$5 - $10

18527-96 Compression Fitting; Probe Diameter 1/8"; Brass; 1/8" NPT (M) by Digi-Sense

Use fittings for straight-shaft probes and metal tubing only. Tighten compression nut to secure and completely seal probe. Replacement ferrules let you reuse a compression fitting when replacing a worn-out probe. Simply disassemble fitting, discard probe and old ferrule, install replacement ferrule over probe sheath, and retighten fitting. Connectors come in both 316 Stainless Steel and Brass.

• Available in both 316 Stainless Steel and Brass

GHS1269 Corrosion Pictogram Placard (10.75" x 10.75") by GHS Safety

These large format HazCom GHS Pictograms are 10.75" x 10.75" (273 mm x 273 mm) and perfect for marking your containment vessels or tanks. Printed on outdoor grade peel and stick vinyl with durable fade resistant inks, these pictograms are made to withstand the elements.

They come with a back split liner for easy application and are sold individually or in packages of 100.

08080-72 Stainless Steel Bimetal Pocket Thermometer, 1" Dial, Poly Lens, 8" Stem, -40-50C, 1C Div by Digi-Sense

• Factory tested to three points with a ±1% accuracy
• Minimum immersion: liquids 2" (50 mm), gases 4" (100 mm)
• Hermetically sealed dial stops internal fogging
• Recalibrate using external adjustment nut
• 304 Stainless Steel dial case and stem
• Shock resistant

Includes

All thermometers come with a statement of test, and a plastic storage sleeve with pocket clip

08080-74 Stainless Steel Bimetal Pocket Thermometer, 1" Dial, Poly Lens, 8" Stem, 0-150C, 1C Div by Digi-Sense

• Factory tested to three points with a ±1% accuracy
• Minimum immersion: liquids 2" (50 mm), gases 4" (100 mm)
• Hermetically sealed dial stops internal fogging
• Recalibrate using external adjustment nut
• 304 Stainless Steel dial case and stem
• Shock resistant

Includes

All thermometers come with a statement of test, and a plastic storage sleeve with pocket clip

GHS1268 Exploding Bomb Pictogram Placard (10.75" x 10.75") by GHS Safety

These large format HazCom GHS Pictograms are 10.75" x 10.75" (273 mm x 273 mm) and perfect for marking your containment vessels or tanks. Printed on outdoor grade peel and stick vinyl with durable fade resistant inks, these pictograms are made to withstand the elements.

They come with a back split liner for easy application and are sold individually or in packages of 100.

DIN-K DIN Rail Bracket Kit by Agrowtek

DIN rail mounting brackets mount Agrowtek's PHX & SXH hydroponics sensors, HX8 device hubs, and LX series interface modules on DIN rail.

Rugged brackets are made in Germany and easily click on and off of DIN rail. Kit includes two brackets and two thread-forming screws for plastic sized for mounting Agrowtek's products to the brackets.

• Rugged Construction
• Commercial & Industrial Applications
• Easy to Install; screws included.

08008-04 Pocket Liquid-In-Glass Thermometer; -30 to 120F, Closed Plastic Case, Organic Liquid Fill by Digi-Sense

These thermometers are ideal for use in laboratory, biology, chemistry, university, photographic, food/beverage, petrochemical, automotive, wastewater and many other general purpose applications. The protective plastic case protects these thermometers from accidental breakage during use and storage. The section of the case that surrounds the bulb has small openings for circulation. All DURAC Plus® thermometers feature markings that are permanently printed on the glass, blue spirit liquid that has a dark scale contrasts against a white background.

• Non-mercury blue spirit liquid

Includes

Rugged plastic case with an eyelet at the top for easy suspension

58-060-1M RG58/U, BNC Male to BNC Male, 60 inch by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

Package Includes: Nano-Clip only

08080-75 Stainless Steel Bimetal Pocket Thermometer, 1" Dial, Poly Lens, 8" Stem, 0-250C, 1C Div by Digi-Sense

• Factory tested to three points with a ±1% accuracy
• Minimum immersion: liquids 2" (50 mm), gases 4" (100 mm)
• Hermetically sealed dial stops internal fogging
• Recalibrate using external adjustment nut
• 304 Stainless Steel dial case and stem
• Shock resistant

Includes

All thermometers come with a statement of test, and a plastic storage sleeve with pocket clip

08080-76 Stainless Steel Bimetal Pocket Thermometer, 1" Dial, Poly Lens, 8" Stem, -40-160F, 2F Div by Digi-Sense

• Factory tested to three points with a ±1% accuracy
• Minimum immersion: liquids 2" (50 mm), gases 4" (100 mm)
• Hermetically sealed dial stops internal fogging
• Recalibrate using external adjustment nut
• 304 Stainless Steel dial case and stem
• Shock resistant

Includes

All thermometers come with a statement of test, and a plastic storage sleeve with pocket clip