$750 - $1000

TXISP-CO-SIDE-Sira-500 TXgard-IS+ Toxic Gas Detector with Display, Carbon Monoxide 0-250, 500 ppm by Crowcon

TXgard-IS+ is a Intrinsically Safe (I.S.) toxic and oxygen gas detector with local LCD display. A wide choice of sensors are available for use in a variety of applications.

Features:

Non-intrusive calibration

• Calibration can be performed locally without the need for hot work permits
• Local display and buttons enable calibration without opening the junction box

Flexible output options

• A two-wire 4-20mA signal is provided
• The output can be forced up without applying gas to enable simple checking of control systems and alarms.

Rugged and reliable

• Constructed using highly durable GRP to provide good impact resistance
• Ingress protection to IP65 as standard, IP66 with accessory
• IEC61508 SIL compliant

5201-1003 GDC-150 Gas Sensor Transmitter, NEMA 1 Housing, O2 Sensor by Bacharach

The all new GDC-150 transmitter from Bacharach offers detection and protection for a wide range of hazards including toxic gases such as carbon monoxide (CO), oxygen depletion, combustible gases, refrigerant leaks and total volatile organic compounds (TVOCs). Analog interfaces allow the transmitter to be connected back to Bacharach's GDA Series of controllers (or any other gas detection controller), building management systems or control systems. The GDC-150 features 4-20 mA or 0-10 VDC linear output signals, an automatic thermal resetting fuse, RoHS compliant circuit boards and LED indicators for power and open loop.

The onboard alarm LED's indicate when alarm threshold values are exceeded. The unit can be ordered with an optional alpha numeric LED display that shows gas concentrations in real time while alarm relays alert personnel of potential dangers, avoiding incidents and potential hazards.

The GDC-150 is packaged in a rugged, polycarbonate housing for both indoor and outdoor applications. When leaks occur, the GDC-150 sensors respond quickly and accurately to protect people and property. Automated calibration and simple maintenance procedures performed in the field allow for continuous operation and assurance that areas are monitored and protected at all times.

MicroRAE Wireless Four-Gas Monitor by RAE Systems

The MicroRAE four-gas portable detector brings enhanced user-friendliness and flexibility to wireless gas detection. This enables continuous, instant visibility of safety threats for faster, more informed decisions, to protect workers, facilities, and the environment, and to optimize operations.

The MicroRAE is a wireless diffusion detector that simultaneously monitors up to four gases, including hydrogen sulfide, carbon monoxide, oxygen and combustibles (LEL). With its different wireless connectivity options the MicroRAE can deliver real-time instrument readings and alarm status to other wireless offerings such as ConneXt Plus, ConneXt Pro, ConneXt Loneworker4 and Safety Communicator.

• Man Down Alarm with real-time remote wireless notification1
• GPS module for location
• Bluetooth® low energy connection to a Smart Phone device for uplink data communication and device configuration
• Remote notification and Panic function
• Fully automated bump testing and calibration with AutoRAE 2

Industries

Personal protection and general safety and compliance in:

• Lone Worker Applications
• Oil and Gas
• Waste water treatment
• Utilities
• Telecommunications
• Firefighting
• Petrochemicals
• Construction

Optional Accessories

• AutoRAE 2 Automatic Test and Calibration Systems
• Gang Charger (5 units)
• Auxiliary filter
• Hand pump kit
• Truck mount charger

Features & Benefits

• Honeywell ConneXt compatible with Mesh and Wifi wireless configurations
• Compact and lightweight
• IP-67 water and dust-resistant case
• Strong, protective, concussion-proof design
• Real-time gas concentration readings, location, alarm and status enabled by state of-the-art wireless technology
• Unmistakable five-way local and remote notification of alarm conditions
• Short bump test and calibration time
• Global approval for worldwide acceptance
• Filtered LEL sensor options to inhibit sensor poisoning
• Compatible with Safety Communicator
• Device Management with Honeywell SafetySuite

MGC Multi Gas Clip Detector with Infrared Sensor by Gas Clip Technologies

Battery life for months instead of hours!

Day in, day out, your workers have to charge their portable multi gas detectors so they can keep testing for the presence of combustible gases, H2S, CO, and O2. Unfortunately, sometimes they may forget to do so. Gas Clip Technologies can help prevent this safety risk with our new Multi Gas Clip (MGC). It has the longest battery life of any portable gas detector by a long shot.

The new MGC can go a full 2 months without a charge, even without ever having to be turned off. Shut down the unit nightly and the battery can last up to 4 months. What s the secret of the MGC s extended battery life? It uses low-power photo-metric technology for the detection of the combustible gases (LEL). Instead of draining the battery with archaic pellistor technology, the MGC uses an IR source. This conserves power, so the battery lasts and lasts and lasts.

The MGC also eliminates the need to frequently calibrate portable gas detectors. It can go 6 months without being calibrated. That saves time and increases efficiency. Each Multi Gas Clip, IR version, comes with the following features:

• 2 month battery life (continuous run time)
• 6 month calibration cycle
• Will work in inert environments, no need for oxygen
• Simple to use
• Bump/Calibration reminders
• Docking station compatible
• Programmable user ID
• Compact and lightweight
• Low maintenance cost
• 100% quality control testing

10154072 Altair 2XT Two-Tox Gas Detector, CO/H2S-LC (CO: 25, 100; H2S: 5, 10), Charcoal by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

5201-1130 GDC-150 Gas Sensor Transmitter, NEMA 1 Housing, MOS Combustible Sensor w/Display by Bacharach

The all new GDC-150 transmitter from Bacharach offers detection and protection for a wide range of hazards including toxic gases such as carbon monoxide (CO), oxygen depletion, combustible gases, refrigerant leaks and total volatile organic compounds (TVOCs). Analog interfaces allow the transmitter to be connected back to Bacharach's GDA Series of controllers (or any other gas detection controller), building management systems or control systems. The GDC-150 features 4-20 mA or 0-10 VDC linear output signals, an automatic thermal resetting fuse, RoHS compliant circuit boards and LED indicators for power and open loop.

The onboard alarm LED's indicate when alarm threshold values are exceeded. The unit can be ordered with an optional alpha numeric LED display that shows gas concentrations in real time while alarm relays alert personnel of potential dangers, avoiding incidents and potential hazards.

The GDC-150 is packaged in a rugged, polycarbonate housing for both indoor and outdoor applications. When leaks occur, the GDC-150 sensors respond quickly and accurately to protect people and property. Automated calibration and simple maintenance procedures performed in the field allow for continuous operation and assurance that areas are monitored and protected at all times.

Xgard Gas Detectors

Crowcon is a global leader in designing and manufacturing gas detection technology and equipment. The company has been in operation for over 40 years and is consistently building upon its products. By integrating modern technology with the demands of the modern workplace, Crowcon has developed a line of gas detection devices and monitors that lead the competition. The Xgard range of gas detectors is a product of Crowcon s successful integration and technological advancements. With a wide range of sensor types and available accessories, the Xgard series is suitable for all worksites and is customizable enough to fit any needs.

Tough and reliable

The Xgard series of fixed point gas detectors is incredibly durable and reliable. The casings and materials, including weatherproof caps, are designed to protect the equipment from the harshest environments. The detectors are made from a variety of materials depending on the model: glass reinforced nylon, aluminum with polyester coating, and 316 stainless steel.

Variety of sensors

The fixed point gas detector offers a wide range of sensors for to suite almost all applications. The Xgard range of gas detectors is available in three models to meet varying worksite needs: flameproof, intrinsically safe, and safe area formats. Additionally, Xgard offers different types of fixed point gas detectors within these three models:

• Xgard Type 1- Intrinsically safe toxic and oxygen gas detectors
• Xgard Type 2- Flameproof toxic and oxygen gas detectors
• Xgard Type 3- Flameproof flammable gas detector
• Xgard Type 4- Flameproof high temperature flammable gas detector
• Xgard Type 5- Flameproof flammable gas detector with 4-20mA output
• Xgard Type 6- Flameproof thermal conductivity type gas detector
• Xsafe- Safe area flammable gas detector

Cost efficient and highly effective

With quick and easy installation and maintenance, the Xgard series is able to keep costs at a minimum. The replacement sensors, for example, are simple to replace by merely plugging them in. The replacement parts are also readily available and compatible with all Xgard models, thereby reducing the amount of required spare parts that are stored in the facility. Additionally, the sensors have two times the typical life spans of similar sensors in the industry. With a 2 year life span, worksites can expect to cut their sensor replacement costs in half. For worksites that require slightly more customization, Crowcon offers compatible accessories for the Xgard series such as sampling applications, remote gassing applications, spray deflectors, sun shields, weatherproof caps, collector cones, flow adapter, and accessories adapter.

Xgard also has flexible installation options. The unit is designed for either wall or ceiling mounts, and users will not need to purchase additional equipment for mounting. For more complex installation needs, users can purchase accessories.

Specifications

Each model is approximately the same size with dimensions of 6.1 x 6.5 x 4.3 inches and weighing approximately 1 or 2 pounds. The battery type, electrical output, and power requirements vary based on the sensor type. For a complete listing of gas sensors, types, and individual specifications, please see the product specifications listing.

72-0233RK GX-2001 Personal Four Gas Monitor, 4 Gas, LEL/O2/H2S/CO with Belt Clip, No Charger (Check Availability) by RKI Instruments

RKI is proud to offer the smallest 4-gas monitor in the world, the GX-2001. Weighing only 6 ounces and about the size of a pager (2.8" H x 2.2" W x 1.1" D), the GX-2001 simultaneously monitors combustibles, oxygen, carbon monoxide, and hydrogen sulfide. The GX-2001 is armed with standard features like a vibration alarm, autocalibration, datalogging, rechargeable Ni-MH battery pack, STEL / TWA readings, peak hold and auto backlighting at alarm on a large LCD display, and it even tells the time! All of these controls and features are operated through 3 simple glow in the dark buttons. Utilizing either the standard charger or datalogging / charger station, the Ni-MH battery pack will operate for 18 hours and fully recharge in 90 minutes. Also available is the datalogging software program which is Windows 95, 98, ME, and XP compatible. The GX-2001 is also compatible with the Data Cal 2000 instrument maintenance system and SM-2001U calibration station.

The GX-2001 is designed around the world's smallest gas sensors. Utilizing catalytic combustion, electrochemical and galvanic sensor technologies, each miniaturized sensor is manufactured with the same high quality control that has made RKI sensors and instruments the most reliable and long lasting monitoring devices in the industry.

Features

• Simultaneous detection of 4 gases LEL, O2, H2S and CO
• Smallest 4 gas monitor on the market 2.8" H x 2.2" W x 1.1" D, 6 oz.
• Audible, visual, & vibration alarms
• Alarm trend data
• Datalogging standard
• Autocalibration
• Rechargeable Ni-MH battery pack
• Battery pack recharges in 90 minutes
• Continuously operates for up to 18 hours
• Large LCD display screen
• Automatic backlighting at alarm
• High impact, RFI shielded body
• STEL and TWA readouts (USA Version)
• Continuously displays current time
• Intrinsically safe, CSA, C / US
• 2 year warranty

Applications

• Personal monitoring
• Confined spaces
• Refineries / petrochemical
• Utilities
• Chemical plants
• Hazardous material
• Water / wastewater treatment
• Fire services
• Mining

*Please note we can only ship RKI products to customers within the United States

VPE-GN (Gooseneck) Ultrasonic Leak Detector by Superior AccuTrak

The Patented Superior AccuTrak® VPE-GN Gooseneck represents state-of-the-art technology for pinpointing leaks in air conditioning and refrigeration systems. The new 9½ flexible Gooseneck provides better detection in hard-to-reach places, and is great for automotive applications too. AccuTrak® is extremely sensitive to the ultrasonic sound of a turbulent gas leak. Using the latest "heterodyning" technology it translates the sound to a lower frequency which your ear can interpret. The VPE-GN maintains the original sound characteristics making it possible to distinguish leaks from other competing background sounds. AccuTrak® is so sensitive you can actually hear the blink of an eye, yet most background noise will not interfere with detection accuracy. Like all Superior AccuTrak® instruments, the VPE-GN easily detects leaks of ANY gas or refrigerant, compressed air, and even vacuum leaks.

VPE-GN - Standard Kit

Superior AccuTrak® advanced patented technology has never been so versatile! The AccuTrak® VPE-GN Standard Kit offers all the functionality and features of the VPE Basic Kit but with the sensor on the end of a 9-1/2 long flexible GooseNeck to get into all those hard-to-reach places. The VPE-GN Standard Kit is great for technicians in the Automotive industry, or any others who need to find tough leaks or other airborne ultrasound in tight spaces, behind obstructions, or inside an assembly. As with all AccuTrak® instruments, the VPE-GN finds leaks for any kind of gas or refrigerant without changing tips or components. Works equally well to find compressed air leaks, nitrogen leaks even vacuum leaks! AccuTrak® can find leaks as small as the equivalent of 1.5 oz per year of refrigerant, or can hear a 5 psi leak up to 30 feet away.

Kit Includes:

• VPE-GN Leak Detector
• Headset
• Battery
• Hard Case
• Waveguide

VPE-GN - Professional Kit

The AccuTrak® VPE-GN Professional Kit is designed for technicians who work in noisy places, or who regularly need to find smaller leaks. With the sensor at the end of the 9-1/2 long flexible GooseNeck you get full sensitivity all the way into those hard-to-reach places. The VPE-GN Professional Kit includes all the great features of our VPE-GN Standard Kit upgraded with professional Noise Cancelling Headphones and a larger case to keep everything together. These high quality headphones eliminate all background noise, allowing a technician to effectively find the smallest leaks even in very loud environments. You can choose the standard style professional headphones, or the hardhat compatible version same price!

Kit Includes:

• VPE-GN Leak Detector
• Battery
• Waveguide
• Noise Blocking Headphones
• Large Carry Case

VPE-GN - Plus Kit

The AccuTrak® VPE-GN Plus Kit is designed for technicians looking to take full advantage of all the VPE-GN s many capabilities. The VPE-GN Plus Kit includes everything in our Standard Kit PLUS our powerful Burst Tone Sound Generator! The sophisticated Burst Tone can artificially pressurize any vessel or space with ultrasonic sound, allowing a technician to quickly scan for leaks even where there is no actual pressure differential! The VPE-GN Plus Kit is ideal for technicians who test refrigerator door and window seals, or any other non-pressurized seal or vessel. The VPE-GN Plus Kit is also great for Energy Audits and Surveys, and finding air leaks and sources of air infiltration in homes, aircraft, ships, and buildings.

Kit Includes:

• VPE-GN Leak Detector
• Headset
• Battery
• Hard Case
• Waveguide
• Sound Generator

VPE-GN - Pro-Plus Kit

The AccuTrak® VPE-GN Pro-Plus Kit is our most comprehensive VPE-GN Kit, for the serious technician who needs the maximum capability from an ultrasonic instrument with a GooseNeck. The VPE-GN Pro-Plus Kit includes the upgraded professional Noise Cancelling Headphones PLUS the powerful Burst Tone Sound Generator, in the larger case to keep everything together. The VPE-GN Pro-Plus Kit offers unrivaled functionality and versatility for a fraction of the cost of any competitive system with similar performance. Find any kind of leak, in any environment, find bad gaskets and door seals and do it all well, in hard-to-reach places you can t even see! If you do a variety of work, and need a cost effective professional kit that can do it all, the Superior AccuTrak® VPE-GN Pro-Plus Kit is for you.

Kit Includes:

• VPE-GN Leak Detector
• Battery
• Waveguide
• Sound Generator
• Noise Blocking Headphones
• Large Carry Case

Applications:

• Leak Detection: Air, Vacuum, Refrigerants; ANY GAS!
• Steam Traps: Detect live steam loss in seconds!
• Valves: Detect/hear internal leakage in check, ball, needle, gate or any type of valve! Diagnose thermal expansion valves in just five minutes!
• Bearing Wear: Hear wear and lubrication problems before damage is done!

Features:

• Gooseneck Configuration: allows operator to get accurate readings in hard to reach places.
• Audio Output: 0 Hz to 4 kHz Natural Sound conversion allows you to Hear the Leak, and distinguish leaks from mechanical or other background ultrasound.
• Visual Output: 10 element bar graph provides quick and intuitive visual indication to presence of and relative strength of ultrasound.
• Adjustable Sensitivity: allows operator to quickly identify leaks from a distance, and then zero in on the exact location of the leak.

Capabilities:

• Capable of detecting a 5 psi leak out of a 0.005" (5/1000 inch) hole, 20 to 30 feet away depending on background noise.
• Easily detects any gas that generates ultrasonic sound during flow including vacuum leaks.
• Capable of detecting leaks equivalent to 1.5 oz/year of Refrigerant.
• Works equally well for compressed Air or Nitrogen.
• Not affected by wind or high concentrations of leaked gas or refrigerant.

Kits for Every Application

Whether you only need the basic functions of the VPE-GN or you plan to take full advantage of the instrument's diverse capabilities, we have a kit that will meet your needs! Click the "Find Your Kit" tab above to learn more.

Advantages Versus Sniffers

• AccuTrak® VPE is a much more accurate and reliable instrument for detecting single and multiple leaks.
• AccuTrak® VPE can detect any type of refrigerant gas including nitrogen.
• AccuTrak® VPE detects both vacuum and pressure leaks.
• AccuTrak® VPE is effective in gas saturated areas and under windy conditions.
• AccuTrak® VPE does not require the introduction of tracer gases into the system, which can be ozone depleting when vented, and can also be harmful to ones health.
• AccuTrak® VPE is battery powered for cordless operation

Advantages versus other Ultrasonic Leak Detectors

• AccuTrak® VPE is #1 in technology. We wrote the book on ultrasonic leak detection, our patented instruments lead the industry!
• AccuTrak® VPE is the original! it is not a copy.
• AccuTrak® VPE is the most durable unit available, with the best warranty. The face of the unit is sealed with no pin holes/speakers for foreign objects to enter.
• AccuTrak® VPE has more dynamic range, and wont overload in loud areas.
• AccuTrak® VPE gives true audio sound reproduction instead of the "beeps and squeals" of other instruments.

*Please note we can only ship RKI products to customers within the United States

1309A0051 E3Point Gas Monitor without Sensor, Duct Mount, Modbus/BACnet 24VAC/VDC by Honeywell Analytics

Toxic/combustible gas monitor that makes a commercial operation run more intelligently to protect people, property and the bottom line.

Product Overview:

E3Point is capable of detecting the widest range of toxic and combustible gases found in commercial building spaces and outbuildings, including CO, NO2, O2, H2, H2S, CH4 and C3H8. It can be used as a standalone unit with single or dual-gas detection (i.e. using a remote sensor) or deployed as a networkable device (interoperable with BACnet, Modbus or other Building Automation System): E3Point also functions with existing controller-based gas monitoring systems and wired-wireless gas monitoring system components.

E3Point uses Demand Control Ventilation—through relays, Building Automation System (BAS) or controller—to increase energy savings, extend fan life and align with green building best practices. In its network configuration, E3Point also optimizes HVAC, fire/smoke, surveillance and other building systems performance.

Intelligent product design reduces the unit's cost of ownership while increasing flexibility of application. Smart sensors are pre-calibrated, auto-configure upon set-up and operate continuously on patented Reflex© technology which continuously monitors sensor cell condition and alerts user to fault status. The plug-n-play sensor cartridge, user-friendly menu and wiring options simplify installation and maintenance, and reduce the cost of gas monitoring over the life of the unit.

Flexible Operation:

• Comes in standalone, standalone with remote (dual gas mode) or network versions
• Connects to analog or digital systems
• Works with virtually any BAS including BACnet and Modbus
• Connects to wired or wireless system (via 301CW wireless controller)
• Wall or duct mount
• Factory-calibrated cartridges

Cost Effective:

• Saves energy through Demand Control Ventilation (DCV)
• Simplifies installation/maintenance through plug-n-play sensor
• Remote sensor option provides dual gas monitoring (standalone version only)
• Optimizes BAS, fire, ventilation and other security systems

Versatile Communications:

• Works through BAS to improve fault diagnostics and collect data on gas concentration levels, sensor condition, etc.
• Couple with 301C to log data and daisy-chain up to 96 E3Point units

Advanced Sensing Technology:

• Detects CO, NO2, O2, H2, H2S, CH4, C3H8
• Advanced electrochemical (for toxic gases)and catalytic bead (for combustible gases) sensor performance
• Uses patented Reflex® and smart cartridge technologies

Electrical Certifications:

• US (ANSI/UL 61010-1)
• Canada (CSA C22.2 No. 61010-1)

Features & Benefits:

• Standalone, standalone with remote (dual gas mode) or network versions available
• Saves energy through Demand Control Ventilation

Quick Specs:

• Complete toxic and combustible gas detection system with onboard sounder
• Available in single point or dual gas options
• Analog 4-20 mA or Digital outputs (Bacnet, Modbus, and Lonworks)

1418-131 Micro IV Single Gas Detector with 2-Year Sensor Warranty, Hydrogen (H2), 0 -0.01 vol. by GfG

Durable, compact design

Widest Range of sensors

Easy Operation

Up to six months of battery life

Clip-on attachment

Optional motorized pump

Large graphic display

Audible, vibrating and visual alarms

Lifetime warranty

DS220 docking station

Features

• Highly configurable smart sensor design
• Wide range of sensors including O₂, H₂S, CO, NH₃, SO₂, CL₂, CLO₂, PH₃, NO₂, HCN, HCl, ETO, HF, O₃, NO, H₂, THT and more!
• Full 3-year warranty on O₂, CO and H₂S sensors
• Optional sample draw pump
• Large display with real-time readout
• Event / Datalogging standard
• Programmable ceiling (3), STEL & TWA alarms
• Vibrating Alarm standard
• AutoCal® automatic calibration
• Optional docking station

Standard Accessories

• Micro IV detector
• Specified Sensor
• Alkaline Battery
• Rubber Boot
• Manual

CP-I-W5X1H100-B-00 BW Icon+ Multi-Gas Detector, %LEL(IR) O2 H2S  Black by BW Technologies

Serviceable four-gas detector with a choice of six sensors — Honeywell BW™ Icon+ delivers an icon-based experience in a serviceable package. It enables you to maximize the lifespan of your four-gas detectors, optimize long-term cost of ownership and select from multiple gas sensors for flexible applications.

ICON DISPLAY FOR FAST DECISIONS

Like the fixed-life Honeywell BW™ Icon, Honeywell BW™ Icon+ is named for its firstin-the-industry display of simple icons for gas levels and device status. That means no live gas readings for workers to interpret and no time-consuming training. Instead, when there's a gas alarm, the bell icon on the display will illuminate, along with an indicator next to the sensor in alarm, so workers can quickly clear the area.

INTELLIGENT SENSORS FOR PREDICTIVE MAINTENANCE

How much life is remaining in the H₂S sensor, based on its age and gas exposure? When does the O₂ sensor need to be calibrated? Honeywell BW™ Icon+ has i-Series intelligent sensors that answer these kinds of questions, so you can take action and prevent unexpected downtime.

REPORTING AND ANALYSIS FROM YOUR SMARTPHONE

Want to see the full concentration of a gas or other information not on the icon-based display? Need to report a gas alarm? Simply download the Honeywell Safety Suite Device Configurator app, use Bluetooth® to pair your smartphone with the detector, and open the app to see the data — all organized in a report that's ready to send.

FEATURES AND BENEFITS

• RELIABLE: Two months of battery runtime on a 4.5-hour charge — and up to four months if you turn off the detector at the end of each shift. No daily charging, no unexpected downtime.
• COMPATIBLE: The Honeywell BW™ Icon+ is compatible with the IntelliDoX instrument management system and Honeywell Safety Suite and also with TouchConnect™ using Bluetooth® for wireless configuration.
• ACCURATE: Low-power infrared LEL sensor is immune to silicone poisoning, which means accurate monitoring of combustibles.
• EASY TO MANAGE: The IntelliFlash™ green light indicates when the detector is in compliance and the amber light indicates the need for maintenance.
• RESPONSIVE: 1series sensors respond to dangerous gas levels in seconds, even in harsh temperatures.
• EASY TO USE: Small, lightweight and wearable. One-button operation.

Part Number: CP-I-W5X1H100-B-00

2801-00-001 CC 28 Fixed Gas Transmitter, Base Unit (no sensor), No Display by GfG

Superior technology

In areas where combustible gas or vapor hazards may exist, GfG's new CC 28 combustible transmitter is the perfect choice for reliable area monitoring. With its proven design, this ATEX certified transmitter offers an integrated explosion-proof buzzer and bright-alarm LEDs for reliable warning of combustible gas hazards (even in hazardous locations). This superior design provides warnings for immediate personnel, and ensures entire plant safety.

Easy handling

Smart sensor technology allows easy installation. Sensor replacement takes only a few seconds-simply plug in the sensor. User adjustments are performed at the transmitter with simple touch keys, or with the optional remote control interface (one person calibration).

RC2 remote control

Several combustible gases are lighter than air. With the transmitter mounted close to the ceiling, calibration can be difficult. The remote control for the CC 28 allows you to perform calibration or zero adjustments without the need of a ladder or lift. A flexible cable connects the remote control to the transmitter and displays the same reading as the display on the transmitter. With the remote control inspection,service and calibration can be performed easily by one person.

The sensor and the integrated temperature compensation provide highest measurement accuracy.

Low maintenance requirements and long sensor life reduce your cost of ownership. Just sign a service contract and don't worry about any problems. We will service your system at regular intervals.

Models

Model CC 28D allows you to read the gas concentration both at the transmitter and at the GMA controller.With the RC2 remote control - the CC 28 is easy to use and to operate even if it is mounted at the ceiling.

Model CC 28DA provides additional warning with bright integrated alarm LEDs and a buzzer.

Features

• Full-featured smart transmitter for combustible gas measurement
• Non-intrusive calibration adjustment
• Expected sensor life of 5 years
• Increased safety design to reduce installation cost in potentially hazardous locations
• ATEX EEx dem [1b] IIC T4
• Proprietary, high performance combustible gas sensor
• Available in three configurations: Blind (no display), Display, Display with local alarms

Advantages at a glance

• Display of gas concentration at transmitter or remote control
• ATEX II G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need of expensive EX-proof buzzer or wiring
• Easy sensor replacement with plug-in sensors
• Long life sensor
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments by means of touch keys or remote control without opening the casing
• Easy handling even at hard-to-reach accessible transmitter positions.

Biosystems Multipro Confined Space Gas Detector

The BiosystemsMultipro Confined Space Gas Detector is a compact and efficient confined space detector. Understanding user needs and industrial applications, Sperian designed the detector with numerous features and optional accessories. The unit offers easy to read live gas readings and one button operations. The alarms are effective and unmistakable while on the site. The device is customizable and configurations are easy to adjust. With a durable casing, rubber molding, and a sleek design, the detector is the perfect handheld instrument for onsite gas detection needs.

Versatility and Customization

The gas detector is simple in design and compatible with many accessories designed to improve its versatility while allowing for user customization. Users can purchase accessories to customize the unit to fit their workplaces specific needs. Optional accessories include sampling pumps, calibration adapters, sample draw kits, and sample probes.

Key Features and Accessories

The BiosystemsMultipro Confined Space Gas Detector features a sleek and compact design with one button operation and an easy to read front mounted display with a backlight. An optional slip-on software controlled pump is available. The pump is powered by the BiosystemsMultiPro battery. It will indicate low flow and will perform an automatic leak test before every use. For recordkeeping, an automatic event logger and optional datalogging is available. The unit also features a Black Box recorder with over 40 hours of storage. When purchasing the detector, users will also receive.

• an operator s guide
• a training CD-ROM
• a charger for the rechargeable version
• a clothes clip
• a laminated quick reference guide
• a calibration adapter
• tubing

Sensors and Batteries

The unit is available with 3 sensors. Each sensor is user replaceable. The detector has a one button auto calibration with a calibration due reminder. The sensors are also capable of providing calibration for predictive maintenance. The confined space gas detector uses either interchangeable alkaline or rechargeable (Li-Ion) batteries. It also uses a drop-in charger while fully recharging in less than 6 hours.

Sperian Protection Instrumentation and Honeywell

Sperian Protection Instrumentation has over 50 years of industry experience in research and development. Because of its global reputation for dependable and reliable personal safety products, Honeywell announced its intent to acquire the company in 2010. Sperian Protection Instrumentation is now owned by Honeywell and has expanded Honeywell s offerings in the personal safety industries and the American market. Sperian is world renowned for design innovation and advanced technologies. With this acquisition, Honeywell intends to carry on Sperian s legacy of delivering innovative and advanced safety products.

10154077 Altair 2X Single Gas Detector, SO2 (2, 5), Charcoal by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

Part Number: SAIIL3D1

WD-35408-02 CON 600 Portable Waterproof Conductivity Meter by Oakton

Conductivity, TDS, resistivity, salinity measure from pure water to seawater!

• Durable waterproof and dustproof design with IP67 rating Even with no probes attached
• Single or multipoint calibration; auto or manual Fast, trouble-free calibration for more accurate measurements
• Large backlit graphic display Multi-line display with electrode status indicator, calibration data, and more
• User-settable calibration due alarm Out-of-date or unperformed calibrations are now things of the past!
• Built-in real-time clock Time-and-date stamping meets Good Laboratory Practice (GLP) standards
• Advanced data management Store up to 500 data sets and download via Infrared IrDA wireless interface
• Set point alarms Audible warning when readings are outside set points limit
• Accept 2-cell and 4-cell conductivity probes Measure over a broad conductivity range up to 500 mS/cm
• Password protection Security for calibration and setup menus
• Rugged rubber boot Protects meter from bumps and dings (optional; included with kits)

Biosystems Multipro Confined Space Gas Detector

The BiosystemsMultipro Confined Space Gas Detector is a compact and efficient confined space detector. Understanding user needs and industrial applications, Sperian designed the detector with numerous features and optional accessories. The unit offers easy to read live gas readings and one button operations. The alarms are effective and unmistakable while on the site. The device is customizable and configurations are easy to adjust. With a durable casing, rubber molding, and a sleek design, the detector is the perfect handheld instrument for onsite gas detection needs.

Versatility and Customization

The gas detector is simple in design and compatible with many accessories designed to improve its versatility while allowing for user customization. Users can purchase accessories to customize the unit to fit their workplaces specific needs. Optional accessories include sampling pumps, calibration adapters, sample draw kits, and sample probes.

Key Features and Accessories

The BiosystemsMultipro Confined Space Gas Detector features a sleek and compact design with one button operation and an easy to read front mounted display with a backlight. An optional slip-on software controlled pump is available. The pump is powered by the BiosystemsMultiPro battery. It will indicate low flow and will perform an automatic leak test before every use. For recordkeeping, an automatic event logger and optional datalogging is available. The unit also features a Black Box recorder with over 40 hours of storage. When purchasing the detector, users will also receive.

• an operator s guide
• a training CD-ROM
• a charger for the rechargeable version
• a clothes clip
• a laminated quick reference guide
• a calibration adapter
• tubing

Sensors and Batteries

The unit is available with 3 sensors. Each sensor is user replaceable. The detector has a one button auto calibration with a calibration due reminder. The sensors are also capable of providing calibration for predictive maintenance. The confined space gas detector uses either interchangeable alkaline or rechargeable (Li-Ion) batteries. It also uses a drop-in charger while fully recharging in less than 6 hours.

Sperian Protection Instrumentation and Honeywell

Sperian Protection Instrumentation has over 50 years of industry experience in research and development. Because of its global reputation for dependable and reliable personal safety products, Honeywell announced its intent to acquire the company in 2010. Sperian Protection Instrumentation is now owned by Honeywell and has expanded Honeywell s offerings in the personal safety industries and the American market. Sperian is world renowned for design innovation and advanced technologies. With this acquisition, Honeywell intends to carry on Sperian s legacy of delivering innovative and advanced safety products.