$25 - $50

1429900 Deminerilzer Bottle, 177mL by AquaPhoenix

Narrow mouth, polyethylene bottle. Contains monobed resin. Flip spout. Great way to deionize small volumes of water. Used with Hach Portable Laboratories.

*Please note we can only ship RKI products to customers within the United States

TDSK100 Conductivity Solution, 100uS KCl, 1Qt. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

*Please note we can only ship RKI products to customers within the United States

94018 Dew Shield DX for C6 & C8 by Celestron

The Celestron Dew Shield DX is an essential accessory that protects your optical tube in the field. It prevents excess moisture in the air from forming condensation on the corrector lens. A dew shield also helps block stray light from entering the telescope for better viewing and astroimaging. Use the Dew Shield DX on your 6" and 8" Schmidt Cassegrain, EdgeHD, and RASA (with single dovetail) optical tubes with confidence.

Construction

The Dew Shield DX provides a perfect, custom fit designed specifically for 6" and 8" Celestron optical tubes. The Dew Shield is built from durable PE plastic that is flexible but strong. Extra padding has been added at the tube attachment edge to create a stronger fit on the optical tube. The felt-lined interior absorbs any additional stray light and excessive moisture, creating optimal contrast when viewing and imaging. The large dovetail cutout has been made both wider- to accommodate a 4" wide dovetail rails, as well as deeper, to create a more solid connection with the optical tube.

Attaching the Dew Shield to your optical tube is easy thanks to the Velcro attachment points. Whether your optical tube is 6" or 8", simply adjust the Velcro for the correct fit.

Transportation and Storage

To save space when not in use, roll up your Dew Shield DX for easy transport and storage.

• Prevents dew from forming on your Schmidt-Cassegrain or EdgeHD corrector lens
• Fits 6" and 8" optical tubes
• Cutout accommodates telescope dovetail rails
• Felt-lined interior surface captures moisture and reduces stray light
• Rolls up for easy transport

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

Part Number: SR-DUMM-1S

TDS70 Conductivity Solution, 70ppm/105uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

*Please note we can only ship RKI products to customers within the United States

10-137-30 Butane Colorimetric Gas Detection Tube, 25 - 1,400 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

TK3120-Z WQA Hardness Test Kit by AquaPhoenix

1 drop = 1 gpg as CaCO3 / 15 mL

EndPoint ID test kits are packaged in a durable plastic case and include all reagents, equipment and instruction card to complete approximately 60-75 tests. Color coded reagent caps match the color bar on the instruction card for easy identification when running multiple tests and our photographic, step-by-step instructions keep testing simple and help users easily identify color changes.