$25 - $50

*Please note we can only ship RKI products to customers within the United States

TDSK7000 Conductivity Solution, 3740ppm/7000uS,1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

10-143-10 Diesel & Jet Fuel Colorimetric Gas Detection Tube, 0.5 - 25 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

PBX-105 5-Port Chemical Injection Manifold by Agrowtek

PBX-104 is a simple multi-port manifold for connecting Agrow-Dose peristaltic dosing pumps into a recirculating sample loop for injecting chemicals such as nutrients or pH buffers.

The PBX-100 series injection manifolds are often combined with a PBX-210, PBX-310, or PBX-410 sensor probe manifold for sampling of the solution prior to the injection point.

*Please note we can only ship RKI products to customers within the United States

10-135-04 Butadiene Colorimetric Gas Detection Tube, 0.5 - 5 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

TH310 Stick Thermometer with stainless steel probe and Calibration Check feature by Milwaukee

Thousands of people have relied on the Milwaukee TH310 compact Digital Temperature Meter to read temperature in all types of applications. The durable, digital readout is fast and accuracte and best of all is environmentally friendly with NO mercury, NO glass. From fish tanks to breweries, wineries and labs the TH310 Stainless Steel Stick probe is your quick temperature meter.

SUMMARY

The Milwaukee TH310 compact digital thermometer is specifically designed to help professionals and home owners regulate their home brew, wine process, classroom experminents or labs duties. Keeping the proper temperature improves results of beer and wine output. It also helps in understanding the quality of lab data. Keep temperature in your target range for better results.

WHAT PEOPLE ARE SAYING

"Accurate results and calibrated right out of the box."
"Must have for any aquarium owner."
"Good value. Easy to use. Consistent."
"No dangerous chemicals"
"Used it in the field for checking the fruit to harvest, was great"

DESIGN FEATURES

• Fast, accurate results with large digital LCD readout.
• Extended temperature range: -50 to 150°C (-58 to 302°F).
• Cal-Check feature.
• Fast NTC sensor response.
• Easy measurement: just place the stainless steel probe in the sample and wait for the reading to stabilize.
• Easy sharp Stainless Steel temperature shaft for quick penetration.
• Stainless Steel probe for easy cleaning.
• Long battery life, approx. 3000 hours of continuous use (batteries included).
• High accurate digital readings.

Clean and Safety

Here are our top four tips.
1. Always clean you stainless steel probe after use.
2. Pay close attention to the direction of the probe's sharp tip.
3. If the LCD begins to fade, change your batteries.
4. To avoid electrical shock avoid contact with surfaces of 24 VAC or 60 VDC.

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

AI1131-L 12.88 mS/cm Conductivity Calibration Solution 16 oz. by Apera

The Apera Instruments 12.88 mS/cm Standard Conductivity Calibration Solution is made of high-purity chemicals, standardized against NIST certified references at 25°C (77°F). It's ideal for the calibration of all types of conductivity meters. Since conductivity value is affected by temperature, the temperature & conductivity reference table is provided on the bottle labels for your reference.

All the solutions are double-sealed, not subject to the DOT shipping restrictions, and have a 1-year shelf life. The expiration date is printed on the bottle.

MSDS is downloadable at support.aperainst.com; The Certificate of Analysis can be acquired by requests.

Note: Store at room temperature and away from direct sunlight. Keep the bottle tightly closed when not in use. Keep out of reach of children.

• Standardized against NIST certified references at 25°C (77°F), ideal for the calibration of all types of conductivity meters
• Double-sealed, 1-Year shelf life
• The expiration date and Temperature/pH reference table is provided for reference
• Non-hazardous product (MSDS is downloadable)

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

98766-06 Traceable Large-Digit Stopwatch/Chronograph with Calibration; ±0.001% Accuracy by Digi-Sense

These stopwatch/timer/chronographs feature extra-tough construction and time-of-day alarm - ideal for industrial and plant use.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Shock-resistant ABS plastic case for rugged durability
• Features AM/PM, date, day, alarm, and clock functions
• Use as a timer or use to display time of day in hours, minutes, and seconds

Includes

One 1.5 V button cell, lanyard, and NIST-traceable calibration certificate with data.

Condenser Filter

Part Number: CP-AF-K1

TT23V Class 2.3 TDG Label (Vinyl) by GHS Safety

Shipping Labels are essential for packages that contain dangerous goods. GHS labels are available in two materials. Paper for indoor applications and in vinyl for extended outdoor usage using a fade resistant ink. These labels meet the UN Recommendations on the Transport of Dangerous Goods.

Available in 500/roll formats.