$150 - $200

WD-17000-06 InnoCal NIST-Traceable Calibration; Thermistor Meter (Meter) by Oakton

All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's) and test uncertainty ratios (TUR's) at no additional cost!

NIST-traceable calibration allows you to confirm that the specific asset you purchase does in fact meet the manufacturer's published specification. Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays. EPA, USDA, ISO and GLP/GMP standards require regular NIST-Traceable calibration of all test equipment being used in critical applications.

InnoCal's Metrology Laboratory is accredited to ISO/IEC Guide 25 by the American Association for Laboratory Accreditation (A2LA); certificate number 1746.01. This accreditation is your assurance that one of the foremost outside auditing agencies approves of our internal laboratory policies and procedures.

• Provides traceability to NIST
• Lists the environmental conditions present at time of calibration
• Certificate lists actual values, uncertainties, and tolerances
• Regular calibration helps you meet ISO, EPA, GLPs/GMPs and other quality standards
• Not an accredited certificate

Includes

Calibration reports issued by InnoCal may not be reproduced, except in full, without written permission of InnoCal. The results stated in our reports relate only to the items tested or calibrated.

BW Technologies Particulate Pump Filter Replacement (Kit of 100)

Regular maintenance and inspection is critical to ensuring the accuracy and effectiveness of any BW Technologies portable gas detection instrument. Although these instruments require very minimal maintenance, users should always inspect the filter and the pump. When it is appropriate, users can replace their filters with a BW Technologies replacement filter. Having a clean filter helps to ensure that the device is adequately protected from dust, debris, and moisture. This particular replacement filter kit is compatible with particulate pumps and is available in a kit of 100.

Part Number: GAPFMAX100

PH60F-Z Smart Pocket Flat pH Tester Kit by Apera

The Apera ZenTest® PH60F-Z Smart Flat pH Pocket Tester is the next-generation water tester designed for seamless water test experience. Professional pH measurements for flat surface, small-volume liquid samples, and general water solutions now become easier than ever. ORP test is also available with an ORP probe (sold separately).

Just connect the tester to your smartphone via Bluetooth in the ZenTest mobile App (Free download in iOS App Store/Google Play Store), the step-by-step smart guide will lead you to become a water test professional with just a few taps.

Save and share your measurement and calibration data right on the palm of your hand via email. Data will never get lost thanks to the cloud-based data system.

AI3105 LabSen 251 Glass-body Spear pH Electrode for Semi-Solid Samples by Apera

Built with proprietary sensor technology and premium materials from Switzerland, Apera LabSen 251 Glass-body pH Electrode is designed for direct pH test of semi-solid samples as well as general water solutions.

LabSen S-type spear glass membrane - low resistance and high firmness, rendering fully stabilized readings in 15 to 30 seconds, and is yet 10 times stronger than traditional glass membranes, highly resistant to general impact, eliminating the chance of accidental breakage when inserting into semi-solid samples.

Open&Ceramic double-junction with Polymer electrolyte - ensures full contact with test samples while minimizing junction clogs. No need to refill electrolyte.

Long-Life Reference System - composed of a glass tube, AgCl, and a reference silver wire. The top end of the slim glass tube is stuffed with cotton, which prevents the reaction between AgCl and electrolyte when the temperature changes. It improves the stability of reference electrode and extends the service life of the electrode.

The electrode uses a standard BNC connector, compatible with any pH meters that use BNC connectors. No temperature sensor is built-in. Users need to have a separate temperature probe (ex: Apera MP500) to enable ATC or manually input temperature to achieve temperature compensation.

• Spear sensor designed for direct pH test of semi-solid samples
• LabSen S-type glass membrane, featuring fast response and high firmness
• Open&Ceramic double-junction with Polymer electrolyte
• Long-Life Reference System - improves the stability of the reference and extends the electrode's service life

94460-43 Traceable Memory-Loc™ Datalogging Thermometer with Calibration; 2 Bullet™ Probes by Digi-Sense

Easily monitor temperatures overnight or for any time period - stores over 1 million temperature observations. Datalogger will stop recording when storage is full and will not overwrite recorded data. Memory can be cleared after downloading data and alarm events. Set high and low alarms in 1° increments; alarm sounds when temperature rises above or falls below set points. The alarm tracking feature stores data for up to 10 different alarm events detailing when the alarm state occurred, as well as when the unit returned within range. Alarm state indicator include audio alerts and flashing LCD segments. Transfer data recorded in a CSV format to any computer via a USB flash drive - no software is required. Unit continues to record data while downloading data. Sampling rate is 5 sec (10 sec for models 98768-55, -56, -59, and -60). Select logging interval ranging from 1 min to 24 hours. Other status indicators include low-battery, memory full, USB data transfer, and active alarm state. Probe is attached to a 10-ft (3 m) microcable that permits a door to close on it. Mount meter with included hook-and-loop strips, wall-mount slots, or use flip-open stand on benchtop.

Select from glycol-filled glass, or vaccine bottle probe(s), standard plastic Bullet™ probe(s), or stainless steel probe(s). Bottle probes contain nontoxic glycol solution which is considered GRAS (generally recognized as safe) by the FDA. The solution filled bottle simulates the temperature of other stored liquids and eliminates the rapid temperature fluctuation caused by opening the refrigerator/freezer door. Vaccine bottles are designed to fit vaccine trays. Use standard Bullet probe to measure air and liquid temperatures. Bullet probe sensor and cable may be completely immersed; sensor measures 3/4"L x 0.187" dia (19 x 4.75 mm). Durable stainless steel probes measure 6-1/4"L x 0.125" dia (159 x 3.18 mm) and withstand both low and high temperatures - ideal for measuring temperatures of air, liquids, and semi-solids.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Thermometer has 2 wire probes with bullet style end and is designed for general-purpose applications.

Key Features

• Store up to 10 unique alarm events, memory can be cleared after downloading data
• Smart-Alarm™ with visual/audible alarm continues to alert even if the unit returns to nonalarm conditions
• Triple-display - shows high, low, and current temperature simultaneously
• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Probe and cable are submersible

Includes

NIST-Traceable calibration certificate with data, Bullet probes with 10-ft cable, magnetic strips, hook-and-loop strips, flip-open stand, and batteries.

Part Number: 221L-349

FH-1200 12" Fiberglass Weatherhood with Mounting Flange by Schaefer

• Draws outside air through walls up to 6" thick
• Mounts flush to an interior wall
• Weatherhood protects bird screened inlet from the elements
• Durable polyethylene housing with insulated damper door and air-stop door adjust airflow volume and direction with the seasons

LabSen 553 Plastic Combination Spear pH/Temp. Electrode by Apera

Backed by proprietary Swiss sensor technology and materials, the LabSen® 553 3-in-1 pH/Temp. Spear Electrode/Sensor/Tester is designed for testing soil directly (This is a replacement probe for Apera PH850-SL, PH9500-SL).

Long-Life Reference System - The LabSen 553 pH electrode adopts a long-life reference system, which is composed of a glass tube, AgCl and a reference silver wire. The top end of the slim glass tube is stuffed with cotton, which prevents the reaction between AgCl and electrolyte when the temperature changes. It improves the stability of reference electrode and extends the service life of the electrode.

Polymer Electrolyte - The solid polymer electrolyte makes the electrode hard to be contaminated and maintenance-free.

Special Glass Membrane - The LabSen 553 pH electrode adopts a spear sensor tip, which is ideal for directly testing semi-solid samples like soil.

Compatible Apera Instruments' meters: PH700, SX823-B, MP511, PH800, PC800. May NOT work with other brands' meters because the temperature unit might be incompatible. The electrode is backed up with a 6-month warranty by Apera Instruments.

• Proprietary pH sensor technology and materials from Switzerland
• Special LabSen Spear pH sensor tip, ideal for direct soil pH testing. No more slurry making.
• Pom housing, ideal for use in harsh environments
• Polymer electrolyte - not more clogged junction
• Long-life reference system, improving the stability of reference electrode and prolong the service life of the electrode

08084-09 TI.30 12 Silicone Filled Back-Con Bimetal Thermometer, 3" Dial, 12" L/25-125F/-5-50C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases).

Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for Acrylic lens thermometers is 200°F (93°C).

Key Features

• Dampened movement
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with Acrylic lens
• Recalibrate using the external reset screw
• For use in applications that do not exceeding 200°F

Part Number: J1011100PM1

WD-05942-25 Buffer Solution, pH 4.01; 4 x 1 gal. Bottles/Cs by Oakton

Ideal for laboratory and field analysis

• All Oakton pH buffers are traceable to NIST standard reference materials
• Buffer solution lets you calibrate pH instruments to ensure accuracy
• If unopened, shelf life is 2 years
• NIST/USA buffer value of pH 4.01

Part Number: J1971

*Please note we can only ship RKI products to customers within the United States

93830-67 Type J Ungrounded Industrial Thermocouple Probe, 12" L, 1/2" Connection by Digi-Sense

Thermocouple Probes Assemblies are ideal for use in industrial applications, chemical processes, production lines, ovens, furnaces, and vessels. The probes conductor is made of 20 gauge wire encased by ceramic insulators along with a standard size aluminum protection head. Head features a gasketed cap to seal out dust and moisture and houses a ceramic terminal block with screw terminals. Head has a 3/4" NPT (F) opening on the side for easy connection to electrical conduit. 316 stainless steel thermowells are included in assemble and are ideal for applications where removing of the probe without draining the vessel is necessary.

Part Number: CG2H20