$75 - $100

08541-03 K30-1-304 Thermocouple Wire Type K 30-Gauge, Glass Braid Insulation, 100-ft Spool by Digi-Sense

Wire comes in 30 gauge size, ideal for fabricating your own probes or extension cables (meets ANSI and ASTM standards). Choose from wire with fluorinated ethylene propylene resin (FEP/FEP) or fiberglass materials as well as in 100-ft or 1000-ft lengths for any application.

TT521TB Tagboard Class 5.2 Organic Peroxides Placard (10.75" x 10.75") by GHS Safety

Placards are displayed on vehicles, tankers, and containers to identify the risk of products being transported. GHS Line of placards are manufactured to meet the UN specifications on the Transport of Dangerous Goods.

These placards are stocked in 3 materials. Paper Tag-board placards are a cost effective single use format. Rigid Plastic placards will withstand multiple uses even in adverse weather conditions.

Outdoor Grade Peel and Stick Vinyl placards offer a permanent marking solution and will withstand outdoor environments.

90551-44 Silicone Filled Back-Con Bimetal Thermometer, 3" Dial, 4" L/50-300F/10-150C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for Acrylic lens thermometers is 200°F (93°C).

• Dampened movement
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with Acrylic lens
• Recalibrate using the external reset screw
• For use in applications that do not exceeding 200F

93800-79 Industrial Direct Insert Spring Loaded RTD Probe with Poly Head, 4" Length by Digi-Sense

Industrial RTDs produce greater accuracy and are broken down into two market segments: industrial and sanitary. Aluminum heads are used in industrial applications, chemical processes, production lines, ovens, furnaces, and vessels. Poly heads are used in sanitary applications within the food, drug and pharmaceutical markets. The probes conductor is made of 24 gauge cooper wire and is encased with FEP insulation, and has a 316 stainless steel sheath. Featuring a standard size protection head with a gasketed cap to seal out dust and moisture and houses a ceramic terminal block. Head has a 3/4" NPT(F) opening on the side for easy connection to electrical conduit.

Spring loaded probes: designed to bottom out when inserted in to a thermowell to produce an accurate reading. (Not designed for direct insertion in to medium)

Non-spring loaded probes: designed to be directly inserted into the medium being measured without the use of a thermowell.

TT300TB Tagboard Class 3 Flammable Liquids Placard (10.75" x 10.75") by GHS Safety

Placards are displayed on vehicles, tankers, and containers to identify the risk of products being transported. GHS Line of placards are manufactured to meet the UN specifications on the Transport of Dangerous Goods.

These placards are stocked in 3 materials. Paper Tag-board placards are a cost effective single use format. Rigid Plastic placards will withstand multiple uses even in adverse weather conditions.

Outdoor Grade Peel and Stick Vinyl placards offer a permanent marking solution and will withstand outdoor environments.

93831-10 Pen RTD Probe, 100 Ohm, ANSI 3-Blade Connector, 2.5" L, 5ft Coil Cord by Digi-Sense

Maximum error for probe assembly is ±1.1°C + 0.12% of reading below 300°F, ±0.35% of reading above 300°F. Alpha coefficient is 0.003850 Ω/Ω/°C (DIN IEC 751). Resistance at ice point (0°C) is 100 Ω.

Note: Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five.

Note: The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Time Constant: 1-3 seconds or greater
• Custom designs or changes to this product are available upon request

93800-80 Industrial Direct Insert Spring Loaded RTD Probe with Poly Head, 6" Length by Digi-Sense

Industrial RTDs produce greater accuracy and are broken down into two market segments: industrial and sanitary. Aluminum heads are used in industrial applications, chemical processes, production lines, ovens, furnaces, and vessels. Poly heads are used in sanitary applications within the food, drug and pharmaceutical markets. The probes conductor is made of 24 gauge cooper wire and is encased with FEP insulation, and has a 316 stainless steel sheath. Featuring a standard size protection head with a gasketed cap to seal out dust and moisture and houses a ceramic terminal block. Head has a 3/4" NPT(F) opening on the side for easy connection to electrical conduit.

Spring loaded probes: designed to bottom out when inserted in to a thermowell to produce an accurate reading. (Not designed for direct insertion in to medium)

Non-spring loaded probes: designed to be directly inserted into the medium being measured without the use of a thermowell.

Part Number: H1016.5PA

Measuring Range: -50 to +250°C

08541-11 K24-1-304 Thermocouple Wire Type K 24-Gauge, Glass Braid Insulation, 100-ft Spool by Digi-Sense

Wire comes in 24-gauge size, ideal for fabricating your own probes or extension cables (meets ANSI and ASTM standards). Choose from wire with polyvinyl chloride (PVC), fluorinated ethylene propylene resin (FEP/FEP), fiberglass, high-temperature fiberglass, or ceramic fiber outer/inner insulation. These cables are also available in 100-ft or 1000-ft lengths for any application.