$1000 - $2000

Sperian Biosystems PhD6 Multigas Detector

The Biosystems PhD6 Multigas Detector is the latest development in compact multigas detection systems. The detector is proven to be compact, efficient, and cost effective. With dual alarm systems featuring ultra-loud audible indicators and ultra-bright LED visual indicators, users and those nearby are always notified when potential hazards may be present. When developing this detector, the engineers at SperianProtection Instrumentation also developed an express docking station that would reduce calibration time and labor costs. The detection and docking station help users meet record keeping requirements and reduce the risks of human error. With the SperianBiosystems PhD6 Multigas Detector, users can rest assured that they are receiving the very best in gas detection technology.

Key Features

The Biosystems PhD6 Multigas Detector is compatible with over 19 sensor choices including:

• PID
• IR-CO2
• IR-CH4
• Conventional LEL
• Oxygen
• 15 different toxic gas sensors

The gas detector is encased in a durable solid polycarbonate case with a rubber over mold for easy handling. It has an interchangeable battery pack with both Alkaline and Li-Ion rechargeable batteries. Both battery types offer up to 24 hour run times. The unit features dual audible alarms at 92 decibels and front and side ultra-bright LED visual alarms to ensure that the user and those nearby are always notified of possible hazardous conditions. For easy interpretation, the detector has an easy to read status bar and large LCD display that notifies users of the device s functionality and calibration due date. Using the menu options, users can easily adjust a variety of the instrument s settings.

Automatic Docking Station

When developing the PhD6 Multigas Detector, product developers also created an automatic docking station (Biosystems IQ6 Express Dock) to be fully compatible with the detector. The docking station aims to reduce labor time and costs by fully automating certain aspects of instrument maintenance including calibration, functionality testing, and record keeping. Using the Express Dock, users can maintain compliance with recordkeeping requirements by simply docking the detector in the station. The station will automatically perform a variety of operations without user intervention.

Sperian Protection Instrumentation and Honeywell

Sperian Protection Instrumentation is a global leader in personal safety equipment. The company was recently acquired by Honeywell, another global leader in technology and innovation. As a Fortune 100 company, Honeywell has a vested interest in maintaining its reputation as a developer of efficient and reliable safety equipment. Sperian Protection Instrumentation helps to expand Honeywell s personal safety offerings while advancing their position in the American market. By purchasing a product by Sperian and Honeywell, customers can be assured they are receiving the very best in safety technology and equipment.

VKX36MF-334-3-50 36" Versa-Kool Extreme High Velocity Misting Fan, 3-Phase, 50 Hz by Schaefer

The 36" Versa-Kool Extreme Circulation Fan is a compact, powerful air mover specifically designed to push high speed air streams over a long distance. The optional misting package provides a simple, highly effective and cost competitive means for outfitting large dairies with evaporative cooling solutions with minimal install time.

Features and Benefits

• Powerful 3/4 hp direct drive motor provides high airflow with an extended air pattern for excellent coverage
• High-density polyethylene housing for superior corrosion and moisture resistance, wide temperature range capability and high stress crack, wear and abrasion resistance
• Durable air straighteners made from 304 Stainless Steel for precisely directing airflow
• Matched thermally protected TEAO, 3-phase motors and blades for high performance and long life
• Misting option comes fully assembled with industry standard nozzles putting out over 32 gallons per hour per fan
• All misting components are tested and high pressure rated for 300+ psi supply pressure
• Misting package features tool free maintenance with simple twist-on components
• Ships fully or partially assembled based on customer needs

CX105-P CX105 Conductivity Transmitter 24V DC Loop-Powered by Sensorex

Our CX105 is an isolated output 4-20mA industrial transmitter for reading contacting Conductivity sensors, as well as TDS and Resistivity. Easily power the unit with available two-wire power supply loop. Ideal for connecting to a PLC for advanced control systems. Versatile mounting options for wall or panel mount. With a dual display LCD, monitoring both the measuring value and the temperature is simple.

The CX105 is CE certified.

Features:

• SHEETLarge LCD screen for easy reading
• Isolated 4-20 mA analog output
• Automatic temperature compensation
• Flexible mounting options

NANO-B2 Advantage NanoTron Boiler Controller with Non Temp Comp Probe, 1" Cross, Power Cord by Quantrol

Key Features

• Compact Design
• Simple Step Through Menu
• NEMA 4X Style Enclosure
• Raised Dome Keypad
• Non-Volatile Memory
• Water Meter Totalizer
• 2 Year Warranty
• Available Flow Switch
• Prewired Configuration

Application

The NanoTron is a compact, dual relay microprocessor-based controller with many standard features. NanoTron models are available to control conductivity and one selectable feed timer, or two independently programmable feed timers.

The NanoTron platform provides an economical option for conductivity control of a cooling tower, boiler, or other recirculating water system. Selectable feed timer options include: pulse, post bleed, with bleed, recycle, 28-day, batch and reminder.

SP-350 Flourometer, PTSA by Quantrol

Pyxis SP-300 series fluorometers measure the concentration of a fluorescent substance in a liquid sample. These fluorometers have a built-in sample cell and samples can be directly filled into the sample cell. SP-380, SP-395, and SP-400 are dual channel fluorometers. SP-380 measures PTSA and fluorescein. SP-395 measures halogenated azoles and naphthenic disulfonic acid (NDSA).

SP-400 measures PTSA (1,3,6,8-pyrenetetrasulfonic acid) and conductivity with patent pending technology to combine cutting edge optical measurement with electrochemical measurement in the same sample cell.

Major features of these fluorometers include:

• Extra color and turbidity parameters measured are used for automatic compensation to eliminate interference.
• No sample cuvette is needed and variations associated with the cuvette is eliminated.
• Large color graphic screen that can be read in direct sunlight.

VTS-L1232311101 Ventis MX4 Multi-Gas Monitor, LEL (Methane), CO, H2S, O2, Li-ion Extended Run Time Battery, Desktop Charger, Pump, Orange, UL/CSA, English by Industrial Scientific

The Ventis® MX4 is a four-gas monitor with the portability and size of a single-gas monitor. Eliminate the need for extra monitors and transition seamlessly from personal monitoring to confined space entry with the Ventis® Slide-on Pump— ideal for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries.

• Detect up to four gases with a wide range of sensor options
• Select alarm set points, set latch alarms, disable instrument shutdown while in alarm, and more
• Save time and reduce human error with maintenance and usage data available from iNet Control software
• Available with or without an integral pump, or with the Ventis Slide-on Pump for ultimate flexibility
• Non-pumped instruments compatible with 12-hour, 18-hour, or 20-hour batteries

The Ventis® Slide-on Pump

The Ventis® Slide-on Pump is ideally suited for operators who wear their gas monitors primarily for personal protection but occasionally require a pump for confined space entries. Available in black or safety orange and powered by its own battery, the slide-on pump is compatible with the Ventis MX4 and Ventis® Pro5 Multi-Gas Monitor.

• Convenient Sampling – Sample draw distance of up to 50 feet provides convenient sampling in a wide range of applications
• Easy to Attach – No tools are required to attach or remove the Ventis Slide-on Pump to or from the monitor
• Uses Same Batterys and Chargers as Ventis – Monitor and pump each use the same batterys, and can easily be exchanged between instruments
• Flexible Battery Options – Three available battery options make this pump extremely flexible in the field

R63303 FPS COM 5000 P18 Waris connection & cable by Draeger

In an emergency, there is no time for misunderstanding. That's why Draeger developed the FPS-COM 5000 communication unit for NFPA-certified SCBAs. Designed to connect seamlessly to the Draeger FPS® 7000 full-face masks, this proven communication unit ensures clear communication through either a tactical voice amplifier or a radio – even in extreme conditions.

Only your voice is heard

The Draeger FPS-COM 5000 allows you to communicate without interference, even in the noisiest environments. Digital noise-reduction technology eliminates breathing sounds, ambient noise, and acoustic feedback for crystal-clear communication. In addition, the earpiece fits closely to the ear using has a flexible gooseneck that easily adapts to different head sizes and shapes.

Dual side speakers for amplified sound toward the listener

Two speakers mounted on the sides of the Draeger FPS-COM 5000 point in the direction the wearer faces for more effective communication. Speakers are flush mounted to reduce snag hazard and improve balance.

Access to different communication radios

You can use the attached jack to connect the FPS-COM 5000 to more than 350 different radio sets via the external Draeger C-C440 push-to-talk button or the Draeger C-C550 remote speaker microphone. Or you can connect the FPS-COM 5000 directly to the radio and use the built-in push-to-talk button. The communication unit also offers Bluetooth connection to selected radios, including Motorola APX™.

High reliability, low costs

Forgot to turn off the FPS-COM 5000 after a shift? No problem. After a pre-alarm, the communication unit shuts off automatically if no breathing sounds are detected after ten minutes. This increases the battery life, lowers maintenance costs, and ensures that equipment is ready for use when it's needed.

Assembly without special tools

With Draeger's new click-lock system, the FPS-COM 5000 can be attached and removed in just a few steps. And because the FPS-COM 5000 is protected against ingress of water or humidity with an IP67 rating, there is no need to remove the unit for cleaning of the mask.

R63305 FPS COM 5000 P18 Gcai connection & cable by Draeger

In an emergency, there is no time for misunderstanding. That's why Draeger developed the FPS-COM 5000 communication unit for NFPA-certified SCBAs. Designed to connect seamlessly to the Draeger FPS® 7000 full-face masks, this proven communication unit ensures clear communication through either a tactical voice amplifier or a radio – even in extreme conditions.

Only your voice is heard

The Draeger FPS-COM 5000 allows you to communicate without interference, even in the noisiest environments. Digital noise-reduction technology eliminates breathing sounds, ambient noise, and acoustic feedback for crystal-clear communication. In addition, the earpiece fits closely to the ear using has a flexible gooseneck that easily adapts to different head sizes and shapes.

Dual side speakers for amplified sound toward the listener

Two speakers mounted on the sides of the Draeger FPS-COM 5000 point in the direction the wearer faces for more effective communication. Speakers are flush mounted to reduce snag hazard and improve balance.

Access to different communication radios

You can use the attached jack to connect the FPS-COM 5000 to more than 350 different radio sets via the external Draeger C-C440 push-to-talk button or the Draeger C-C550 remote speaker microphone. Or you can connect the FPS-COM 5000 directly to the radio and use the built-in push-to-talk button. The communication unit also offers Bluetooth connection to selected radios, including Motorola APX™.

High reliability, low costs

Forgot to turn off the FPS-COM 5000 after a shift? No problem. After a pre-alarm, the communication unit shuts off automatically if no breathing sounds are detected after ten minutes. This increases the battery life, lowers maintenance costs, and ensures that equipment is ready for use when it's needed.

Assembly without special tools

With Draeger's new click-lock system, the FPS-COM 5000 can be attached and removed in just a few steps. And because the FPS-COM 5000 is protected against ingress of water or humidity with an IP67 rating, there is no need to remove the unit for cleaning of the mask.

ECFX-200-AS Manning EC-FX Gas Detector, NH3 0/200ppm ATMOS Stainless Steel Enclosure by Honeywell Analytics

If you use ammonia as part of your refrigeration process, you face several challenges in protecting your plant from the danger and expense of ammonia leaks within cold storage, refrigerated process areas and the engine rooms. Introducing a better, tougher, longer-lasting sensor to cover your needs. The EC-FX-NH3 maintains sensitivity and accuracy — even with rapid changes in temperature and humidity.

Now one tough sensor can work in three harsh environments. With the stability you can count and low cost you want, the EC-FX-NH3 is the new gold standard in ammonia detection.

Features & Benefits

• Responds quickly to ammonia concentrations in low parts per million (PPM)
• Rugged construction for long-term reliability
• ATMOSTM Technology for environmental flexibility

Quick Specs

• Stainless steel enclosure with LCD options
• All-new ammonia sensor with a proprietary electrolyte
• 3-year warranty—twice the warranty of most sensors

VKO36-O 36" Versa-Kool Mobile Oscillating Fan, OSHA Guards by Schaefer

Schaefer Versa-Kool® mobile drum fans are the portable solution for moving large amounts of air at higher velocities. Designed with "Schaefer-Tough" polyethylene housing and rugged base for impact resistance and to withstand the elements, the fan is ideal for portable personal comfort or livestock and equipment cooling needs in any industrial, commercial or agricultural facility.

Features and Benefits:

• OSHA compliant guards
• Incredibly quiet for its size and performance levels
• Extremely high airflow and air throw, rated up to 18,000+ cfm
• Single and two-speed models available
• UL approved power cord included
• Stacking on OSHA compliant models, excluding 24" models
• Two year warranty
• Made in the USA

In addition, VKM models feature:

• Rubber wheels designed in-line with housing
• Galvanized steel base for complete corrosion resistance inside and out
• Narrow fan profile with ergonomic pull handle and integrated base assembly handles
• Stacking capability up to four fans high

2106B1713 Sensepoint Hazardous Area Approved Gas Detector, NH3 0-50 ppm Toxic Sensor 3/4NPT by Honeywell Analytics

The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

Fit For Purpose

• Flammable, toxic and Oxygen versions available
• High performance, low cost
• Suitable for new and retro fit applications

Proven Sensor Technology

• Surecell™ electrochemical sensors
• Poison resistant catalytic bead
• Fast and reliable
• Typical 2 to 5 years operational life

ATEX/IECEx Certified

• Complies with the latest standards
• Hazardous area approval and performance
• IP65/67 for use in harsh environments

Easy to Use

• Factory set operation
• Simple to replace
• Minimal training required

Range of Accessories

• Weatherproof cap
• Flow adaptor
• Duct mounting kit
• Collecting cone

R63307 FPS COM 5000 P18 Bluetooth Motorola APX by Draeger

In an emergency, there is no time for misunderstanding. That's why Draeger developed the FPS-COM 5000 communication unit for NFPA-certified SCBAs. Designed to connect seamlessly to the Draeger FPS® 7000 full-face masks, this proven communication unit ensures clear communication through either a tactical voice amplifier or a radio – even in extreme conditions.

Only your voice is heard

The Draeger FPS-COM 5000 allows you to communicate without interference, even in the noisiest environments. Digital noise-reduction technology eliminates breathing sounds, ambient noise, and acoustic feedback for crystal-clear communication. In addition, the earpiece fits closely to the ear using has a flexible gooseneck that easily adapts to different head sizes and shapes.

Dual side speakers for amplified sound toward the listener

Two speakers mounted on the sides of the Draeger FPS-COM 5000 point in the direction the wearer faces for more effective communication. Speakers are flush mounted to reduce snag hazard and improve balance.

Access to different communication radios

You can use the attached jack to connect the FPS-COM 5000 to more than 350 different radio sets via the external Draeger C-C440 push-to-talk button or the Draeger C-C550 remote speaker microphone. Or you can connect the FPS-COM 5000 directly to the radio and use the built-in push-to-talk button. The communication unit also offers Bluetooth connection to selected radios, including Motorola APX™.

High reliability, low costs

Forgot to turn off the FPS-COM 5000 after a shift? No problem. After a pre-alarm, the communication unit shuts off automatically if no breathing sounds are detected after ten minutes. This increases the battery life, lowers maintenance costs, and ensures that equipment is ready for use when it's needed.

Assembly without special tools

With Draeger's new click-lock system, the FPS-COM 5000 can be attached and removed in just a few steps. And because the FPS-COM 5000 is protected against ingress of water or humidity with an IP67 rating, there is no need to remove the unit for cleaning of the mask.

ECFX-250-ALS Manning EC-FX Gas Detector, NH3 0/250ppm ATMOS LCD Stainless Steel Enclosure by Honeywell Analytics

If you use ammonia as part of your refrigeration process, you face several challenges in protecting your plant from the danger and expense of ammonia leaks within cold storage, refrigerated process areas and the engine rooms. Introducing a better, tougher, longer-lasting sensor to cover your needs. The EC-FX-NH3 maintains sensitivity and accuracy — even with rapid changes in temperature and humidity.

Now one tough sensor can work in three harsh environments. With the stability you can count and low cost you want, the EC-FX-NH3 is the new gold standard in ammonia detection.

Features & Benefits

• Responds quickly to ammonia concentrations in low parts per million (PPM)
• Rugged construction for long-term reliability
• ATMOSTM Technology for environmental flexibility

Quick Specs

• Stainless steel enclosure with LCD options
• All-new ammonia sensor with a proprietary electrolyte
• 3-year warranty—twice the warranty of most sensors