$20 - $25

Part Number: GAAG3

TDS15000 Conductivity Solution, 15,000ppm/16,630uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

HA6310-B Hydrochloric Acid, 10% v/v (1:9), 60mL by AquaPhoenix

• Hydrochloric Acid Solution/UN1789

Specifications

• Packaging Type: Poly
• Size: 60 mL
• Concentration: 10% v/v

AI1124-L pH 3.00 Calibration Buffer Solution 16oz by Apera

The Apera Instruments pH 3.00 Calibration Buffer Solution is standardized against NIST certified pH references within 0.01 pH at 25°C (77°F). It's ideal for the calibration of pH meters that have customized calibration functions (e.g. Apera PH800, PH820, SX811).

pH value is affected by temperature variations. A temperature/pH reference chart is provided on the bottle label for reference.

All the solutions are double-sealed, not subject to the DOT shipping restrictions, and have a 2-year shelf life. The expiration date is printed on the bottle. MSDS documents are downloadable.

Note: Store at room temperature and away from direct sunlight. Keep the bottle tightly closed when not in use. Keep out of reach of children.

• High Accuracy (±0.01 pH): standardized against NIST certified pH references within 0.01 pH at 25°C (77°F).
• Ideal for the calibration of all kinds of pH meters/testers
• Double-sealed, 2-Year shelf life
• Expiration date and Temperature/pH reference chart provided for reference
• Non-hazardous product (MSDS is downloadable)

TDSK1413 Conductivity Solution, 1413uS KCl, 1Qt. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

ND2270-B Nitrite Titrant (CAN Solution), 60mL by AquaPhoenix

• 1 drop = 50ppm as NaNO2/5mL

Specifications

• Packaging Type: Poly
• Size: 60 mL

1102-1 Ball & Chain Safety Mechanism for 1004-HC Deadman Control by Western Technology

The Ball & Chain, p/n: #1102 or #1102-1 is designed as an integral part of the safety features of these products. If the operator drops the blast hose the ball will dislodge and automatically disengage the switch and the system will shut down.

P/N #1102 is to be used with:

• 1001-4K | 2-Wire Sealed Electric Deadman Control
• 1001-REPK | 2-Wire Repairable Electric Deadman Control
• 1001-REP-3K | 3-Wire Repairable Electric Deadman Control

P/N #1102-1 is to be used with:

• 1004-HC Wrist-EZ | Repairable Electric Deadman Control

Comes standard with our Deadman Control Switches... add this to your inquiry cart to purchase separately, or as extra, additional ball & chains.

Part Number: MC2BC1

Part Number: CP-TC-1

TDS9523 Conductivity Solution, 9523ppm/10,000uS, 1Qrt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

TDS18 Conductivity Solution,11.4ppm/18uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Part Number: GASFIL

BW Technologies Test Cap and Hose Replacement (1 foot or .3 meters)

For customization and maintenance, BW Technologies manufactures a variety of replacement parts and accessories. The product offerings are cost effective solutions that help to extend the life of the device and preserve the integrity of the equipment. The BW Technologies Test Cap and Hose Replacement contain a hose that is approximately 1 foot in length (or .3 meters) and a secure cap. To ensure compatibility, please consult your device's specification sheet.

Part Number: MCTC1

AI1129-L pH 11.00 Calibration Buffer Solution 16oz by Apera

The Apera Instruments pH 11.00 Calibration Buffer Solution is standardized against NIST certified pH references within 0.01 pH at 25°C (77°F). It's ideal for the calibration of pH meters that have customized calibration functions (e.g. Apera PH800, PH820, SX811).

pH value is affected by temperature variations. A temperature/pH reference chart is provided on the bottle label for reference.

All the solutions are double-sealed, not subject to the DOT shipping restrictions, and have a 2-year shelf life. The expiration date is printed on the bottle. MSDS documents are downloadable.

Note: Store at room temperature and away from direct sunlight. Keep the bottle tightly closed when not in use. Keep out of reach of children.

• High Accuracy (±0.01 pH): standardized against NIST certified pH references within 0.01 pH at 25°C (77°F).
• Ideal for the calibration of all kinds of pH meters/testers
• Double-sealed, 2-Year shelf life
• Expiration date and Temperature/pH reference chart provided for reference
• Non-hazardous product (MSDS is downloadable)

RAD-60 Nylon Carrying Case by SE International

Designed exclusively for use with the Rados brand 5X & 6X Series electronic dosimeters helps to realize substantial savings on clip replacement and dosimeter repairs. Experience less down time for you in-house inventory all with a unique design the allows for secure use on a lanyard, belt or other device. Carrying cases are also equipped with belt clip or belt loop.