$100 - $150

08009-31 ASTM Like Liquid-In-Glass Thermometer; 54F / Congealing Point, Total Immersion, 68 to 213F, Organic Liquid Fill by Digi-Sense

These thermometers are precision manufactured to conform to ASTM E-1 specifications except for not being mercury filled. Designed for use in quality control laboratories or when mercury filled thermometers can not be used but where ASTM standards are still needed. ASTM established thermometer standards suited for special applications, and assigned an ASTM number according to each specification.

Thermometers feature permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered.

• Designed for specific ASTM (American Society for Testing and Materials) test methods
• Nonmercury blue spirit liquid

H-10-107-40 Sulfur Dioxide Colorimetric Gas Detection Tube, 0.2 - 5 % (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

18520-99 Type K Thermocouple Inconel Probe Quick DisConnector, Dual with Std-Connector, 18" L, .188 Dia, Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with ICONEL 600 sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

93800-72 Industrial Direct Insert RTD Probe with Aluminum Head, 12" Length by Digi-Sense

Industrial RTDs produce greater accuracy and are broken down into two market segments: industrial and sanitary. Aluminum heads are used in industrial applications, chemical processes, production lines, ovens, furnaces, and vessels. Poly heads are used in sanitary applications within the food, drug and pharmaceutical markets. The probes conductor is made of 24 gauge cooper wire and is encased with FEP insulation, and has a 316 stainless steel sheath. Featuring a standard size protection head with a gasketed cap to seal out dust and moisture and houses a ceramic terminal block. Head has a 3/4" NPT(F) opening on the side for easy connection to electrical conduit.

Spring loaded probes: designed to bottom out when inserted in to a thermowell to produce an accurate reading. (Not designed for direct insertion in to medium)

Non-spring loaded probes: designed to be directly inserted into the medium being measured without the use of a thermowell.

08009-43 ASTM Like Liquid-In-Glass Thermometer, 84C / Fuel Rating Orifice Tank, 249mm Immersion, 24 to 80C, Organic Liquid Fill by Digi-Sense

These thermometers are precision manufactured to conform to ASTM E-1 specifications except for not being mercury filled. Designed for use in quality control laboratories or when mercury filled thermometers can not be used but where ASTM standards are still needed. ASTM established thermometer standards suited for special applications, and assigned an ASTM number according to each specification.

Thermometers feature permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered.

• Designed for specific ASTM (American Society for Testing and Materials) test methods
• Nonmercury blue spirit liquid

90551-17 Adjustable Angle Bimetal Thermometer, 5" Dial, 9" L, Range 0-250F/-20-120C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

90491-02 Adjustable Angle Bimetal Thermometer, 3" Dial, 4" L/25-125F/-5-50C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

90550-73 Dampen Adjustable Angle Bimetal Thermometer 5" Dial 4" L; Range; 0-250F/-20-120C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Dampened movement
• More economical than silicone gauges
• Greater temperature range than a silicone-filled gauges
• Anti-parallax dial for accurate readings
• Eliminate the risk of a leaking case and cross-contamination
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments

1429099 Aluminum, AluVer® 3 Reagent Powder Pillows by AquaPhoenix

For aluminum determination by the aluminon method. Hach Method 8012. Range: up to 0.80 mg/L Al. Pack of 100 powder pillows.

WD-98768-04 Replacement Probe for 19601-08 by Oakton

Replace or upgrade electrodes, probes, cells, and parts for Traceable meters.

Optimize performance of your conductivity and pH/ORP meters

• Get accurate, reliable measurements with these replacement probes and adapters
• Suitable for use with conductivity meter 19601-08

90447-22 RTD Probe 1/8" OD 12" Lengt Standard Jack by Digi-Sense

Resistance Temperature Detectors, or RTDs, are used in many process and laboratory applications where accuracy and repeatability are of prime importance. RTD elements are available in many different materials and with different temperature coefficients. The most commonly used element is a wire-wound platinum element, conforming to the DIN standard and with a .00385 temperature coefficient.

Key Features

• All probes are low range
• 316 stainless steel sheath material
• Extension leadwire transition with relief spring (350,°F)
• 3-wire RTD, 100 Ω
• Accuracy ±0.1%
• -328 to 400°F (-200 to 204°C)
• .00385°C temperature coefficient
• Constructed using PTFE Insulated silver plated copper internal leads

08135-04 TI.31 12 Bottom-Mount Bimetal Thermometer, 3" Dial, 12" L/50-550F/10-290C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

Key Features

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

08009-52 ASTM Like Liquid-In-Glass Thermometer, 90C / Solidification Point, 76mm Immersion, 0 to 30C, Organic Liquid Fill by Digi-Sense

These thermometers are precision manufactured to conform to ASTM E-1 specifications except for not being mercury filled. Designed for use in quality control laboratories or when mercury filled thermometers can not be used but where ASTM standards are still needed. ASTM established thermometer standards suited for special applications, and assigned an ASTM number according to each specification.

Thermometers feature permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered.

• Designed for specific ASTM (American Society for Testing and Materials) test methods
• Nonmercury blue spirit liquid

SCT-108.001.18 SCT-pH-PEN-4 Waterproof Handheld PH/mV/Cond/TDS/Salt/Temp Meter by ScichemTech

Includes:

• Handheld PH/mV/Cond/TDS/Salt/Temp Meter
• Standard Solution (pH4, pH7 & 1413uS)
• Lanyard Connection
• Battery
• Instruction Manual

Features:

• Reliable SCT Multi Tester for pH, ORP, Conductivity, Salinity and Temperature measurements.
• Microprocessor based for fast and accurate measurements.
• Special viewing angle designed of waterproof housing IP 57 rated. It floats on water.
• Large LCD display for pH / ORP / Conductivity /TDS / Salinity and Temperature simultaneously.
• Easy to calibrate by one keyboard and Automatic Temperature Compensation (ATC), Manual Salinity(MSC) and Altitude(MAC) Compensation.
• Multi-functions with Data-hold, Max/Min and shows PTS after calibration Degree °C/°F are switchable. World best combination handhled meter.
• Auto power shut off after 10 minutes of non use.
• Easy to replace electrode module and the type of electrode would be recognized automatically and shown in display during insertion.
• Battery operated. Low battery and consumption indicator.

WD-35625-45 TempTestr® Infrared IR Food Thermometer by Digi-Sense

Ensure your food is at the proper temperature without contamination worries!

Our TempTestr IR Food model is optimized for the food preparation industry. It offers ±1%/1°C (2°F) accuracy in the HACCP critical temperature range of 0 to 60°C (32 to 150°F). This tester s high spectral response lets you take readings through steam. Laser sighting lets you pinpoint your exact target.

• Includes 9V battery, wrist strap and Instruction Manual
• Offers high ±1°C accuracy at HACCP critical temperature ranges
• Infrared temperature measurement provides safe, noncontact readings
• Laser sighting pinpoints your exact target
• °F/°C selectable
• Simple one-handed operation just point and press button! Extremely rapid response time 1/2 second for 95% response

Part Number: 34L-36-2