$75 - $100

0516 1201 Carrying Case Compact Class by Testo

Service case for measuring instrument and probes, suitable for measuring instruments testo 416 / testo 425 / testo 512 / testo 110 / testo 112 / testo 720 / testo 922 / testo 925 / testo 926

Dimensions: 454 x 316 x 111 mm

*Please note we can only ship RKI products to customers within the United States

2610810 Bacteria Tests: Hach Paddle Test TAB/Y&M 10 pk by AquaPhoenix

Hach Paddle Testers allow fast, easy screening of water samples, solid surfaces, and nonviscous liquids where unsanitary conditions may exist. The paddle is a double-sided slide attached to the vial cap. Each side of the slide is used to perform a separate test. The slide has a molded-in grid for easy colony counting without opening the optically clear, leakproof vial. Paddle Tester, Total Aerobic Bacteria/Yeast and Mold (Tryptone Glucose Extract Agar/Sabouraud Dextrose Agar), pk/10.

• Save time and simplify lab and field testing with Hach prepared P/A media
• Report Total Coliform values with EPA accepted Presence-Absence bottles and media
• Simplify routine testing with self-contained, easy-to-use Paddle Testers and BART™ products

18526-67 Economic Cryogenic Probe, 100 Ohm, 12" L, 3 Blade with Mini-Connector, .188 Dia 5ft FEP by Digi-Sense

Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five.

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Temperature ranges from -321°F - +300°F (-196°C to - +150°C)
• Time Constant: 3 seconds or greater
• Maximum error for probe assembly is ±1.1°C + 0.35% of reading below 300°F,. Alpha coefficient is 0.003850 U/U/°C (DIN IEC 751). Resistance at ice point (0°C) is 100 omega.
• Custom designs or changes to this product are available upon request

DURA-LITE-12V- LED25SP 25W 12v AC / DC Par 38 LED Cool White, 25 Degrees Wet Location Gasket by Western Technology

Order your replacement PAR38 LED lamps (light bulbs) here! These Par38-25W LED light bulbs were specifically created for use with our SITE LIGHT™ Series. The optics give it narrower 25° beam angle giving it more of a spotlight projection. As a 12-24V AC/DC this custom bulb was built to work with the Battery Clamp plug option of the 4100LED & 4210LED. These 25W LED bulbs produce cool bright white light measured at ~2000 Lumens.

• 12-24V AC/DC: Cool White (Spot) 25° Beam Angle

*Please note we can only ship RKI products to customers within the United States

TK7500-Z Peracetic Acid Test Kit, 1 drop = 5 or 15 ppm by AquaPhoenix

Our Peracetic Test Kit is used to verify the concentration levels of Peracetic Acid used in the Cleaning and Sanitation Industry. It is used to test Peracetic Acid levels in Sanitizer Applications, Wash Water Applications and Waste Water applications. Concentration levels are represented in ppm.

18525-17 Type J Spring Loaded Ind Thermocouple Probe Probe 12" L, 12" Ext .250 Dia, Grn Jct by Digi-Sense

These probes cannot be inserted directly into a medium. Spring loaded industrials are not sealed where the threads meet the probe. They must be inserted into a thermowell or other sealed vessel.

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• The probes can be installed with current housing without having to purchase a whole new industrial assembly
• Response Time: 3.75 seconds or greater
• Each probe comes with ½" NPT insertion threads
• Probes are spring loaded which allows the probe to be bottomed out into a thermowell
• Probes are welded and sealed which allows for direct insertion into a vessel
• Custom designs or changes to this product are available upon request
• Each probe comes with a color coded ANSI stripped leads: type J-red/white, type K-red/yellow, type T-red/blue

*Please note we can only ship RKI products to customers within the United States

Part Number: 400-4105-010

WD-17090-00 InnoCal NIST-Traceable Calibration, Multimeter, Handheld, 45-digit by Oakton

All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's) and test uncertainty ratios (TUR's) at no additional cost!

NIST-traceable calibration allows you to confirm that the specific asset you purchase does in fact meet the manufacturer's published specification. Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays. EPA, USDA, ISO and GLP/GMP standards require regular NIST-Traceable calibration of all test equipment being used in critical applications.

Calibrations on 4.5 digit handheld multimeters are performed using high-accuracy multi-function calibrators and standards-grade reference multimeters per manufacturer's recommended procedures. Measurements can be taken up to 40,000 Volts, 1000 Amps, 10 Tera-Ohms, 110 Mega-Farads, and 1.1 Giga-Hertz.

Key Features

• Provides traceability to NIST
• Lists the environmental conditions present at time of calibration
• Certificate lists actual values, uncertainties, and tolerances
• Regular calibration helps you meet ISO, EPA, GLPs/GMPs and other quality standards
• Not an accredited certificate
• Calibration service for a handheld multimeter, 4.5-digit

Includes

Calibration reports issued by InnoCal may not be reproduced, except in full, without written permission of InnoCal. The results stated in our reports relate only to the items tested or calibrated.