$20 - $25

Part Number: STAND

59-300-1M RG59/U, BNC Male to BNC Male, 25 feet by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

MA9072S Oxygen Membrane Electrolyte Refill Solution For Use with MA861 probe and MW605 Dissolved Oxygen Meter - 30 ml Bottle by Milwaukee

The MA9072S electrolyte fill solution is designed for Milwaukee's MA860 Galvanic Dissolved Oxygen probe and MA861 Dissolved Oxygen membranes. A high quality electrolyte solution is crucial to the performance of your dissolved oxygen probe.

DESIGN FEATURES

PRECISE FORMULATION

Factory mixed using reagent grade chemicals in a dedicated, temperature controlled environment.

TRACEABLE

Product labeled with product code, lot number and expiration date.

SECURE

Air tight bottle with tamper-proof seal.
Easy drop tip for accurate volume control.

EXTRA TIPS

• Watch for the membrane having wrinkles or stretch marks. If you see wrinkles, replace with a new membrane.
• Always use fresh electrolyte solution (MA9072S).

Length(MM) & Diameter : 225 X Ø16.00
Temperature: -100°C ~ +400°C OR -148°F ~ +752°F

90433-81 Thermowell, 304 Stainless Steel, 4" Length, 1/2" Connection by Digi-Sense

To match your probe to a thermowell, first measure the distance from the probe's tip to the top of the thread (typical thread length is 0.5" for 1/2" NPT fittings). Next, match this length to the probe depth of the thermowell ("A" dimension). Other thermowell sizes and materials are available - call our Application Specialists for more information.

• Limited-Space Thermowell when you need a shorter insertion depth.
• Standard Thermowell for general-purpose applications.
• Heavy-Duty Thermowell for higher fluid velocity ratings.

90433-93 Thermowell, 316 Stainless Steel, 2.5" Length, 1/2" Connection by Digi-Sense

To match your probe to a thermowell, first measure the distance from the probe's tip to the top of the thread (typical thread length is 0.5" for 1/2" NPT fittings). Next, match this length to the probe depth of the thermowell ("A" dimension). Other thermowell sizes and materials are available - call our Application Specialists for more information.

• Limited-Space Thermowell when you need a shorter insertion depth.
• Standard Thermowell for general-purpose applications.
• Heavy-Duty Thermowell for higher fluid velocity ratings.

0572 2152 Door Contact Connecting Cable, Mini DIN Plug for Saveris 2-T2 by Testo

Your data logger records temperature fluctuations in a freezer or refrigerator. Is it possible that the door has not been closed properly?

The door contact connection cable means you can connect your appropriate data logger with a standard door contact (neither are included in the scope of delivery). In this way, the opening or closing of doors can be recorded, for example in refrigerators, deep-freeze rooms or chest freezers. The data logger triggers an alarm if required.

The door contact connection cable helps you to determine whether the refrigerator door may not have been closed (in good time). Because possible connections between temperature changes and the opening of the door can easily be detected in the data analysis.

• To connect data loggers and standard door contacts
• Enables the opening of refrigerator doors to be recorded
• Determine whether temperature fluctuations arise due to a door being opened

The door contact connection cable means you can connect your appropriate data logger with a standard door contact. The data logger can therefore record the opening of doors (e.g. refrigerator doors).

Delivery Scope

Door contact connection cable (2-core connection cable with mini DIN plug).

08068-46 Irreversible 4-Point Micro Horizontal Temperature Label, 180-309F; 10/Pk by Digi-Sense

Labels are made up of a series of temperature-sensitive elements sealed between heat-resistant substrates with transparent windows. Each element changes color distinctly as its rated temperature is met or exceeded. The changes to the label are irreversible, providing a temperature history of the surface being monitored. The labels will not delaminate when removed, allowing them to be attached to an inspection report to serve as a permanent record. Ideal for use in the food, automotive, molding and metal working industries. Accuracy is ±1.8°F below 212°F and ±1°F above 212°F. Shelf life: 1 year after date of purchase.

Reliable proof that the product was maintained at the correct temperature

• Used as a quick inspection tool that the product is in usable condition during the shipping and receiving process
• Save time and money due to costly recalls
• Self-adhesive design

HP1003-B Hydrogen Peroxide, 3% v/v, 60mL by AquaPhoenix

Specifications

• Packaging Type: Poly
• Size: 60 mL
• Concentration: 3% v/v

CAREKITPHCONL Probe Care Kit - pH & Conductivity by Bluelab

Probe cleaning is one of the most important parts of owning or operating any Bluelab® meter, monitor or controller.

The probe surface is where the instrument takes the reading of the solution or soil/media. If the probe face is dirty or contaminated, then the reading will be inaccurate.

Accurate readings simplify crop management and provide improved growth.

Use Bluelab® Solutions to re-stock your probe care kit.

Features

• 20ml / 0.67fl oz single-use Bluelab Solution Sachets, 2 each of: pH 7.0 & pH 4.0, KCl and 2.77 EC
• 3 plastic cups
• Bluela® pH Probe Cleaner
• Bluelab® Conductivity Probe Cleaner
• Bluelab® Toothbrush (pH probe cleaning instrument)
• Bluelab® Chamois (conductivity probe cleaning instrument)