will take over from there. The DS404 automatically performs a full functional test including fresh air calibration, bump test, extensive sensor tests, alarm tests and optionally performs an automatic AutoCal® calibration.

Extensive diagnostics

The DS404 is designed to go beyond the traditional basic docking station tests and includes sensor diagnostics tests such as T50 and T90. After all, what good is a sensor that can respond to gas when it takes too long to get there? With the DS404 you can have confidence with this added level of safety.

Automatic charging

After all tests have been completed the DS404 will automatically start the charging process of the detector or you may remove and begin using it. In case the detectors battery condition is insufficient to complete a test the DS404 will charge the instrument before performing the test.

Record Keeping

A good instrument gas detection maintenance program is not complete without equally good records keeping. Whether you choose to download or maintain the records on a PC or network or your preference is to leave it to the docking station, the DS404 is the right choice.

The DS404 can retain as many as 2 million complete diagnostics in memory with maximum memory installed. That is over 50 years of data even if testing 100 detectors every single day!

Reduced cost of ownership

The DS404 is designed to reduce the cost of ownership every step of the way. The built in pump has variable flow control to reduce the amount of gas consumed during the test. The DS404 is even smart enough take advantage of the gas remaining in the tubing after the previous test was completed.

PC communication

The DS404 comes complete with USB interface cable and download software. The SD card may also be downloaded using a standard SD card reader.

Maintenance certificates

quickly print official calibration or bump test certificates. Simply download the records from the DS404 and start the "Certificate Generator" it takes only seconds!

Features

• Four test gas ports
• Fully automatic functional bump test and calibration
• Automatic test of alarms
• Automatic charging
• Automatic record keeping
• Simple pass / fail indication
• Cascade multiple docking stations
• Saves last calibration and bump test records in detector for easy retrieval of maintenance record in the field
• No computer necessary
• Up to 2,000,000 records in memory
• Saves times, gas and efforts for lower cost of ownership
• Print official calibration certificates