$1000 - $2000

CC22-771 CC 22 Series Fixed Transmitter with Carbon Monoxide (CO) Sensor, 0 - 100% LEL Range, No Display / 4-20 mA by GfG

Are you looking for an innovative and cost-effective transmitter for combustible gases, but without the need for explosion protection? Then a GfG 22 series transmitter is the right choice.

Time-proven and innovative

The CC 22 works according to the heat of reaction principle, a proven method for measuring combustible gases. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow-up costs are minimized thanks to the long lifespan of the sensors.

Universal signal transmission

Either an analog or digital output signal can be transmitted by the CC 22 by means of a Modbus interface. Due to the different types of signal transmission, a 22 series transmitter can be connected to almost any gas detection system, also as an extra measuring point or as a replacement transmitter on existing systems.

Signal processing

The embedded software of the CC 22 linearises the measuring signal and compensates for the effects of temperature. As a result, correct readings are transmitted even with weather related fluctuations in temperature. The software allows problems to be detected, and the Modbus version also indicates any required service or maintenance work.

Weather protection

A weatherproof housing not only protects transmitters against exposure to wind and weather, but also against contamination and excessive temperatures caused by direct sunlight.

Optional colored graphic display

The clear graphic display of the CC 22 is self explanatory and allows you to read off the current status and other important information with ease. The display enables you to navigate effortlessly through the unit's concise menu and to change settings or even calibrate, depending on your user authorization. In the event of an alarm, the display will turn red.

Operation buttons

The buttons on the transmitter allow the unit to be calibrated and settings to be adjusted through the menu as needed.

The application areas of the dust and water-protected structure range from production and storage areas to disposal sites, biogas plants, mines and oil rigs.

Calibration adapter

In order to perform regular bump tests, a calibration adapter is used on the transmitter, which ensures a uniform and secure supply of gas.

Easy and convenient service

GfG offers full after-the-sale commissioning and field service support.

Features

• Uses the catalytic combustion principle
• Long service life of the sensors
• High efficiency and low follow-up costs
• Sturdy plastic housing (IP 54)
• Cost effective single-man adjustment
• Affordable solution for many measuring tasks

ECFX-1000-LN Manning EC-FX Gas Detector, NH3 0/1000 ppm, LCD, NEMA 1 Enclosure by Honeywell Analytics

If you use ammonia as part of your refrigeration process, you face several challenges in protecting your plant from the danger and expense of ammonia leaks within cold storage, refrigerated process areas and the engine rooms. Introducing a better, tougher, longer-lasting sensor to cover your needs. The EC-FX-NH3 maintains sensitivity and accuracy — even with rapid changes in temperature and humidity.

Now one tough sensor can work in three harsh environments. With the stability you can count and low cost you want, the EC-FX-NH3 is the new gold standard in ammonia detection.

Features & Benefits

• Responds quickly to ammonia concentrations in low parts per million (PPM)
• Rugged construction for long-term reliability
• ATMOSTM Technology for environmental flexibility

Quick Specs

• Stainless steel enclosure with LCD options
• All-new ammonia sensor with a proprietary electrolyte
• 3-year warranty—twice the warranty of most sensors

IR22-804-D IR 22 Fixed Transmitter with Carbon Dioxide (CO₂) Sensor, 0 - 5% vol. Range, Display / 4-20 mA by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO₂ or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

• Long service life of the infrared (NDIR) sensor
• Extremely stable, low maintenance
• Cost effective single-man adjustment
• Output 4-20 mA or RS485 Modbus

0577 0400 400 IAQ Data Logger for Long Time Measurement by Testo

The IAQ data logger is an autonomous measuring unit for long-term measurements with the testo 400. The universal IAQ instrument is used for programming measuring interval and time. During the measurement, the IAQ data logger works independently from the measuring instrument. In the meantime, the testo 400 can be used for measurements elsewhere. Once the IAQ measurement is completed, you can read out, analyze and document all the saved values with the testo 400.

Main applications of the IAQ data logger in combination with the appropriate probes:

• PMV/PPD measurement in accordance with EN ISO 7730 / ASHRAE 55
• Local discomfort level measurement in accordance with EN ISO 7730 / ASHRAE 55, e.g. draught rate and degree of turbulence at up to three positions at the same time
• NET measurement in accordance with DIN 33403

A practical tripod is available as an accessory for mounting logger and probes.

• Stand-alone data logger for long-term measurements up to 2 weeks
• Compatible with probes for measuring comfort level, degree of turbulence, radiant heat, CO₂, CO, illuminance, air flow velocity, humidity and temperature
• Connect up to six fixed cable probes at the same time
• Analysis and archiving of measurement data with testo DataControl PC software
• Practical tripod for mounting data logger and probes as an accessory

65-2396RK-03 S2 Series IR Carbon Dioxide (CO2) 0 - 5% Sensor/Transmitter, Explosion with Proof J-Box, UL Version by RKI Instruments

Having a reliable gas sensor is detrimental to the safety and security of workers in potentially unstable work environments. In many cases, the decision to use a gas detection device with a reliable sensor can be the difference between life and death. RKI Instruments understands the reliability of gas sensors should be a top priority for workplace safety managers. Their team of experts works diligently to incorporate the most advanced technologies with the highest industry standards.

For nearly 20 years, RKI Instruments has worked in the gas detection industry. Its line of products leads the industry in innovation and technology. Every year, the company commits to achieving a higher level of productivity and delivering the best gas detection products on the market. With the introduction of their high performing, low cost S2 Sensor Transmitter, RKI is fulfilling that commitment.

S2 Sensor/Transmitter

The RKI S2 Sensors and Transmitters use state of the art sensor technology to detect common gas hazards. Their efficient design and cost effectiveness make them an industry choice for atmospheric monitoring. The sensor transmitters can be used in both indoor and outdoor conditions and are designed to interface with RKI controllers or PLC/DCS systems.

The sensors are available in explosion proof casing for monitoring LEL, H2 specific, oxygen, H2S, CO2, and carbon monoxide. These sensors also have flame arrestors and are approved for use in hazardous environments. The oxygen, H2S, CO, and CO2 sensors are available in non-explosion proof models. The sensors provide highly specific and quick detection and are long lasting. The sensors can be quickly replaced while on the field and do not require any tools.

Explosion proof S2 Sensor/Transmitter

The explosion proof sensors use a variety of detection mechanisms including catalytic for LEL and LEL- H2 specific; metal oxide semiconductor for hydrogen; galvanic cell technology for oxygen; electrochemical for hydrogen sulfide and carbon monoxide; and infrared for carbon dioxide, methane, and hydrocarbons. A hydrogen specific sensor transmitter is not available. Each of these detection methods come with their own measuring range specifications and response times varying from 20 seconds to 45 seconds. These sensors are stainless steel and are housed in a cast aluminum explosion proof J-Box (a stainless steel J-Box is also available).

Non-explosion proof S2 Sensor/Transmitter

The non-explosion proof sensors use galvanic cells for oxygen detection; electrochemical technology for hydrogen sulfide, carbon monoxide, and other toxics; and infrared technology for carbon dioxide detection. The response times vary between 20 seconds and 60 seconds depending on the targeted gas, and the measuring ranges vary as well. These sensors are plastic or aluminum and housed in an explosion proof J-Box.

Accessories

The S2 Sensor/Transmitter has numerous accessories available to meet the individual workplace's needs. Such accessories include calibration adaptors, flow through adaptors, remote horns and lights, calibration kits, battery backups, splash guards, air aspirator adaptors or panels, and data loggers.

Each sensor comes standard with a one year warranty for materials and workmanship.

*Please note we can only ship RKI products to customers within the United States

6702-8030 MGS-401 Entrance Monitor by Bacharach

The MSA Bacharach® MGS-401 Entrance Monitor centralizes the status of up to four (4) MSA Bacharach diff usion Gas Detectors, which in turn provides and audible and visual alarm outside a monitored space. In addition, the MGS-401 displays any gas concentration level in the space for additional information and visual monitoring. System configuration will determine whether the alarms signals are addressed in the monitored space or at a controller or BMS/BAS level. Combining the MGS-401 Entrance Monitor with the MGS-408 Gas Controller and diffusion Gas Detectors provides a complete, single source gas detection system with an easy means of achieving compliance with refrigeration safety standards such as IIAR, ASHRAE 15, CSA B52 and EN376.

FEATURES

• Perimeter strobe for "at-a-glance" system / alarm status
• Seamless integration with all MSA Bacharach diffusion Gas Detectors
• MGS-408 Controller powers up to (8) total of combination of MGS-401(s) and MGS Diffusion Gas Detectors
• Modbus RTU Master / Slave provides seamless integration from connected gas detectors to many third-party BMS / BAS
• Audible and visual alarms enable compliance with IIAR, ASHRAE 15, CSA B52 and EN378 - no additional hardware required

CC22-701-DM CC 22 Series Fixed Transmitter with Methane (CH₄) Sensor, 0 - 100% LEL Range, Display / Modbus by GfG

Are you looking for an innovative and cost-effective transmitter for combustible gases, but without the need for explosion protection? Then a GfG 22 series transmitter is the right choice.

Time-proven and innovative

The CC 22 works according to the heat of reaction principle, a proven method for measuring combustible gases. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow-up costs are minimized thanks to the long lifespan of the sensors.

Universal signal transmission

Either an analog or digital output signal can be transmitted by the CC 22 by means of a Modbus interface. Due to the different types of signal transmission, a 22 series transmitter can be connected to almost any gas detection system, also as an extra measuring point or as a replacement transmitter on existing systems.

Signal processing

The embedded software of the CC 22 linearises the measuring signal and compensates for the effects of temperature. As a result, correct readings are transmitted even with weather related fluctuations in temperature. The software allows problems to be detected, and the Modbus version also indicates any required service or maintenance work.

Weather protection

A weatherproof housing not only protects transmitters against exposure to wind and weather, but also against contamination and excessive temperatures caused by direct sunlight.

Optional colored graphic display

The clear graphic display of the CC 22 is self explanatory and allows you to read off the current status and other important information with ease. The display enables you to navigate effortlessly through the unit's concise menu and to change settings or even calibrate, depending on your user authorization. In the event of an alarm, the display will turn red.

Operation buttons

The buttons on the transmitter allow the unit to be calibrated and settings to be adjusted through the menu as needed.

The application areas of the dust and water-protected structure range from production and storage areas to disposal sites, biogas plants, mines and oil rigs.

Calibration adapter

In order to perform regular bump tests, a calibration adapter is used on the transmitter, which ensures a uniform and secure supply of gas.

Easy and convenient service

GfG offers full after-the-sale commissioning and field service support.

Features

• Uses the catalytic combustion principle
• Long service life of the sensors
• High efficiency and low follow-up costs
• Sturdy plastic housing (IP 54)
• Cost effective single-man adjustment
• Affordable solution for many measuring tasks

EC22-725-D EC 22 Fixed Transmitter, Chlorine (Cl2) MK 390-0, 0 - 50 ppm, Display / 4-20 mA by GfG

The EC 22 Series are innovative and cost-effective transmitters for the detection of toxic gases or oxygen levels, but without the need for explosion protection.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Universal signal transmission

Either an analog or digital output signal can be transmitted by the EC 22 by means of a Modbus interface. Due to the different types of signal transmission, a transmitter from the 22 series can be connected to almost any gas detecting system, also as a supplementary or replacement transmitter on existing systems.

Signal processing

The embedded software of the EC 22 linearizes the measuring signal and compensates for the effects of temperature. As a result, correct readings are transmitted even with weather related fluctuations in temperature. In addition, the transmitter also offers the option of transmitting service, maintenance, and error messages to a connected gas measuring computer.

Weather protection

A weatherproof housing not only protects transmitters against exposure to wind and weather, but also against contamination and excessive temperatures caused by direct sunlight.

Optional colored graphic display and horn

The clear graphic display of the EC 22 is self explanatory and allows you to read the current status and other important information with ease. The display enables you to navigate effortlessly through the unit s concise menu and to change settings or even calibrate, depending on your user authorization. In the event of an alarm the display changes color from green to red. Two LEDs indicate the status.

Operation buttons

The buttons on the transmitter allow the unit to be calibrated and settings to be adjusted through the menu as needed.

Calibration adapter

In order to perform regular bump tests, a calibration adapter is used on the transmitter, which ensures a uniform and secure supply of gas.

Easy and convenient service

GfG offers full after-the-sale commissioning and field service support.

Features

• Long service life of the sensors
• High efficiency and low follow-up costs
• Sturdy plastic housing (IP-54)
• Cost effective single-man adjustment
• Affordable solution for many measuring tasks

*Please note we can only ship RKI products to customers within the United States

M-700137 Manning AirScan IRF9 Transmitter, R22-0/1000-COM, R22 0/1,000 ppm, Commercial Enclosure by Honeywell Analytics

The industrial refrigeration industry is changing rapidly. The manufacture of R-22 and other HCFCs are being phased out. Influential organizations such as EPA and CARB (California Air Resources Board) are enforcing lower level monitoring requirements. Manufacturers of cooling systems are introducing new equipment that runs on 407a, 422d, 410a, HFO-1234yf, NH3 and CO2. In step with these changes, EPA fines have escalated for anyone venting ozone-depleting gases. What's your best move? Contact Honeywell Analytics to learn how to detect for these new refrigerants. With Honeywell Analytics, you can green the environment—and green your bottom line.

Honeywell Analytics Infrared monitoring solutions are designed to help your plant operate more efficiently and cost effectively. Unlike sample draw systems which take longer to pinpoint a gas leak, our diffusion sensing technology cuts downtime and the cost of expensive refrigerant replacement. Other technological advantages include flexible standalone or networkable configurations, long operating life expectancy (10+ years); fewer calibration requirements; self-monitoring SensorCheck technology; EPA compliance including newer requirements set by CARB (California Air Resources Board); and accurate, reliable response to the most common refrigerant gases used in industrial or commercial processes.

Refrigerant Specific

• Rapid response to refrigerants including R-404a, R-22, R-507a, R-134a, R-407a, R-410a, R-422d, HFO-1234yf, NH3 and CO2
• Internal monitoring of 4/20 mA loop circuitry continuously
• Compliant with new monitoring standards set by CARB

Diffusion-Design Sensor

• Has no moving parts and doesn't require pumps or filters
• All points of detection can be monitored continuously at an affordable cost

Versatility

• Can be used with any Honeywell Analytics readout
• Standard range of 0-3,000 ppm, can be rescaled for lower trip points
• Provides a linear output of 4/20 mA as a function of refrigerant concentration
• Simple, real-time calibration eliminates maintenance downtime
• Automatically adapts to fluctuating temperatures

Long-Lasting Performance

• Unique internal reference channel compensates for dust particles, source degradation, humidity and temperature fluctuation, food odors, chemical cleaners, etc.

ATMOS™ Technology

• Allows for operation down to -60°F and in condensing humidity environments or during washdown
• Automatically adapts to its environment and provides accurate and reliable performance under the harshest conditions

SensorCheck™ Technology

• Checks operating parameters of sensors and sends a notification output signal if an anomaly is identified
• Tests the sensor every 24 hours for electrical viability
• Indication can be detected by a Manning gas monitor or PLC

Housing

• High-mass metal bench provides structural and thermal stability and greater immunity to vibration
• Superior EMI/RFI shielding

Applications

• Banana and Produce Rooms
• Beverage Plants
• Wineries and Breweries
• Confined Space Entry
• Food Processing
• Gas Bottling Plants
• Ice Rinks
• Product Coolers
• Rack Houses
• Refrigeration Systems
• Supermarkets

Scintillation Probe - 1.0'' x 0.040' 'NaI (Tl) crystal (1.0"diam x 0.04" thick) (25.4 x 1.0mm) by SE International

Typically, crystals are grown to order once we find the right one for your needs. Below are the specifications for the most common detectors that we offer in this variety.

NaI(Tl), or Sodium Iodide, crystal is recommended for nuclide identification in room temperature application. It provides the best energy resolution for gamma rays in this environment and is relatively inexpensive. Sodium Iodide probes are available in a wide variety of sizes.

The CsI (Tl), or Cesium Iodide, crystal used in Radiation Alert® Probes has a higher atomic number, is more rugged, and less hygroscopic than a typical Nal detector. The improved gamma ray absorption allows a thinner crystal to be used, effectively reducing the background count rate.

1 Inches X 1 Inches (Typically 1.0" dia x 1.0" thick (25.4 x 25.4mm)
2 inches X 2 Inches (Typically 2.0" dia x 2.0" thick (50.8 x 50.8mm)
Smaller and larger custom sizes available.
Nal(Tl) Standard. Optional Extra: BGO, Cs(Tl) or (Na), TSO. Contact for more info.

305ASDD12 30" Aluminum Exhaust Fan in Slant Wall Housing, 5-Wing, 1 / 2 Hp, Direct Drive by Schaefer

Schaefer aluminum slant wall exhaust fans are built with heavy-duty, corrosion resistant aluminum for best-in-class durability and longevity. Using only high quality and energy efficient motors, they are designed for exceptional performance and maximum efficiency, and provide low maintenance and operating costs. The aluminum slant wall exhaust fans are the ideal solution for air exchange and cooling needs in greenhouse application that want an extremely durable fan that will last for many years. Ships fully assembled with shutters to be easily installed in field.

Features and Benefits:

• 5-wing aluminum blade with low solidity ratio for maximum efficiency and airflow and quiet operation
• Durable aluminum vertical uprights for reliable housing and motor support
• Aluminum shutter with reduced flapping for greater efficiency
• Totally enclosed, maintenance free and thermally protected motor for long life and ease of use
• Belt drive models come equipped with self-adjusting idler style belt tensioner for easy adjustment
• Pre-lubricated, permanently sealed ball bearings with optional remote bearing lubrication system for easy maintenance
• OSHA inlet and outlet guards available for additional safety
• Available in belt drive or direct drive
• Suitable for buildings with up to 6" wall thickness using standard rough-in dimensions
• Two year warranty
• Made in the USA

365AS34 36" Aluminum Exhaust Fan in Slant Wall Housing, 5-Wing, 3 / 4 Hp, Belt Drive by Schaefer

Schaefer aluminum slant wall exhaust fans are built with heavy-duty, corrosion resistant aluminum for best-in-class durability and longevity. Using only high quality and energy efficient motors, they are designed for exceptional performance and maximum efficiency, and provide low maintenance and operating costs. The aluminum slant wall exhaust fans are the ideal solution for air exchange and cooling needs in greenhouse application that want an extremely durable fan that will last for many years. Ships fully assembled with shutters to be easily installed in field.

Features and Benefits:

• 5-wing aluminum blade with low solidity ratio for maximum efficiency and airflow and quiet operation
• Durable aluminum vertical uprights for reliable housing and motor support
• Aluminum shutter with reduced flapping for greater efficiency
• Totally enclosed, maintenance free and thermally protected motor for long life and ease of use
• Belt drive models come equipped with self-adjusting idler style belt tensioner for easy adjustment
• Pre-lubricated, permanently sealed ball bearings with optional remote bearing lubrication system for easy maintenance
• OSHA inlet and outlet guards available for additional safety
• Available in belt drive or direct drive
• Suitable for buildings with up to 6" wall thickness using standard rough-in dimensions
• Two year warranty
• Made in the USA

Pole Mount 30 Degree Angle with Base (Customer supplied 16' of 3-1 / 2" Schedule 40 Pipe)

7600 26W Explosion-Proof Fluorescent Hand Lamp for 7600-100WP - No Cable by Western Technology

Compact and light weight the 7600 fluorescent explosion proof work light offers high output and versatile configurations allowing up to ten 7600 units on a single primary power cable.

Features

• Complies with explosion proof/hazardous location requirements
• Features compact size/weight (4 lbs)
• Fluorescent lamp has higher light output than standard incandescent fixtures
• 26 & 13 watt available
• Stringer configuration up to 10 lights on 1 primary power cord available

M031-3211-200 MicroRAE Wireless Four-Gas Monitor, CSA/BLE/900M/GPS/LELf/O2/CO/H2S by RAE Systems

The MicroRAE four-gas portable detector brings enhanced user-friendliness and flexibility to wireless gas detection. This enables continuous, instant visibility of safety threats for faster, more informed decisions, to protect workers, facilities, and the environment, and to optimize operations.

The MicroRAE is a wireless diffusion detector that simultaneously monitors up to four gases, including hydrogen sulfide, carbon monoxide, oxygen and combustibles (LEL). With its different wireless connectivity options the MicroRAE can deliver real-time instrument readings and alarm status to other wireless offerings such as ConneXt Plus, ConneXt Pro, ConneXt Loneworker4 and Safety Communicator.

• Man Down Alarm with real-time remote wireless notification1
• GPS module for location
• Bluetooth® low energy connection to a Smart Phone device for uplink data communication and device configuration
• Remote notification and Panic function
• Fully automated bump testing and calibration with AutoRAE 2

Industries

Personal protection and general safety and compliance in:

• Lone Worker Applications
• Oil and Gas
• Waste water treatment
• Utilities
• Telecommunications
• Firefighting
• Petrochemicals
• Construction

Optional Accessories

• AutoRAE 2 Automatic Test and Calibration Systems
• Gang Charger (5 units)
• Auxiliary filter
• Hand pump kit
• Truck mount charger

Features & Benefits

• Honeywell ConneXt compatible with Mesh and Wifi wireless configurations
• Compact and lightweight
• IP-67 water and dust-resistant case
• Strong, protective, concussion-proof design
• Real-time gas concentration readings, location, alarm and status enabled by state of-the-art wireless technology
• Unmistakable five-way local and remote notification of alarm conditions
• Short bump test and calibration time
• Global approval for worldwide acceptance
• Filtered LEL sensor options to inhibit sensor poisoning
• Compatible with Safety Communicator
• Device Management with Honeywell SafetySuite

2801-26-003 CC 28 Fixed Gas Transmitter with Gas Optimized Catalytic Sensor 0-100% LEL (MK 208-1), 2-Butanon (MEK) (C4H8O), Display / Alarm by GfG

Superior technology

In areas where combustible gas or vapor hazards may exist, GfG s new CC 28 combustible transmitter is the perfect choice for reliable area monitoring. With its proven design, this ATEX certified transmitter offers an integrated explosion-proof buzzer and bright-alarm LEDs for reliable warning of combustible gas hazards (even in hazardous locations). This superior design provides warnings for immediate personnel, and ensures entire plant safety.

Easy handling

Smart sensor technology allows easy installation. Sensor replacement takes only a few seconds-simply plug in the sensor. User adjustments are performed at the transmitter with simple touch keys, or with the optional remote control interface (one person calibration).

RC2 remote control

Several combustible gases are lighter than air. With the transmitter mounted close to the ceiling, calibration can be difficult. The remote control for the CC 28 allows you to perform calibration or zero adjustments without the need of a ladder or lift. A flexible cable connects the remote control to the transmitter and displays the same reading as the display on the transmitter. With the remote control inspection,service and calibration can be performed easily by one person.

The sensor and the integrated temperature compensation provide highest measurement accuracy.

Low maintenance requirements and long sensor life reduce your cost of ownership. Just sign a service contract and don t worry about any problems. We will service your system at regular intervals.

Models

Model CC 28D allows you to read the gas concentration both at the transmitter and at the GMA controller.With the RC2 remote control - the CC 28 is easy to use and to operate even if it is mounted at the ceiling.

Model CC 28DA provides additional warning with bright integrated alarm LEDs and a buzzer.

Features

• Full-featured smart transmitter for combustible gas measurement
• Non-intrusive calibration adjustment
• Expected sensor life of 5 years
• Increased safety design to reduce installation cost in potentially hazardous locations
• ATEX EEx dem [1b] IIC T4
• Proprietary, high performance combustible gas sensor
• Available in three configurations: Blind (no display), Display, Display with local alarms

Advantages at a glance

• Display of gas concentration at transmitter or remote control
• ATEX II G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need of expensive EX-proof buzzer or wiring
• Easy sensor replacement with plug-in sensors
• Long life sensor
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments by means of touch keys or remote control without opening the casing
• Easy handling even at hard-to-reach accessible transmitter positions.