$200 - $300

S200C/BNC pH Sensor, 12mm, Polymer, 1M, BNC by Sensorex

The Sensorex S200C is one of our most popular laboratory pH electrodes, due to its reliability and low maintenance design. The pH1600 replaces the S200C/BNC pH probe and has the same design, but features a new Ultem® body for superior chemical compatibility. This pH probe performs to the same specifications compared to the Sensorex S200C and is instantly ready for use as a direct fit replacement.

• New Sensorex S200C
• Durable and chemically compatible Ultem® or body
• Reliable and accurate over the full range of pH measurements
• No refilling or maintenance required with sealed gel-filled design
• Instantly ready for use, and has one year guaranteed shelf life
• One year limited warranty

93820-41 Industrial RTD Probe 6" Length, 1/2" Thread by Digi-Sense

Industrial RTDs assemblies produce greater accuracy are ideal for use in industrial applications, chemical processes, production lines, ovens, furnaces and vessels. The probes conductor is made of 24 gauge cooper wire and is encased with FEP insulation, and has a 316 stainless steel sheath. Featuring a standard size protection head with a gasketed cap to seal out dust and moisture and houses a ceramic terminal block. Head has a 3/4" NPT (F) opening on the side for easy connection to electrical conduit. 316 stainless steel thermowells are included in assemble and are ideal for applications where removing of the probe without draining the vessel is necessary.

Panel Fan Pole Tee Mount 5-1/2" Collar with Hardware

90447-21 RTD Probe 1/8" OD 12" Lengt Stripped Leads by Digi-Sense

Resistance Temperature Detectors, or RTDs, are used in many process and laboratory applications where accuracy and repeatability are of prime importance. RTD elements are available in many different materials and with different temperature coefficients. The most commonly used element is a wire-wound platinum element, conforming to the DIN standard and with a .00385 temperature coefficient.

Key Features

• All probes are low range
• 316 stainless steel sheath material
• Extension leadwire transition with relief spring (350,°F)
• 3-wire RTD, 100 Ω
• Accuracy ±0.1%
• -328 to 400°F (-200 to 204°C)
• .00385°C temperature coefficient
• Constructed using PTFE Insulated silver plated copper internal leads

90447-05 RTD Probe 1/8" OD 5" Length Miniature Plug by Digi-Sense

Resistance Temperature Detectors, or RTDs, are used in many process and laboratory applications where accuracy and repeatability are of prime importance. RTD elements are available in many different materials and with different temperature coefficients. The most commonly used element is a wire-wound platinum element, conforming to the DIN standard and with a .00385 temperature coefficient.

Key Features

• All probes are low range
• 316 stainless steel sheath material
• Extension leadwire transition with relief spring (350,°F)
• 3-wire RTD, 100 Ω
• Accuracy ±0.1%
• -328 to 400°F (-200 to 204°C)
• .00385°C temperature coefficient
• Constructed using PTFE Insulated silver plated copper internal leads

CS150TC-K=1/CM1000 CS150 Light Duty Online Conductivity Sensor, Graphite, 10k, NTC, 1M, Wired for CM1000 by Sensorex

The CS150 and CS150TC conductivity probes are a cost effective solution for measuring conductivity in light industrial and laboratory applications.

Sensors feature measuring surfaces. The durable epoxy body construction provides a rugged and dependable sensor for portable and laboratory use. Suitable for use with most portable conductivity meters.

By adding a simple mounting gland fitting, customers may use these in process applications. Mount them in-line, in a pipe "T" fitting, or submerse them into a tank.

Features:

• Ideal for laboratory and light duty process applicationsAvailable with or without ATC (temperature sensor)
• Easy to submerge in a tank or mount inline in a pipe
• Cell constant choices of 0.1 or 1.0
• Compatible with most portable and benchtop meters

MRS100-TOT MRS Series Industrial Multi Jet Meter, 1", Totalizing Only by Quantrol

Carlon MRS® industrial electric contacting multi-jet meters are an economical answer for industrial applications needing good tolerance to contaminants, an electrical output signal and total volume registration.

With an easy to read register display, the MRS® water meter is designed with reliability and affordability in mind. Used in conjunction with any of Carlon's timers and controls; you can create a customized system specific to your application requirements. The MRS® meter is available in sizes from 3/4" to 2". Carlon's MRS® Industrial meters meet or exceed AWWA specifications.

Tripod Pedestal for up to 30" Fans with Quick Connect Adaptor

93831-98 RTD Probe, 100 Ohm, ANSI 3-Blade Connector, 12" L, 3ft SS Braid Cable by Digi-Sense

Maximum error for probe assembly is ±1.1°C + 0.12% of reading below 300°F, ±0.35% of reading above 300°F. Alpha coefficient is 0.003850 Ω/Ω/°C (DIN IEC 751). Resistance at ice point (0°C) is 100 Ω.

Note: Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five.

Note: The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Time Constant: 1-3 seconds or greater
• Custom designs or changes to this product are available upon request

*Please note we can only ship RKI products to customers within the United States