$200 - $300

Part Number: X1294100PA

93820-43 Industrial RTD Probe 12" Length, 1/2" Thread by Digi-Sense

Industrial RTDs assemblies produce greater accuracy are ideal for use in industrial applications, chemical processes, production lines, ovens, furnaces and vessels. The probes conductor is made of 24 gauge cooper wire and is encased with FEP insulation, and has a 316 stainless steel sheath. Featuring a standard size protection head with a gasketed cap to seal out dust and moisture and houses a ceramic terminal block. Head has a 3/4" NPT (F) opening on the side for easy connection to electrical conduit. 316 stainless steel thermowells are included in assemble and are ideal for applications where removing of the probe without draining the vessel is necessary.

MA888BOX Digital Refractometer for Ethylene Glucol by Milwaukee

Thousands of cooling tower and recycle professionals from boiling towers to antifreeze recycling move to the digital MA888 Digital Ethylene Glycol meter for measurement of the refractive index to determine the % volume and freezing point of ethylene glycol based coolants or antifreeze, from less precise optical refractometers.

WHAT PEOPLE ARE SAYING

"Using this for my anti-freeze recycling business has saved me time and money."

"I am in love with this instrument. No more large samples. No more phony readings from badly made refractometers."

"Dramatically improved my commercial cooling tower evaluation times."

"I found the refractometer was much easier to use than I thought."

SUMMARY

The Milwaukee digital Ethylene and Glycol refractometer is temperature compensated with a 0 to 100 % volume / 0 to -50°C (32 to -58°F) freezing point / Temperature 0 to 80°C (32 to 176°F) range and +/- 0.2 volume / +/-0.5°C (+/-1°F) freezing point accuracy. It is easy to use with simple two button operation and fast with a response time under 2 seconds. Maintenance is a breeze also with an easy-to-clean sealed flint glass prism and stainless steel well. The MA888 eliminates the uncertainty of optical refractometers by providing and accurate digital readout.

DESIGN FEATURES

• Fast, accurate results with digital dual level LCD readout.
• Easy measurement with just 2-3 drops of sample needed and results less than 2 seconds.
• Simple one-point calibration using distilled or deionized water.
• Easy to clean, stainless steel sample well with unit rated to IP65 as "dust tight" and protected against water jets.
• Battery percent level indicator with automatic shut-off (batteries included).
• Ideal for winemakers, brewers, syrup producers, food producers and many other applications.
• The instrument utilizes internationally recognized references for unit conversion and temperature compensation for ethylene glycol. solutions (e.g. CRC Handbook of Chemistry and Physics, 87th Edition).

WD-05942-45 Buffer Solution, pH 7.00; 4 x 1 gal. Bottles/Cs by Oakton

Ideal for laboratory and field analysis

• All Oakton pH buffers are traceable to NIST standard reference materials
• Buffer solution lets you calibrate pH instruments to ensure accuracy
• If unopened, shelf life is 2 years
• USA buffer value of pH 7.00

S660CDHF pH Sensor, Flat, CPVC, HF, Inline by Sensorex

This specification sheet serves as an addendum to other flat-surface, self-cleaning electrode specifications (submersion, by-pass, in-line and insertion) for use in hydrofluoric acid.

Specifications differences for use in hydrofluoric acid (HF) are shown in SPECIFICATIONS section on the back side of this data sheet. Please note 2 major differences as compared to standard electrodes. First, pH range is 0-12 not 0-14. Second, the temperature range is 0-50 deg C.

This series of sensors are fully compatible with all existing appropriate Sensorex mounting hardware. Calibration of these sensors is as normal with any standard pH electrode using standard pH buffer solutions.

• Resists attack and etching from HF
• Resists coating and fouling
• Installs in seconds with no tools
• CPVC, PVDF (S600)or PPS (S8000) versions available
• Connects to existing Sensorex flat surface mounting hardware

BR250 Borescope, 9mm Camera, 110V by AquaPhoenix

Boroscopes are the ideal tool for inspecting the interior condition of your boiler tubes. Once the cable is inserted and pushed to the length of the boiler tubes, the conidtion of the tubes will be recorded as the cable is drawn back out.

*Please note we can only ship RKI products to customers within the United States

90131-09 Solar-Powered Adjustable-Angle Celsius Thermometer; 9" L by Digi-Sense

View readings from almost any angle by simply adjusting the angle of the head. Three-inch diameter adjustable head has an easy-to-read LCD. Requiring no batteries these thermometers are ideal in pilot plant or research and development applications where exact readings are required. The safety circuit prevents false readings. Each thermometer is housed in a weather-resistant 304 stainless steel (SS) case. Stem is 304 SS. An acrylic lens protects the face. To further protect thermometer order a thermowell from page 1052. Simply match the stem length to the probe depth "A" for the thermowell.

*Please note we can only ship RKI products to customers within the United States

CS300-B-3-N-N-A Process Graphite Contacting Conductivity Sensor, 0.1, 10K, No Cable by Sensorex

Sensorex's CS300 Process Graphite Contacting Conductivity Sensor is designed for light industrial process applications (cooling towers).

• Use with an S855 cable assembly for quick disconnect helping reduce maintenance time in conventional conductivity applications using transmitters.
• Use with the EM802 electronics module and the S856 cable to turn the CS300 into a smart sensor for use directly with SCADA systems.

93830-66 Type J Ungrounded Industrial Thermocouple Probe, 9" L, 1/2" Connection by Digi-Sense

Thermocouple Probes Assemblies are ideal for use in industrial applications, chemical processes, production lines, ovens, furnaces, and vessels. The probes conductor is made of 20 gauge wire encased by ceramic insulators along with a standard size aluminum protection head. Head features a gasketed cap to seal out dust and moisture and houses a ceramic terminal block with screw terminals. Head has a 3/4" NPT (F) opening on the side for easy connection to electrical conduit. 316 stainless steel thermowells are included in assemble and are ideal for applications where removing of the probe without draining the vessel is necessary.

ORP2000-AU Extended Life ORP Sensor, Gold, Ultem, DJ, Green BNC by Sensorex

For more challenging applications and heavyduty use, the ORP2000 Ultem® ORP probe offers enhanced chemical compatibility. Great for testing samples of unknown composition, such as wastewater, these sensors feature double junction reference protection and operate at temperatures up to 80°C.

Features:

• Choose basic, advanced, or premium options based on your application
• Virtually unbreakable with durable polycarbonate or Ultem® bodies
• Compatible with any meter accepting a BNC
• Accurate and reliable REDOX potential measurements
• Instantly ready for use: Extended shelf life (guaranteed for one year)
• One year limited warranty

WD-20250-96 RTD Thermometer, 2-Input Data Logging, NIST-Traceable Calibration by Digi-Sense

The Digi-Sense Professional Single-Input Thermometers offer fast response and laboratory accuracy. Features include automatic backlight, Max/Min readings, and automatic power-off. These thermometers provide precise measurements when accuracy is a must, delivering dependable results every time! Each model is packed with distinctive features for use in a wide array of applications. Robust and reliable constructed to protects against knocks and jars. These thermometers produce a high degree of accuracy, with a rapid response time, and exceptional battery life of up to 3000 hours.

Digi-Sense instrument are fully tested and calibrated to NIST-traceable standards, saving you hundreds of dollars and extra waiting time to calibrate separately.

Advanced features include data logging, USB interface, relative time clock, offset compensation, temperature differential.

Key Features

• Reliable measurements, guaranteed!
• NIST-traceable certificate included
• Heavy duty construction to protect against knocks and jars.
• Super lager LCD for easy viewing of data
• Accepts a wide variety of probes
• Min, Max, and Avg readings, for quick analysis of the object
• Electronic Offset function allows compensation of probe errors
• Data logging models record up to 16,000 measurements for expanded data analysis capability
• Data logging models feature software that provides quick and easy data interpretation
• Temperature differential plus Min, Max, and Avg readings, for quick analysis of the object
• Relative time clock on Min, Max, and Avg provides a time reference for major events
• USB Interface

Includes

Protective rubber armor boot with built-in stand, one 9 V battery, and NIST-traceable calibration report with data supplied by InnoCal. Data logging models 20250-92, -94, and -96 also include a USB cable and software.

S655CD pH Sensor, Flat, CPVC, for Insertion by Sensorex

Without the need for system shutdown for electrode maintenance, the insertion assembly allows pH measurements to be made in pressurized tanks and main lines. The assembly's adjustable insertion depth allows it to be placed in a turbulent flow region, enabling it to operate in the selfcleaning mode.

In abrasive applications, the electrode is best positioned flush with the pipe wall or tank wall. High suspended solids and viscous liquid pH measurements are simple with the insertion assembly and electrode pair. The specially designed internal makes the electrode mountable in virtually any direction, including inverted. A 1" full-port ball-valve (Sensorex BV-1) is recommended for installation.

New part number S656CD has four protective pads to reduce pH glass breakage. The S656CD replaces the 970283 which is now obsolete. In addition to the protective pad feature, the S656CD also includes our high performance acrylamide gel that provides longer life in many applications.

• Quick disconnect design saves time and money
• Installs in seconds, no tools necessary
• Flat-surface design resists coating
• CPVC or PVDF construction
• Available with or without ATC elements
• Protective tip reduces pH glass breakage (S656CD)

High Pressure Mist Kit for 24" Fan