$1000 - $2000

73-1204-05-CSA EC-600 Indoor Carbon Monoxide Monitor, 0-150 ppm, 115 VAC Operation with 5 Meter Sensor Cable, CSA Version by RKI Instruments

RKI's Model EC-600 is an indoor, standalone monitor that detects Carbon Monoxide (CO) with a range of 0-150 ppm with 1 ppm increments. It's sleek, low-profile design is equipped with a unique tri-color display, which changes color as Carbon Monoxide levels reach each alarm level. It is capable of operating with three different power options; 115 VAC, 24 VDC or alkaline batteries. The EC-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord in its AC version. If Carbon Monoxide is present, the user is notified by an audible alarm tone and the multicolored LED digital display.

The EC-600 uses a fast responding low-cost plug-in style electrochemical sensor. This long life sensor is fieldreplaceable with no special tools required. The sensor can also be remotely mounted with an optional remote sensor cable.

Features

• Operates with or without a controller
• Tri-color visual alarm display: Green=Normal, Yellow=Alarm 1, Red=Alarm 2
• Large easy to read digital display
• Three power options: 115 VAC, 24 VDC, or 2 AA alkaline batteries
• Operates up to 1 year on one set of AA alkaline batteries
• Remote mount sensor cable available
• Compact wall mount design

Applications

• Iron and steel industry
• Laboratories
• Boiler rooms
• Garages and tunnels
• Vehicle service areas
• Engine testing
• Shipping / receiving docks
• Multi-occupancy residences

*Please note we can only ship RKI products to customers within the United States

73-1204-10 EC-600 Indoor Stand Alone Carbon Monoxide Monitor, 0-150 ppm, 115 VAC Operated, with 10 Meter Extender Cable by RKI Instruments

RKI's Model EC-600 is an indoor, standalone monitor that detects Carbon Monoxide (CO) with a range of 0-150 ppm with 1 ppm increments. It's sleek, low-profile design is equipped with a unique tri-color display, which changes color as Carbon Monoxide levels reach each alarm level. It is capable of operating with three different power options; 115 VAC, 24 VDC or alkaline batteries. The EC-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord in its AC version. If Carbon Monoxide is present, the user is notified by an audible alarm tone and the multicolored LED digital display.

The EC-600 uses a fast responding low-cost plug-in style electrochemical sensor. This long life sensor is fieldreplaceable with no special tools required. The sensor can also be remotely mounted with an optional remote sensor cable.

Features

• Operates with or without a controller
• Tri-color visual alarm display: Green=Normal, Yellow=Alarm 1, Red=Alarm 2
• Large easy to read digital display
• Three power options: 115 VAC, 24 VDC, or 2 AA alkaline batteries
• Operates up to 1 year on one set of AA alkaline batteries
• Remote mount sensor cable available
• Compact wall mount design

Applications

• Iron and steel industry
• Laboratories
• Boiler rooms
• Garages and tunnels
• Vehicle service areas
• Engine testing
• Shipping / receiving docks
• Multi-occupancy residences

*Please note we can only ship RKI products to customers within the United States

73-1204-10-CSA EC-600 Indoor Carbon Monoxide Monitor, 0-150 ppm, 115 VAC Operation with 10 Meter Sensor Cable, CSA Version by RKI Instruments

RKI's Model EC-600 is an indoor, standalone monitor that detects Carbon Monoxide (CO) with a range of 0-150 ppm with 1 ppm increments. It's sleek, low-profile design is equipped with a unique tri-color display, which changes color as Carbon Monoxide levels reach each alarm level. It is capable of operating with three different power options; 115 VAC, 24 VDC or alkaline batteries. The EC-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord in its AC version. If Carbon Monoxide is present, the user is notified by an audible alarm tone and the multicolored LED digital display.

The EC-600 uses a fast responding low-cost plug-in style electrochemical sensor. This long life sensor is fieldreplaceable with no special tools required. The sensor can also be remotely mounted with an optional remote sensor cable.

Features

• Operates with or without a controller
• Tri-color visual alarm display: Green=Normal, Yellow=Alarm 1, Red=Alarm 2
• Large easy to read digital display
• Three power options: 115 VAC, 24 VDC, or 2 AA alkaline batteries
• Operates up to 1 year on one set of AA alkaline batteries
• Remote mount sensor cable available
• Compact wall mount design

Applications

• Iron and steel industry
• Laboratories
• Boiler rooms
• Garages and tunnels
• Vehicle service areas
• Engine testing
• Shipping / receiving docks
• Multi-occupancy residences

*Please note we can only ship RKI products to customers within the United States

73-1204-20 EC-600 Indoor Stand Alone Carbon Monoxide Monitor, 0-150 ppm, 115 VAC Operated, with 20 Meter Extender Cable by RKI Instruments

RKI's Model EC-600 is an indoor, standalone monitor that detects Carbon Monoxide (CO) with a range of 0-150 ppm with 1 ppm increments. It's sleek, low-profile design is equipped with a unique tri-color display, which changes color as Carbon Monoxide levels reach each alarm level. It is capable of operating with three different power options; 115 VAC, 24 VDC or alkaline batteries. The EC-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord in its AC version. If Carbon Monoxide is present, the user is notified by an audible alarm tone and the multicolored LED digital display.

The EC-600 uses a fast responding low-cost plug-in style electrochemical sensor. This long life sensor is fieldreplaceable with no special tools required. The sensor can also be remotely mounted with an optional remote sensor cable.

Features

• Operates with or without a controller
• Tri-color visual alarm display: Green=Normal, Yellow=Alarm 1, Red=Alarm 2
• Large easy to read digital display
• Three power options: 115 VAC, 24 VDC, or 2 AA alkaline batteries
• Operates up to 1 year on one set of AA alkaline batteries
• Remote mount sensor cable available
• Compact wall mount design

Applications

• Iron and steel industry
• Laboratories
• Boiler rooms
• Garages and tunnels
• Vehicle service areas
• Engine testing
• Shipping / receiving docks
• Multi-occupancy residences

*Please note we can only ship RKI products to customers within the United States

73-1204-20-CSA EC-600 Indoor Carbon Monoxide Monitor, 0-150 ppm, 115 VAC Operation with 20 Meter Sensor Cable, CSA Version by RKI Instruments

RKI's Model EC-600 is an indoor, standalone monitor that detects Carbon Monoxide (CO) with a range of 0-150 ppm with 1 ppm increments. It's sleek, low-profile design is equipped with a unique tri-color display, which changes color as Carbon Monoxide levels reach each alarm level. It is capable of operating with three different power options; 115 VAC, 24 VDC or alkaline batteries. The EC-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord in its AC version. If Carbon Monoxide is present, the user is notified by an audible alarm tone and the multicolored LED digital display.

The EC-600 uses a fast responding low-cost plug-in style electrochemical sensor. This long life sensor is fieldreplaceable with no special tools required. The sensor can also be remotely mounted with an optional remote sensor cable.

Features

• Operates with or without a controller
• Tri-color visual alarm display: Green=Normal, Yellow=Alarm 1, Red=Alarm 2
• Large easy to read digital display
• Three power options: 115 VAC, 24 VDC, or 2 AA alkaline batteries
• Operates up to 1 year on one set of AA alkaline batteries
• Remote mount sensor cable available
• Compact wall mount design

Applications

• Iron and steel industry
• Laboratories
• Boiler rooms
• Garages and tunnels
• Vehicle service areas
• Engine testing
• Shipping / receiving docks
• Multi-occupancy residences

*Please note we can only ship RKI products to customers within the United States

73-1205-05K RI-600 Stand Alone Carbon Dioxide Monitor, 0-5000 ppm, 24 VDC operation by RKI Instruments

RKI's Model RI-600 measures carbon dioxide in the air. The RI-600 displays the measured carbon dioxide concentration on the LCD. The monitor outputs an analog 4~20mA signal and outputs gas alarm relay contacts open or close when the carbon dioxide concentration rises over preset alarm set point.

The Model RI-600 applies Non-Dispersive Infrared Ray Absorption (NDIR) technique to detect a target gas. The infrared beam emitted from the light source passes through the gas cell and reaches the IR sensor. The target gas enters into the gas cell from the gas inlet. When the target gas is entered into the gas cell, the amount of infrared energy received by the IR sensor decreases since the infrared energy emitted from IR source is absorbed by the target gas. This decreased amount is detected by the IR sensor and is displayed as a gas concentration. There is an optical band pass filter in front of the IR sensor which can pass the absorption wave length of CO₂. Power options are 115 VAC or 24 VDC.

The RI-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord. If a high level of CO₂ is present, the user is notified by an audible alarm tone and the multicolored LCD digital display.

Features

• Operates with or without a controller
• Long life IR sensor
• Large easy to read digital display
• Two power options: 115 VAC, 24 VDC
• Compact wall mount design
• Tri-color visual alarm display: Green for Norman; Yellow for Alarm 1; Red for Alarm 2

Applications

• Brewing Tanks
• Filler Machines
• Storage Tanks
• Bag & Box Rooms
• Indoor Air Quality
• Greenhouse
• Underground Car Park

*Please note we can only ship RKI products to customers within the United States

73-1205-10K RI-600 Stand Alone Carbon Dioxide Monitor, 0-10,000 ppm, 24 VDC operation by RKI Instruments

RKI's Model RI-600 measures carbon dioxide in the air. The RI-600 displays the measured carbon dioxide concentration on the LCD. The monitor outputs an analog 4~20mA signal and outputs gas alarm relay contacts open or close when the carbon dioxide concentration rises over preset alarm set point.

The Model RI-600 applies Non-Dispersive Infrared Ray Absorption (NDIR) technique to detect a target gas. The infrared beam emitted from the light source passes through the gas cell and reaches the IR sensor. The target gas enters into the gas cell from the gas inlet. When the target gas is entered into the gas cell, the amount of infrared energy received by the IR sensor decreases since the infrared energy emitted from IR source is absorbed by the target gas. This decreased amount is detected by the IR sensor and is displayed as a gas concentration. There is an optical band pass filter in front of the IR sensor which can pass the absorption wave length of CO₂. Power options are 115 VAC or 24 VDC.

The RI-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord. If a high level of CO₂ is present, the user is notified by an audible alarm tone and the multicolored LCD digital display.

Features

• Operates with or without a controller
• Long life IR sensor
• Large easy to read digital display
• Two power options: 115 VAC, 24 VDC
• Compact wall mount design
• Tri-color visual alarm display: Green for Norman; Yellow for Alarm 1; Red for Alarm 2

Applications

• Brewing Tanks
• Filler Machines
• Storage Tanks
• Bag & Box Rooms
• Indoor Air Quality
• Greenhouse
• Underground Car Park

*Please note we can only ship RKI products to customers within the United States

73-1205-20K RI-600 Stand Alone Carbon Dioxide Monitor, 0-2.00%, 24 VDC operation by RKI Instruments

RKI's Model RI-600 measures carbon dioxide in the air. The RI-600 displays the measured carbon dioxide concentration on the LCD. The monitor outputs an analog 4~20mA signal and outputs gas alarm relay contacts open or close when the carbon dioxide concentration rises over preset alarm set point.

The Model RI-600 applies Non-Dispersive Infrared Ray Absorption (NDIR) technique to detect a target gas. The infrared beam emitted from the light source passes through the gas cell and reaches the IR sensor. The target gas enters into the gas cell from the gas inlet. When the target gas is entered into the gas cell, the amount of infrared energy received by the IR sensor decreases since the infrared energy emitted from IR source is absorbed by the target gas. This decreased amount is detected by the IR sensor and is displayed as a gas concentration. There is an optical band pass filter in front of the IR sensor which can pass the absorption wave length of CO₂. Power options are 115 VAC or 24 VDC.

The RI-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord. If a high level of CO₂ is present, the user is notified by an audible alarm tone and the multicolored LCD digital display.

Features

• Operates with or without a controller
• Long life IR sensor
• Large easy to read digital display
• Two power options: 115 VAC, 24 VDC
• Compact wall mount design
• Tri-color visual alarm display: Green for Norman; Yellow for Alarm 1; Red for Alarm 2

Applications

• Brewing Tanks
• Filler Machines
• Storage Tanks
• Bag & Box Rooms
• Indoor Air Quality
• Greenhouse
• Underground Car Park

*Please note we can only ship RKI products to customers within the United States

73-1205-50K RI-600 Stand Alone Carbon Dioxide Monitor, 0-5.00%, 24 VDC Operation by RKI Instruments

RKI's Model RI-600 measures carbon dioxide in the air. The RI-600 displays the measured carbon dioxide concentration on the LCD. The monitor outputs an analog 4~20mA signal and outputs gas alarm relay contacts open or close when the carbon dioxide concentration rises over preset alarm set point.

The Model RI-600 applies Non-Dispersive Infrared Ray Absorption (NDIR) technique to detect a target gas. The infrared beam emitted from the light source passes through the gas cell and reaches the IR sensor. The target gas enters into the gas cell from the gas inlet. When the target gas is entered into the gas cell, the amount of infrared energy received by the IR sensor decreases since the infrared energy emitted from IR source is absorbed by the target gas. This decreased amount is detected by the IR sensor and is displayed as a gas concentration. There is an optical band pass filter in front of the IR sensor which can pass the absorption wave length of CO₂. Power options are 115 VAC or 24 VDC.

The RI-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord. If a high level of CO₂ is present, the user is notified by an audible alarm tone and the multicolored LCD digital display.

Features

• Operates with or without a controller
• Long life IR sensor
• Large easy to read digital display
• Two power options: 115 VAC, 24 VDC
• Compact wall mount design
• Tri-color visual alarm display: Green for Norman; Yellow for Alarm 1; Red for Alarm 2

Applications

• Brewing Tanks
• Filler Machines
• Storage Tanks
• Bag & Box Rooms
• Indoor Air Quality
• Greenhouse
• Underground Car Park

*Please note we can only ship RKI products to customers within the United States

73-1206-02K RI-600 Stand Alone Carbon Dioxide Monitor, 0-2000 ppm, 115 VAC operation by RKI Instruments

RKI's Model RI-600 measures carbon dioxide in the air. The RI-600 displays the measured carbon dioxide concentration on the LCD. The monitor outputs an analog 4~20mA signal and outputs gas alarm relay contacts open or close when the carbon dioxide concentration rises over preset alarm set point.

The Model RI-600 applies Non-Dispersive Infrared Ray Absorption (NDIR) technique to detect a target gas. The infrared beam emitted from the light source passes through the gas cell and reaches the IR sensor. The target gas enters into the gas cell from the gas inlet. When the target gas is entered into the gas cell, the amount of infrared energy received by the IR sensor decreases since the infrared energy emitted from IR source is absorbed by the target gas. This decreased amount is detected by the IR sensor and is displayed as a gas concentration. There is an optical band pass filter in front of the IR sensor which can pass the absorption wave length of CO₂. Power options are 115 VAC or 24 VDC.

The RI-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord. If a high level of CO₂ is present, the user is notified by an audible alarm tone and the multicolored LCD digital display.

Features

• Operates with or without a controller
• Long life IR sensor
• Large easy to read digital display
• Two power options: 115 VAC, 24 VDC
• Compact wall mount design
• Tri-color visual alarm display: Green for Norman; Yellow for Alarm 1; Red for Alarm 2

Applications

• Brewing Tanks
• Filler Machines
• Storage Tanks
• Bag & Box Rooms
• Indoor Air Quality
• Greenhouse
• Underground Car Park

*Please note we can only ship RKI products to customers within the United States

73-1206-05K RI-600 Stand Alone Carbon Dioxide Monitor, 0-5000 ppm, 115 VAC operation by RKI Instruments

RKI's Model RI-600 measures carbon dioxide in the air. The RI-600 displays the measured carbon dioxide concentration on the LCD. The monitor outputs an analog 4~20mA signal and outputs gas alarm relay contacts open or close when the carbon dioxide concentration rises over preset alarm set point.

The Model RI-600 applies Non-Dispersive Infrared Ray Absorption (NDIR) technique to detect a target gas. The infrared beam emitted from the light source passes through the gas cell and reaches the IR sensor. The target gas enters into the gas cell from the gas inlet. When the target gas is entered into the gas cell, the amount of infrared energy received by the IR sensor decreases since the infrared energy emitted from IR source is absorbed by the target gas. This decreased amount is detected by the IR sensor and is displayed as a gas concentration. There is an optical band pass filter in front of the IR sensor which can pass the absorption wave length of CO₂. Power options are 115 VAC or 24 VDC.

The RI-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord. If a high level of CO₂ is present, the user is notified by an audible alarm tone and the multicolored LCD digital display.

Features

• Operates with or without a controller
• Long life IR sensor
• Large easy to read digital display
• Two power options: 115 VAC, 24 VDC
• Compact wall mount design
• Tri-color visual alarm display: Green for Norman; Yellow for Alarm 1; Red for Alarm 2

Applications

• Brewing Tanks
• Filler Machines
• Storage Tanks
• Bag & Box Rooms
• Indoor Air Quality
• Greenhouse
• Underground Car Park

*Please note we can only ship RKI products to customers within the United States

73-1206-10K RI-600 Stand Alone Carbon Dioxide Monitor, 0-10,000 ppm, 115 VAC Operation by RKI Instruments

RKI's Model RI-600 measures carbon dioxide in the air. The RI-600 displays the measured carbon dioxide concentration on the LCD. The monitor outputs an analog 4~20mA signal and outputs gas alarm relay contacts open or close when the carbon dioxide concentration rises over preset alarm set point.

The Model RI-600 applies Non-Dispersive Infrared Ray Absorption (NDIR) technique to detect a target gas. The infrared beam emitted from the light source passes through the gas cell and reaches the IR sensor. The target gas enters into the gas cell from the gas inlet. When the target gas is entered into the gas cell, the amount of infrared energy received by the IR sensor decreases since the infrared energy emitted from IR source is absorbed by the target gas. This decreased amount is detected by the IR sensor and is displayed as a gas concentration. There is an optical band pass filter in front of the IR sensor which can pass the absorption wave length of CO₂. Power options are 115 VAC or 24 VDC.

The RI-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord. If a high level of CO₂ is present, the user is notified by an audible alarm tone and the multicolored LCD digital display.

Features

• Operates with or without a controller
• Long life IR sensor
• Large easy to read digital display
• Two power options: 115 VAC, 24 VDC
• Compact wall mount design
• Tri-color visual alarm display: Green for Norman; Yellow for Alarm 1; Red for Alarm 2

Applications

• Brewing Tanks
• Filler Machines
• Storage Tanks
• Bag & Box Rooms
• Indoor Air Quality
• Greenhouse
• Underground Car Park

*Please note we can only ship RKI products to customers within the United States

73-1206-20K RI-600 Stand Alone Carbon Dioxide Monitor, 0-2.00%, 115 VAC operation by RKI Instruments

RKI's Model RI-600 measures carbon dioxide in the air. The RI-600 displays the measured carbon dioxide concentration on the LCD. The monitor outputs an analog 4~20mA signal and outputs gas alarm relay contacts open or close when the carbon dioxide concentration rises over preset alarm set point.

The Model RI-600 applies Non-Dispersive Infrared Ray Absorption (NDIR) technique to detect a target gas. The infrared beam emitted from the light source passes through the gas cell and reaches the IR sensor. The target gas enters into the gas cell from the gas inlet. When the target gas is entered into the gas cell, the amount of infrared energy received by the IR sensor decreases since the infrared energy emitted from IR source is absorbed by the target gas. This decreased amount is detected by the IR sensor and is displayed as a gas concentration. There is an optical band pass filter in front of the IR sensor which can pass the absorption wave length of CO₂. Power options are 115 VAC or 24 VDC.

The RI-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord. If a high level of CO₂ is present, the user is notified by an audible alarm tone and the multicolored LCD digital display.

Features

• Operates with or without a controller
• Long life IR sensor
• Large easy to read digital display
• Two power options: 115 VAC, 24 VDC
• Compact wall mount design
• Tri-color visual alarm display: Green for Norman; Yellow for Alarm 1; Red for Alarm 2

Applications

• Brewing Tanks
• Filler Machines
• Storage Tanks
• Bag & Box Rooms
• Indoor Air Quality
• Greenhouse
• Underground Car Park

*Please note we can only ship RKI products to customers within the United States

74-7464 MC-6400 Modbus Controller by RKI Instruments

The MC-6400 controller is a 64-channel gas monitoring controller that can communicate with up to 64 gas sensors or transmitters through an RS-485 Modbus communication. Four relays can be individually set up to the full scale gas reading and may be latching or non-latching. Used in conjunction with RKI s transmitters to create a safer working environment.

Features

• 64 Channel Wired Modbus Controller
• 12 to 35V DC Operating voltage with an optional AC power supply
• Operating temperature range of -40°C to +70°C
• Graphical LCD with LED backlight
• 5 Push-button interface (ADD, MENU, SUB, SCAN/HOLD and RESET/ESC)
• 4 configurable alarm set-points: Four front panel ALARM LED indicators (Red); 4 drycontact relays (4 amps maximum per relay)
• Status LEDs for power and fault: multi-color status light; Amber fault LED for indicating system faults
• Output options: Wet contact fault terminal, relay 4 can optionally be configured as a fault relay, RS-485 Modbus
• NEMA-4X weather, water, and chemical resistant enclosure
• 1-Year limited hardware warranty

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States