$75 - $100

*Please note we can only ship RKI products to customers within the United States

SCT-108.001.16 SCT-PH-PEN-3 Waterproof Handheld pH/mV/Temp Meter by ScichemTech

Includes:

• Handheld pH/mV/Temp Meter
• Standard Solution
• Storage Solution (pH4 & pH7)
• Lanyard Connection
• Battery
• Instruction Manual

Features:

• Reliable SCT Tester for pH, ORP and Temperature measurements.
• Microprocessor based for fast and accurate measurements.
• Special viewing angle designed of waterproof housing IP 57 rated. It floats on water.
• Large LCD display pH, ORP and Temperature simultaneously.
• Easy to calibrate by one keyboard and Automatic Temperature Compensation (ATC), Manual Salinity(MSC) and Altitude(MAC) Compensation.
• Multi-functions with Data-hold, Max/Min and shows PTS after calibration. Degree °C/°F are switchable.
• Auto power shut off after 10 minutes of non use.
• Easy to replace electrode module and the type of electrode would be recognized automatically and shown in display during insertion.
• Battery operated. Low battery and consumption indicator.

MGridSet Measurement Grid with Holder by Zarbeco

This Metric Grid has a 10 x 10 Matrix of .7mm x .7mm Squares. One square is further divided into a 10 x 10 Matrix of .07mm Squares. The Grid Line Widths are .001"± .0001" (.025mm±.0025mm).

The Pattern can be in direct contact with the object to be measured. The MGrid can be used to calibrate your MiScope or digital microscope. The holder can be used to raise your MiScope to be even with the MGrid when calibration of a flat object (like paper).

The Reticle Pattern is very durable, double layer, deposited evaporative Chrome/Chrome Oxide, for a reflectivity of less than 5% looking at the pattern. The Patterns on all Reticles manufactured are replicated from Precision Chrome on Glass Tooling under clean room conditions.

Features

• Accurate reference pattern for precise calibration

H-10-103-10 Hydrogen Sulfide Colorimetric Gas Detection Tube, 2.5 - 60 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

18520-55 Type J Thermocouple Inconel Probe Quick DisConnector, Dual with Std-Connector, 12" L, .125 Dia, Ungrounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with ICONEL 600 sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

Old Part Number: HP107530
New Part Number: H197830LA

18520-65 Type J Thermocouple Probe Quick Dis-connector, Dual with Std-Connector, 18" L, .125 Dia, Ungrounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with 316 stainless steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

SCT-108.002.B1 ORP Combination Electrode by ScichemTech

• Plastic ORP Combination Electrode
• suited for regular ORP measurement
• 8 PIN connector

Package Includes: 6 Clips, 3 lead sets (hot & ground), ground lead and hold bar

18525-19 Type K Spring Loaded Ind Thermocouple Probe Probe 12" L, 12" Ext .250 Dia, Grn Jct by Digi-Sense

These probes cannot be inserted directly into a medium. Spring loaded industrials are not sealed where the threads meet the probe. They must be inserted into a thermowell or other sealed vessel.

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• The probes can be installed with current housing without having to purchase a whole new industrial assembly
• Response Time: 3.75 seconds or greater
• Each probe comes with ½" NPT insertion threads
• Probes are spring loaded which allows the probe to be bottomed out into a thermowell
• Probes are welded and sealed which allows for direct insertion into a vessel
• Custom designs or changes to this product are available upon request
• Each probe comes with a color coded ANSI stripped leads: type J-red/white, type K-red/yellow, type T-red/blue

TK3058-Z Hardness (Trace) Test Kit, 1 drop = 0.5 ppm as CaCO3 by AquaPhoenix

EndPoint ID Drop Count Test Kit, Trace Hardness

1 drop = 0.5 ppm as CaCO3 / 25 mL

Build your brand with EndPoint® ID test kits that are private labled with your company logo and contact information. EndPoint ID test kits include color pictures, icons and video to help simplify the testing process. Each kit comes with instructions, reagents, and test vial all packaged in a durable plastic case. Test kit case and reagents can be private labeled with your company logo and contact information.

EndPoint ID Features:

• Color coded caps for easy test parameter identification
• Color pictures to help identify color changes while testing
• Scannable QR codes link to training videos via your smart phone
• Visual icons for testing and safety tips to remind users of best practices
• Interferences are listed for increased accuracy
• Printed on durable synthetic paper that is waterproof, chemical-resistant and tear-resistant
• Private labeled with your company logo and contact information

18520-82 Type T Thermocouple Probe Quick DisConnector, Dual with Std-Connector, 6" L, .188 Dia, Exposed Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with 316 stainless steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

SCT-108.003.F3 Reference electrode by ScichemTech

• Reference electrode
• The first and second salt bridge solution can be chosen
• For all measurement occasions
• Banana plugs

Part Number: H196270VN

90533-02 Back-Con Bimetal Thermometer, Dial 5", 9" L; Range; 25-125F/-5-50C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

*Please note we can only ship RKI products to customers within the United States