$200 - $300

93831-73 Bendable RTD Probe, 100 Ohm, ANSI 3-Blade Connector, 10" L, 5ft Coil Cord by Digi-Sense

Maximum error for probe assembly is ±1.1°C + 0.12% of reading below 300°F, ±0.35% of reading above 300°F. Alpha coefficient is 0.003850 Ω/Ω/°C (DIN IEC 751). Resistance at ice point (0°C) is 100 Ω.

Note: Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five.

Note: The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Time Constant: 1-3 seconds or greater
• Custom designs or changes to this product are available upon request

Part Number: M107220.9VN

Part Number: M1072100PN

WD-27003-00 Self-cleaning pH Electrode, CPVC Housing, 10-ft Cable, BNC by Oakton

No more solid buildups

• Flat surface prevents buildups, while fluid flow cleans surface for longer life
• Use with most meters and controllers - BNC connector and ATC element work with a variety of units
• Double junction for difficult applications

MA815D/1 4-Ring EC/TDS/NaCl/Temp Probe - with 1 Meter Cable and Din Connector For MW306 Max Portable Meter Only by Milwaukee

The MA815D/1 Conductivity (EC)/ Total Dissolved Solids (TDS) / NaCl / Temperature probe is designed for use with the Milwaukee MW306 MAX Conductivity/TDS/NaCl/Temp Meter. This probe features a DIN connector and 3' (1 m) cable.

*Please note we can only ship RKI products to customers within the United States

S273CDTC Comb pH Electrode with Hemi-pH Glass by Sensorex

This series of electrodes is designed to provide an economical multi-purpose solution for in-line or submersion pH measurements. Based on our proven S200C bulb and S350CD flat surface pH glass technology, these rugged and durable electrodes are available in Ryton nipples with 1/2" or 3/4" NPT threads; or in our durable epoxy body with or without quick disconnect top caps. Choose from single or double junction designs, flat or recessed measuring surface configurations and cable lengths and connectors as required.

• Economical design for in-line or submersion use
• Choose from single or double junction models
• Threaded 1/2" or 3/4" NPT connections
• Choose from spherical or flat pH measuring surfaces
• Special models for low ionic and other specialty applications available

Part Number: J404A500PN

Part Number: M126550LM10

S660CDHF pH Sensor, Flat, CPVC, HF, Inline by Sensorex

This specification sheet serves as an addendum to other flat-surface, self-cleaning electrode specifications (submersion, by-pass, in-line and insertion) for use in hydrofluoric acid.

Specifications differences for use in hydrofluoric acid (HF) are shown in SPECIFICATIONS section on the back side of this data sheet. Please note 2 major differences as compared to standard electrodes. First, pH range is 0-12 not 0-14. Second, the temperature range is 0-50 deg C.

This series of sensors are fully compatible with all existing appropriate Sensorex mounting hardware. Calibration of these sensors is as normal with any standard pH electrode using standard pH buffer solutions.

• Resists attack and etching from HF
• Resists coating and fouling
• Installs in seconds with no tools
• CPVC, PVDF (S600)or PPS (S8000) versions available
• Connects to existing Sensorex flat surface mounting hardware

08009-14 ASTM Like Liquid-In-Glass Thermometer; 15F / Low Softening Point, Total Immersion, 32 to 180F, Organic Liquid Fill by Digi-Sense

These thermometers are precision manufactured to conform to ASTM E-1 specifications except for not being mercury filled. Designed for use in quality control laboratories or when mercury filled thermometers can not be used but where ASTM standards are still needed. ASTM established thermometer standards suited for special applications, and assigned an ASTM number according to each specification.

Thermometers feature permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered.

• Designed for specific ASTM (American Society for Testing and Materials) test methods
• Nonmercury blue spirit liquid

Part Number: M126525LM17

Old Part Number: 123100N
New Part Number: JR123100PN