$75 - $100

Part Number: H1013800PN

Rugged+AED Self-contained Emergency Treatment (SET) System

The waterproof and conveniently organized First Aid Rugged+AED SET System comes with the First Voice™ Emergency Instruction Device (EID), AED, and prepackaged supplies color-coded by trauma; everything you need to safely address any first aid emergency! Meet and exceed OSHA and ANSI first aid compliance standards, and comply with OSHA Recommended First Aid Best Practices with the Rugged+AED SET System!

First Voice Rugged+AED SET System includes:

• First Voice EID; 3-year warranty
• HeartSine samaritan AED; 7-year warranty
• 7 color-coded zipper bags, velcro-attached to duffel bag
• Prepackaged supplies matching color-coded buttons on the EID
• First Voice Responder's Handbook (140+ pages)
• Pull-tight seal system to show "ready to run" status
• First aid report pad
• Bloodborne Pathogen Clean Up Kit
• AmpuSave
• Inventory refill checklist including expiration dates
• Emergency Information Pad for handoff to EMTs
• Front clear pocket of bag for storage of AED/defibrillator
• Extra supplies bag (band aids, wipes, tweezers, scissors, penlight, antibiotic ointment, and more) for any minor first aid incidents

Rugged+AED SET is ideal for...

• Real-time first aid situations
• Multi-level and large response areas
• Construction sites, schools, industrial plants, or any place of employment
• Remote areas where panic situations often occur
• Areas where 911 assistance will take over 10 minutes to arrive
• Improving the retention of first aid skills
• Reviewing accepted first aid and homeland security protocols

Part Number: H197160LM1

Part Number: H197150LM18

*Please note we can only ship RKI products to customers within the United States

08144-01 TI.30 24 Back-Con Bimetal Thermometer, Dial 3", 24" L/0-250F/-20-120C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

Key Features

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

WD-35661-70 Deluxe Testr Calibration Kit by Oakton

Ideal for plant and field uses.

Each kit contains TDS Singles calibration pouches (two each of 447 µS, 1413 µS, 2764 µS, 15,000 µS, and rinse water); sample jar; and screwdriver all in a hard shell carrying case with room for your TDSTestr (order Testr separately).

TDS Singles are handy, single use pouches that each contain 20 ml of fresh calibration solution. Accuracy is ±1% at 25°C.

• Protective carrying case organizes meter and materials
• Includes everything you need for convenient calibration
• Calibration standards are made with NIST traceable materials

94460-91 Traceable® High-Accuracy Fridge/Freezer Thermometer with Calibration; 2 Bullet™ Probes by Digi-Sense

Easily and accurately monitor temperature in most scientific, industrial, or general-purpose applications. Built-in alarms alert continuously until reset. Unit displays the exact time and date when thermometer alarms are triggered. Program the alarm in 0.1° increments. Thermometers have one-button field calibration and date/time stamp. Meters that accept two probes are ideal for monitoring two unique areas that are near each other. Probe comes with a microcable that permits a door to close on it.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Use standard Bullet probe to measure air and liquid temperatures. Bullet probe sensor measures 3/4"L x 0.187" dia (1.9 x 0.5 cm).

• Get accurate, reliable measurements with included NIST-traceable calibration
• Resolution of 0.01° and accuracy of ±0.6°F (±0.3°C)
• Visual and audible alarms signal continuously until reset
• Both probes and cable are submersible

Includes

Bullet probes with 10-ft (3-m) cable, magnetic strips, Velcro® strips, bench stand, batteries, and NIST-traceable calibration certificate with data.

GHS1293VY Class 6.1 Dangerous Goods Laser Drum Labels (Vinyl), 100/Pkg by GHS Safety

GHS pre-printed drum labels come with your choice of pictogram that meets the UN recommendations on the Transport of Dangerous Goods. These labels make an excellent choice for short production runs or re-labeling of product for transportation. These labels are printed on a Laser Printable Paper or Vinyl stock with a permanent peel and stick adhesive. Use any desktop publishing package to quickly make your own transportation labels. Available in 8.5" x 14" size and packaged in bundles of 100 sheets.

Part Number: H197129LM1

94460-25 Traceable® Radio-Controlled Digital Wall Clock with Calibration by Digi-Sense

Digital Radio Atomic Wall Clock displays month, date, day of the week, and time (hours, minutes, and seconds) in a.m./p.m. or 24-hour time. Also displays ambient temperature and relative humidity. LCD features digits 2-1/4" high for visibility from up to 20 feet away.

Clock is accurate to 1/10,000 of a second and relative humidity has a 1% resolution. Controlling radio signal from NIST in Boulder, Colorado automatically adjusts clock to precise time, daylight savings, leap year, and leap seconds.

Clock features signal indicators including four strength levels; RC synchronize process, weak signal quality, acceptable signal quality, and excellent signal quality.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Increase versitility with alarm and snooze options

Includes

Two AA batteries, wall-mount screw, and NIST-traceable calibration certificate with data.

90550-97 Dampen Back-Con Bimetal Thermometer 5" Dial 4" L Range 0-250F (-20-120C) by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Dampened movement
• More economical than silicone gauges
• Greater temperature range than a silicone-filled gauges
• Anti-parallax dial for accurate readings
• Eliminate the risk of a leaking case and cross-contamination
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments