$150 - $200

*Please note we can only ship RKI products to customers within the United States

Old Part Number: 101810N
New Part Number: J101810PN

90551-39 Sil-Filled Bottom-Con Bimetal Thermometer, 3" Dial, 24" L/0-250F/-20-120C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for Acrylic lens thermometers is 200°F (93°C).

• Dampened movement
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with Acrylic lens
• Recalibrate using the external reset screw
• For use in applications that do not exceeding 200F

08082-03 TI.32 6 Bimetal Thermometer, Filled, Adjustable Angle, 3" Dia/6" L; 50-300F/10-150C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases).

Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for Acrylic lens thermometers is 200°F (93°C).

Key Features

• Dampened movement
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with Acrylic lens
• Recalibrate using the external reset screw
• For use in applications that do not exceeding 200°F

4339-H Spin Touch Disks, 50 pack by AquaPhoenix

For use with LaMotte WaterLink Spin Touch Photometer. Includes 50 cooling tower disks. Each disk provides 1 test for all parameters.

Alkalinity, Total (0-250 ppm)
Bromine (0.00-33.00 ppm)
Chlorine, Free (0.00-15.00 ppm)
Chlorine, Total (0.00-15.00 ppm)
Chlorine, Combined (0.00-15.00 ppm)
Copper (0.00-6.00 ppm)
Hardness, Calcium (0-800 ppm)
Hardness, Total (0-1200 ppm)
Iron, Total (0.0-6.0 ppm)
Phosphate (In Development)
Silica (In Development)

FB7690-G Fluoride Buffer, 4L by AquaPhoenix

• SeeTISAB III
• APHA For Fluoride, 4500-C

Specifications

• Packaging Type: Poly
• Size: 4.00 L

Part Number: J19711000PA

WD-17001-10 InnoCal NIST-Traceable Calibration; Thermocouple Probe (Probe Only) by Oakton

All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's) and test uncertainty ratios (TUR's) at no additional cost!

NIST-traceable calibration allows you to confirm that the specific asset you purchase does in fact meet the manufacturer's published specification. Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays. EPA, USDA, ISO and GLP/GMP standards require regular NIST-Traceable calibration of all test equipment being used in critical applications.

Calibrations on thermocouple probes are performed using direct comparison in high-stability liquid and dry baths using high-precision PRT's and SPRT's and displays. Measurements can be performed at four points between -197C and 1300C. Points are generally selected at standard ITS-90 points across the range of the probe but customer-specified points can be accommodated. This calibration is for the thermocouple probe only; if you want the probe calibrated with a meter as a system, see sku 17002-10.

• Provides traceability to NIST
• Lists the environmental conditions present at time of calibration
• Certificate lists actual values, uncertainties, and tolerances
• Regular calibration helps you meet ISO, EPA, GLPs/GMPs and other quality standards
• Not an accredited certificate

Includes

Calibration reports issued by InnoCal may not be reproduced, except in full, without written permission of InnoCal. The results stated in our reports relate only to the items tested or calibrated.

08082-01 TI.32 6 Bimetal Thermometer, Filled, Adjustable Angle, 3" Dia/6" L; 0-250F/-20-120C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases).

Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for Acrylic lens thermometers is 200°F (93°C).

Key Features

• Dampened movement
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with Acrylic lens
• Recalibrate using the external reset screw
• For use in applications that do not exceeding 200°F

Measuring Range: -60 to 1000°C

93831-97 RTD Probe, 100 Ohm, ANSI 3-Blade Connector, 9" L, 3ft SS Braid Cable by Digi-Sense

Maximum error for probe assembly is ±1.1°C + 0.12% of reading below 300°F, ±0.35% of reading above 300°F. Alpha coefficient is 0.003850 Ω/Ω/°C (DIN IEC 751). Resistance at ice point (0°C) is 100 Ω.

Note: Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five.

Note: The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Time Constant: 1-3 seconds or greater
• Custom designs or changes to this product are available upon request

08541-46 Thermocouple, Stranded Wire, Type-J, 20-Gauge, FEP Insulation. 100-ft Spool by Digi-Sense

Wire comes in 24-gauge size, ideal for fabricating your own probes or extension cables (meets ANSI and ASTM standards). Choose from wire with polyvinyl chloride (PVC), fluorinated ethylene propylene resin (FEP/FEP), fiberglass, high-temperature fiberglass, or ceramic fiber outer/inner insulation. These cables are also available in 100-ft or 1000-ft lengths for any application.

0560 2605 03 605i Thermohygrometer Smart Probe 350 ft Bluetooth range by Testo

The testo 605i Smart Probe thermo-hygrometer is a humidity and temperature measuring instrument that quickly and accurately measures relative humidity, dew point, and temperature in rooms, ducts, registers, and environmental boxes/chambers. Users can read the measurements using the testo Smart Probes App installed on their smart device. Smart Probes can be used individually or combined with other Smart Probes to create measuring solutions for most HVAC/R applications. Great for setup and diagnostics of large and small HVAC/R systems!

The testo 605i works on smart devices with either Android or Apple operating systems.

The testo Smart Probes App is a powerful and easy-touse tool. It allows you to remotely read measurements from up to six (6) Smart Probes and easily document/report the results. Automatic calculations make it a snap!

All measurement data is displayed as instrument readings, tables, or graphs. The measurements can be quickly saved as PDF or Excel files. The App creates custom reports which can be saved and/or shared by email. All your data can be stored and retrieved saving you hours of time consuming paperwork!

• Quickly and accurately measures relative humidity and temperature in rooms, ducts, and chambers
• Automatically calculates dew point & wet bulb temperature
• Probe now foldable to 90°
• Bluetooth range of up to 350 feet
• Small diameter probe is ideal for in-duct measurements
• Tough, accurate, and easy-to-use
• For all HVAC/R technicians and contractors

93831-74 Bendable RTD Probe, 100 Ohm, ANSI 3-Blade Connector, 18" L, 5ft Coil Cord by Digi-Sense

Maximum error for probe assembly is ±1.1°C + 0.12% of reading below 300°F, ±0.35% of reading above 300°F. Alpha coefficient is 0.003850 Ω/Ω/°C (DIN IEC 751). Resistance at ice point (0°C) is 100 Ω.

Note: Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five.

Note: The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Time Constant: 1-3 seconds or greater
• Custom designs or changes to this product are available upon request