$150 - $200

Part Number: 103L-367

90445-66 Low-Ranger TD, 3-Wire, 100 Ohm, 1/4" OD, 12" L, Al/SST, 0.1% by Digi-Sense

These RTD assemblies consist of a single Low Range or High Range Wire Wound element constructed of 316 Stainless Steel sheath material, assembled together with an Aluminum screw cover connection head.

• 316 Stainless steel sheath material
• 1/2"' X 1/2"' NPT stainless steel hex nipple for head mounting fittings
• Aluminum screw cover connection head
• Low range or high range wire wound elements
• .00385° C temperature coefficient
• Custom built assemblies available upon request

103174-002 PVC Discharge Hose, 3" x 25', Male/Female Couplers by Pelsue

Pelsue provides a full range of hose to support our submersible pump line. Dimensions and materials are listed below.

Part Number: 221L-315

39009-78 PRB RTD CIP CONNECT W/ POLY HD by Digi-Sense

These RTD assemblies consist of a single Low Range or High Range Wire Wound element constructed of 316 Stainless Steel sheath material, assembled together with an Aluminum screw cover connection head.

Key Features

• 316 Stainless steel sheath material
• 1/2" X 1/2" NPT stainless steel hex nipple for head mounting fittings
• Aluminum screw cover connection head
• Low range or high range wire wound elements
• .00385° C temperature coefficient
• Custom built assemblies available upon request

Part Number: 221L-321

90510-01 Sil-Filled Adjustable Angle Bimetal Thermometer, 3" Dial, 2.5" L/0-250F/-20-120C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for Acrylic lens thermometers is 200°F (93°C).

• Dampened movement
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with Acrylic lens
• Recalibrate using the external reset screw
• For use in applications that do not exceeding 200°F

Part Number: 221L-37-300

Old Part Number: Z107950
New Part Number: Z107950PN

Part Number: 221L-325

378KC Digital Thermometer Controller with Analog Voltage Output, Range 0 to 1000 °C by Jenco

Panel mount digital thermometer controller with analog voltage output of 1 mV per count, ± 3%, bright red LED display, 1/8 DIN plastic housing, hysteresis is ± 3°C or ± 5°F. Proportional Band-Width control from 5%, 378KF, 10% 378 KC/JF and 20% of span for 378 JC. Features manual adjust reset. Cycle time is 20 seconds ± 3 seconds. 115/230V AC operation.

Measuring Range: -50 to +275 °C

2015HD 8" Diameter x 15' Hheavy Duty Duct, Sleeve One End by Pelsue

Pelsue's Standard Ventilator Hoses are made to be compatible with Pelsue Blowers. Made of Polyester with a neoprene coating heat reaction (HRT), these hoses are built to last. These hoses are available both glued and sewn, in a variety of lengths, and with or without insulation. All hoses have a tension buckle and strap at one end.

MAC-30W-DDF 30" High Capacity Direct Drive Drum Fan by Master

Master's MAC-30W-DDF Barrel Fan keeps your space feeling cooler by circulating large volumes of air.

Great for spaces with or without air conditioning, Master's 30" Barrel Fan can take the edge off of your monthly energy bill. Circulate some air through before turning on the A/C, or leave the A/C off altogether.

The MAC-30W-DDF utilizes our efficient direct drive design, which helps to conserve electricity. It also features our convenient fold-out wheel design that makes mobility easy and storage simple.

Whether it's a warehouse, garage, barn, or a crowded summer gathering, Master High Capacity Fans are an efficient way to cool all types of spaces.

• 2 Speeds
• 3-blade, oversized fan
• All metal construction

90550-50 Dampened Bottom-Con Bimetal Thermometer, 3" Dial, 4" L/50-550F/10-290C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Dampened movement
• More economical than silicone gauges
• Greater temperature range than a silicone-filled gauges
• Anti-parallax dial for accurate readings
• Eliminate the risk of a leaking case and cross-contamination
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments