$75 - $100

H-10-100-12 Ammonia Colorimetric Gas Detection Tube, 10 - 260 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

TK1027-Z Hydrochloric / Muriatic Acid Test Kit, 1 drop = 0.5% by AquaPhoenix

EndPoint ID Drop Count Test Kit, Hydrochloric / Muriatic Acid

1 drop = 0.5% / 1 mL

Build your brand with EndPoint® ID test kits that are private labled with your company logo and contact information. EndPoint ID test kits include color pictures, icons and video to help simplify the testing process. Each kit comes with instructions, reagents, syringe and test vial all packaged in a durable plastic case. Test kit case and reagents can be private labeled with your company logo and contact information.

EndPoint ID Features:

• Color coded caps for easy test parameter identification
• Color pictures to help identify color changes while testing
• Scannable QR codes link to training videos via your smart phone
• Visual icons for testing and safety tips to remind users of best practices
• Interferences are listed for increased accuracy
• Printed on durable synthetic paper that is waterproof, chemical-resistant and tear-resistant
• Private labeled with your company logo and contact information

0590 7501 750-1 Voltage, Continuity, Phase Sequence Tester by Testo

The testo 750 voltage testers are the first instruments to include an all-around viewable LED voltage indication. All three models include low input impedance, phase sequence, continuity test, and meet CAT III 1000 V CAT IV 600 V safety standards.

The testo 750-2 includes a single probe voltage testing, built-in flashlight, and GFCI test function. The 750-2/-3 can perform GFCI Circuit tests on AC outlets. When performing a GFCI circuit test, a 35 mA load is applied to the circuit.

The testo 750 vibrates ensuring that the GFCI circuit test is active. In addition to the above features, the testo 750-3 includes a 3-digit LCD showing the actual voltage measurements.

Testo's history of efficiency, innovation, and quality now extends into the entire electrical lineup. Once again, Testo brings high value, feature-packed products to the HVAC contractor market.

• GFCI Test Function
• Patented all-around viewable LED voltage bar indication
• 0 to 690 V AC/DC voltage measurement
• Polarity detection for VDC measurements
• Phase sequence test for determining motor rotation
• Two handed operation with anti-slip rings for safer voltage measurements
• Built-in flashlight for testing in dark places
• Continuity test with audible and visual indications
• Dust and water protection to IP 64

AQT20 3M Clean-Trace Total ATP Water Plus Pens, 10 pack by AquaPhoenix

The test is designed to rapidly assess equipment sanitation processes and the efficiency of Clean In Place (CIP) procedures by the improved more accurate detection of organic contamination from microbial or product residues. The test gives an objective indication of cleanliness in water samples in seconds.

Designed for use with the 3M™ Clean-Trace™ NG Luminometer, the new AQT200 formulation now provides the ability to gain more consistent and reliable results providing greater confidence in your hygiene monitoring procedures. The new improved formulation also provides the flexibility to store AQT200 at your own convenience - room temperature for up to 2 months or refrigerated for up to 12 months. 10/case.

08132-02 TI.31 4 Bottom-Mount Bimetal Thermometer, 3" Dial, 4" L/25-125F/-5-50C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

Key Features

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

WD-35634-03 Replacement pH Sensor for Tester 30+; DJ by Oakton

Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample. For your convenience, cables, power adapters, and other accessories are available for your Oakton meters and pocket testers.

PROBPH pH Probe by Bluelab

The Bluelab® pH Probe is a replacement pH probe suitable for use with Bluelab® products that use a BNC fitting.

pH probes have a limited lifespan, they age with everyday use. With proper care and use (keeping the probe tip hydrated and cleaning once a month) you can extend the probe life.

The pH probe tip should be stored in KCl solution to minimise the contamination of the gel.

Features

• Easy to clean
• Gel filled (non-refillable)
• Double junction reference
• Waterproof cable joint
• Probe holder included - keeps probe secure
• Quality BNC connection
• 2 meter / 6.5 foot standard cable

90551-42 Sil-Filled Back-Con Bimetal Thermometer, 3" Dial, 2.5" L/50-300F/10-150C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for Acrylic lens thermometers is 200°F (93°C).

• Dampened movement
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with Acrylic lens
• Recalibrate using the external reset screw
• For use in applications that do not exceeding 200F

Part Number: H197150VM2

18520-57 Type J Thermocouple Probe Quick Dis-connector, Dual with Std-Connector, 12" L, .125 Dia, Exposed Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with 316 stainless steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

90446-55 Probe Type-J 12" L Hi-Temperature Fiberglass/Ct by Digi-Sense

Magnesium Oxide insulated thermocouples, commonly referred to as MgO thermocouples, are used in many process and laboratory applications. Many desirable characteristics make them an excellent choice for general and special purpose applications. They are available in all thermocouple element types, single or dual elements, a wide variety of sheath diameters / materials, rugged in nature, bendable, and have fairly high temperature ratings.

• 316 stainless steel sheath