$150 - $200

2015HD 8" Diameter x 15' Hheavy Duty Duct, Sleeve One End by Pelsue

Pelsue's Standard Ventilator Hoses are made to be compatible with Pelsue Blowers. Made of Polyester with a neoprene coating heat reaction (HRT), these hoses are built to last. These hoses are available both glued and sewn, in a variety of lengths, and with or without insulation. All hoses have a tension buckle and strap at one end.

Old Part Number: 197150MX1
New Part Number: J197150LM1

2606945 Ammonia HR Reagent Set (Hach) by AquaPhoenix

For determination of High Range Ammonia Nitrogen by the AmVer™ Salicylate Test 'N Tube™ Method.
Hach Method 10031. Range: 0.4 - 50.0 mg/L NH3-N.
Set contains AmVer™ Diluent Reagent High Range Test 'N Tube™, Ammonia Salicylate Reagent Powder Pillows and Ammonia Cyanurate Reagent Powder Pillows. 25-50 tests (dependent upon the number of reagent blank tests performed).

Test 'N Tube products provide safe, convenient testing
Easy ordering

LabSen 823 Glass Combination pH/Temp. Electrode for Dairy Products and Liquid Food by Apera

Backed by proprietary Swiss sensor technologies and materials, the LabSen® 823 Glass Combination pH/Temperature Electrode/Probe is designed for testing pH for dairy products such as milk, cream, yogurt, and other liquid food such as mayonnaise, jam, BBQ sauce, syrup, etc.

Silver Ion Trap Reference System+Protelyte Electrolyte - The LabSen 823 pH/Temperature Electrode/Probe adopts a Silver Ion Trap reference system and Protelyte reference solution. On top of the Long-Life reference system, a silver ion trap is added to prevent the junction from being blocked or contaminated by proteins.

LabSen unique blue hemispherical glass membrane - faster response time, better repeatability, and built tough, highly resistant to general impact (totally differentiates from the traditional fragile glass bulb membrane); and can be tested in high-temperature samples (up to 225°F).

Patented pH/Temperature combination structure - The temperature element is placed in an independent cavity under the pH glass membrane. With the built-in heat conducting medium, the temperature sensing speed can be increased by 40%, hence the response time and stability of the pH electrode are greatly improved.

Compatible with Apera Instruments' meters such as PH700, SX823-B, MP511, PH800, and PC800. May NOT work with other brands' meters because the temperature unit might be incompatible.

The electrode is backed up with a 6-month warranty by Apera Instruments.

• Proprietary pH sensor technology and materials from Switzerland
• Designed for milk and other liquid food that contain proteins
• Silver Ion Trap Reference System + Protelyte reference solution, preventing the electrode from being contaminated by proteins
• Patented pH/Temperature combination structure, increasing the temperature response time by 40% compared to a conventional isolated built-in thermistor
• Unique LabSen hemispherical glass membrane, which has a faster response rate, better repeatability, and built tough

Part Number: J10351VM1

*Please note we can only ship RKI products to customers within the United States

08506-75 Type T Fine -Gauge PTFE-Insulated Thermocouple Probe by Digi-Sense

All insulated-wire probes include straight insulated cable with no handle and feature ANSI color-coded miniconnectors: type T-blue. This is a fine-gauge PTFE-insulated probe, with a 0.025" outer diameter and is 3-ft long. This is a tissue implantable microprobe, ideal for semisolids.

• Ideal for chemical resistant applications

Includes

five 18-gauge hypodermic needles.

106000-01G Dye, Red, Industrial, 1 gallon by AquaPhoenix

We offer a full-line of fluorescent dyes to help detect leaks in your closed loop system. The dyes are available in several strengths and sizes and can be used in liquid, powder, or tablet form.

CS200-K=10/BNC Light Duty Online Conductivity Sensor, Platinum, 12mm, K=10, BNC by Sensorex

The CS200 and CS200TC conductivity probes are a cost effective solution for measuring conductivity in light industrial and laboratory applications.

Models CS200 and CS200TC feature platinized measuring surfaces that provide accurate and repeatable measurements. Rugged epoxy bodies make the sensors virtually unbreakable. These are an excellent choice to use as standard laboratory conductivity electrodes.

By adding a simple mounting gland fitting, customers may use these in process applications. Mount them in-line, in a pipe "T" fitting, or submerse them into a tank.

Features

• Ideal for laboratory and light duty process applicationsAvailable with or without ATC (temperature sensor)
• Easy to submerge in a tank or mount inline in a pipe
• Cell constant choices of 0.1, 1, or 10
• Compatible with most portable and benchtop meters

18526-57 Type J Flat-Leaf Thermocouople Probe, with Mini-Connector, 4.5" L, 5ft Coil Cord by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Ideal for measuring in hard to reach spaces due to a flexible tip
• Designed for extremely fast response due to the low mass but yet more durable than other miniature diameter probes (.035" thick at tip)
• Response Time: .75 seconds or greater
• Each probe comes with a color coded ANSI coiled cable: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

850081C/SG Pt Glass Low Conductivity Probe by AquaPhoenix

For use with the following:

Water Quality Meter - 850081
Water Quality Meter Kit - 850086

106001-01G Dye, Yellow/Green, 1 gallon by AquaPhoenix

We offer a full-line of fluorescent dyes to help detect leaks in your closed loop system. The dyes are available in several strengths and sizes and can be used in liquid, powder, or tablet form.

Old Part Number: 315930N
New Part Number: J315930PN

517651BT Orthophosphate LR Reagent Set 0.05-4 mg/L by AquaPhoenix

Lovibond® Combi-Pack of Phosphate Low Range No 1 and No. 2 Tablets, 100 each

Test tablets are manufactured in Germany under tightly controlled conditions on the latest machinery. Maintaining the highest quality standards permits Tintometer GmbH to guarantee our reagent tablets for a minimum of 5 years, and some for as long as 10 years. We can make this promise because each tablet is hermetically sealed within an individual aluminum foil, protecting against challenging environmental conditions. This packaging keeps each tablet in perfect condition, right up until the time it is needed by the user. Test tablets remain the most consistent and reliable reagent format available, consistently outperforming other reagent formats, and delivering maximum accuracy for the user.

Now we have improved even further on this highly successful format. To the tight quality control processes, integral to Lovibond®'s tablet manufacture, and the simple test procedures, we have added new blister packaging. Our new aluminum foil blister packaging brings added convenience to the tradition of protection achieved in Lovibond's long established tablet production technology.

With the new blister strip, the user just pushes the tablet through the protective foil, straight into the sample. Simple, time-saving and practical. This type of packaging, long established in pharmaceutical applications, combines all the advantages of protective foil, with convenience for the user. Each tablet is contained within an individually formed foil cup, lined with the latest aluminum composite material, and guaranteeing product performance.

As a result of improved sealing efficiency, the blister pack has been reduced in size to 91 × 34mm making them even more convenient for storage and shipping. 'BT' is added to the end of the code to identify the new style of packaging. There are no safety risks if the tablets are used in line with the instructions supplied. Safety data sheets are available for all reagents.