$100 - $150

Part Number: S197150VM2

Part Number: S10118VM1

93830-41 Type K Grounded Industrial Thermocouple Probe - 6" Length, 1/2" Connection by Digi-Sense

Thermocouple Probes Assemblies are ideal for use in industrial applications, chemical processes, production lines, ovens, furnaces, and vessels. The probes conductor is made of 20 gauge wire encased by ceramic insulators along with a standard size aluminum protection head. Head features a gasketed cap to seal out dust and moisture and houses a ceramic terminal block with screw terminals. Head has a 3/4" NPT (F) opening on the side for easy connection to electrical conduit. 316 stainless steel thermowells are included in assemble and are ideal for applications where removing of the probe without draining the vessel is necessary.

110-WHITE Bacteria Tests: Aerobic Bacteria Test Kit, 25 pk by AquaPhoenix

Bacterial growth in the industrial environment can often lead to serious economic consequences. Elevated bacterial populations in aqueous systems such as cooling waters, metalworking fluids, and hydrocarbon fuels are responsible for extensive losses in productivity. Problems related to high levels of bacteria in these liquids include corrosion, slime formation, foul odors, and general decreases in fluid function. Effective biocide treatment is possible only if the degree of of bacterial contamination is routinely determined. Sani-Check AB makes it fast and easy to monitor aerobic bacterial count, 25 tests per kit.

93830-49 Type J Grounded Industrial Thermocouple Probe, 6" Length, 1/2" Connection by Digi-Sense

Thermocouple Probes Assemblies are ideal for use in industrial applications, chemical processes, production lines, ovens, furnaces, and vessels. The probes conductor is made of 20 gauge wire encased by ceramic insulators along with a standard size aluminum protection head. Head features a gasketed cap to seal out dust and moisture and houses a ceramic terminal block with screw terminals. Head has a 3/4" NPT (F) opening on the side for easy connection to electrical conduit. 316 stainless steel thermowells are included in assemble and are ideal for applications where removing of the probe without draining the vessel is necessary.

WD-35635-30 Replacement Tungsten Filament Lamp (white light) by Oakton

Compatible with Oakton turbidity meters, ensure your meter is compatible with each accessory.

• Optimize performance of your Oakton turbidity meters
• Ideal replacement lamp for T-100WL turbidity meter

WD-35634-16 pHTestr® 5 Waterproof Pocket Tester by Oakton

Save money by replacing sensor, not the tester

Measuring water quality can be challenging. You need an instrument that is reliable over and over again. With the Oakton Waterproof Testr 5 Series pocket testers, you not only experience consistent reliability, but you also get a pocketful of useful features and benefits. You can also stretch your budget by only replacing the single-junction sensor and keeping the tester.

• Easy to set up and use
• Intuitive interface has self-diagnostic error messages, and stable reading and battery-life indicators
• Unique colored backlight indicates operating mode
• Simple to calibrate with automatic standard recognition USA or NIST
• Rugged IP67-rated housing is waterproof, dustproof, and floats in water with sensor cap on
• Leakproof cap with fill line functions as a sample, calibration, and hydrating cup
• Uses common AAA batteries

H-10-130-10 Chlorine Dioxide Colorimetric Gas Detection Tube, 0.25 - 15 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

535700 Silica HR Reagent Set 1-90 mg/L by AquaPhoenix

Lovibond VARIO Silica HR Reagent, Set F10
Range: 1 - 90 mg/L
Qty: 100 Tests

Part Number: HU-IN-FIL

LIDORG-100 Lid Organizer for TKPELICAN-100 by AquaPhoenix

The Pelican Lid Organizer is designed specifically for the Pelican case. It installs easily with the included touch fastener strips. It is made of Ballistic Nylon with nylon zippers and features a multitude of pockets in various sizes to protect and keep your gear organized.

FV-8250-G Glass Volumetric Class A 250mL by AquaPhoenix

Flask with standard taper Polyethylene Stoppers / Machine-blown bodies sealed to heavy-beaded, heavy-tubing necks. High thermal and chemical resistance. Calibrated "To Contain" within Class A Tolerances. Necks are ground for standard taper stopper. Linear high-density, closed-bottom polyethylene stoppers. Stopper No. 16.

08009-14 ASTM Like Liquid-In-Glass Thermometer; 15F / Low Softening Point, Total Immersion, 32 to 180F, Organic Liquid Fill by Digi-Sense

These thermometers are precision manufactured to conform to ASTM E-1 specifications except for not being mercury filled. Designed for use in quality control laboratories or when mercury filled thermometers can not be used but where ASTM standards are still needed. ASTM established thermometer standards suited for special applications, and assigned an ASTM number according to each specification.

Thermometers feature permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered.

• Designed for specific ASTM (American Society for Testing and Materials) test methods
• Nonmercury blue spirit liquid

90551-21 Adjustable Angle Bimetal Thermometer, 5" Dial, 12" L, Range 0-250F/-20-120C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw