$25 - $50

*Please note we can only ship RKI products to customers within the United States

10-100-15 Ammonia Colorimetric Gas Detection Tube, 25 - 500 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

18526-91 Miniature Type-J Thermocouple Male Connector, 2 Pin by Digi-Sense

• Glass-filled nylon construction with hollow pins and molded barriers prevent short circuit
• Secure thermocouple wire into positive/negative terminals with screws
• Each connector comes in ANSI color coded material: type J-black, type K-yellow, and type T-blue
• Miniature connectors are suited for small wires and mineral insulated cables

100 EZ One Button Operation DMM by Test Products International

The new TPI 100 automatically switches between AC and DC Voltage as well as resistance measurements. No more guessing what range to switch your meter to. The TPI 100 does it automatically.

Features:

• Automatically switches between ACV, DCV, and ohms (resistance). Benefit: Simple to use. Meter selects function and range, just connect the leads to the device under test.
• Single button operation. Benefit: Easy to use. Enables users with limited knowledge to perform tests safely.
• 0 to 600 volts AC and DC Benefit: Enough range to safely perform measurements
• 10 MΩ internal impedance. Benefit: High impedance prevents inaccurate reading caused by circuit loading.
• Auto power off. Benefit: Increases battery life by turning off the multimeter when not in use.
• 4,000 count display
• Up to 40MΩ
• cULus 61010-1
• CAT II - 1000V, CAT III - 600V
• Includes Test Lead Set, Batteries and Protective Rubber Boot
• 3 Year Limited Warranty

Applications:

• Measure line and control circuit voltages
• Measure resistance of motor windings, transformers, and solenoids
• Make general AC and DC voltage and resistance measurements
• Measure the resistance of elements and electric heater cores
• Test continuity of wiring
• Verify voltage at breakers and outlets
• Use as a back-up meter in your tool box

The 100 comes complete with the following accessories:

• 100 Instrument
• Rubber Boot
• Test Lead Set
• 1.5V Battery
• Instruction Manual

Provides power from 12/24V vehicle outlet sockets. Use with CH0106.

18527-11 Thermocouple Connector, Standard, Type-T, Female Jack; 1/ea by Digi-Sense

• Glass-filled nylon construction with molded barriers to prevent short circuit
• Secure thermocouple wire into positive/negative terminals with screws
• Each connector comes in ANSI color coded material: type J-black, type K-yellow, and type T-blue

*Please note we can only ship RKI products to customers within the United States

18523-58 Type T Thermocouple Quick Dis-connector, with Mini-Connector, 6" L, .062 Dia. Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for measuring liquids, gases, or semi solids
• Designed with 316 Stanless Steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request.

09035-25 Irreversible 5 to Point Vertical Temperature Label, 480 to 554°F / 249 to 290°C; 10/Pk by Digi-Sense

Labels are made up of a series of temperature-sensitive elements sealed between heat-resistant substrates with transparent windows. Each element changes color distinctly as its rated temperature is met or exceeded. The changes to the label are irreversible, providing a temperature history of the surface being monitored. The labels will not delaminate when removed, allowing them to be attached to an inspection report to serve as a permanent record. Ideal for use in the food, automotive, molding and metal working industries. Accuracy is ±1.8°F below 212°F and ±1°F above 212°F. Shelf life: 1 year after date of purchase.

• Used as a quick inspection tool that the product is in usable condition during the shipping and receiving process
• Save time and money due to costly recalls
• Self-adhesive design

18527-00 Thermocouple Connector, Mini, Type-T, Female Jack; 5/pk by Digi-Sense

• Glass-filled nylon construction with molded barriers to prevent short circuit
• Secure thermocouple wire into positive/negative terminals with screws
• Each connector comes in ANSI color coded material: type J-black, type K-yellow, and type T-blue

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

94222 EclipSmart Solar Filter for 127mm/130mm Newtonian by Celestron

Get ready for the 2017 total solar eclipse with EclipSmart Solar Safe Products.

Enhance your viewing experience with Celestron's EclipSmart Solar Filter for the 127 mm & 130 mm Telescopes. With two Velcro straps and four self-adhesive Velcro pads for safely securing your solar filter in place, you can be assured that the solar filter will not fall off and will provide Solar Safe, ISO compliant viewing.

• Instantly transform your normal PowerSeeker 127, Astro Fi 130, NexStar SLT 130, Omni XLT 130AZ, and SkyProdigy 130 Newtonian telescope into a yellow-light solar telescope
• This filter is not designed for use on the AstroMaster 130 telescopes
• Solar film produced in the USA by American Paper Optics, one of the suppliers recommended by NASA for safe solar viewing
• Designed from the telescope s lens cap for a snug fit, each filter includes two safety Velcro straps and four self-adhesive Velcro pads for safely securing your solar filter in place

Solar Safe Technology

EclipSmart solar products feature Solar Safe filter technology providing the ultimate protection from harmful solar radiation, including both IR and UV light, and filters 99.999% of intense visible light. Celestron Solar Safe filter technology is GUARANTEED SAFE for direct solar observation and has been independently tested by SAI Global Assurance Services.

Solar Safe products conform to and meet the transmission requirements of ISO 12312-2, Filters for Direct Observation of the Sun, EN 1836:2005 + A1:2007 (E) for an E15 Filter for the Direct Observation of the Sun and, AS/NZS 1338.1:2012, Filters for Eye Protectors.

09035-22 Irreversible 5 to Point Vertical Temperature Label, 320 to 360°F/160 to 182°C; 10/Pk by Digi-Sense

Labels are made up of a series of temperature-sensitive elements sealed between heat-resistant substrates with transparent windows. Each element changes color distinctly as its rated temperature is met or exceeded. The changes to the label are irreversible, providing a temperature history of the surface being monitored. The labels will not delaminate when removed, allowing them to be attached to an inspection report to serve as a permanent record. Ideal for use in the food, automotive, molding and metal working industries. Accuracy is ±1.8°F below 212°F and ±1°F above 212°F. Shelf life: 1 year after date of purchase.

• Used as a quick inspection tool that the product is in usable condition during the shipping and receiving process
• Save time and money due to costly recalls
• Self-adhesive design