$100 - $150

93831-96 Compact RTD Probe, 100 Ohm, ANSI 3-Blade Connector, . 1.5" L, 5ft SS Braid Cable by Digi-Sense

Maximum error for probe assembly is ±1.1°C + 0.12% of reading below 300°F, ±0.35% of reading above 300°F. Alpha coefficient is 0.003850 Ω/Ω/°C (DIN IEC 751). Resistance at ice point (0°C) is 100 Ω.

Note: Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five.

Note: The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Time Constant: 1-3 seconds or greater
• Custom designs or changes to this product are available upon request

Part Number: 34L-366

*Please note we can only ship RKI products to customers within the United States

CS150-K=0.1/BNC Light-Duty Contacting Conductivity / TDS Sensor with Automatic Temperature Compensation (ATC), Graphite, 12mm, K=0.1, BNC by Sensorex

The CS150 and CS150TC conductivity probes are a cost effective solution for measuring conductivity in light industrial and laboratory applications.

Sensors feature measuring surfaces. The durable epoxy body construction provides a rugged and dependable sensor for portable and laboratory use. Suitable for use with most portable conductivity meters.

By adding a simple mounting gland fitting, customers may use these in process applications. Mount them in-line, in a pipe "T" fitting, or submerse them into a tank.

Features:

• Ideal for laboratory and light duty process applicationsAvailable with or without ATC (temperature sensor)
• Easy to submerge in a tank or mount inline in a pipe
• Cell constant choices of 0.1 or 1.0
• Compatible with most portable and benchtop meters

SDS-7050 Refill Solution for SD7000 Salt Bridges (SDA-7001 / SDA-7003), 500mL by Sensorex

Chemical processing, industrial water and wastewater applications can be challenging environments for a pH sensor. Chemicals from the process mix with the reference electrolyte solution, changing the chemistry and leading to erratic readings. Fortunately, our differential pH and ORP sensors feature buffered reference electrolyte (SDS-7050), which can be replaced or refilled when needed. Also compatible with other brands, including Hach* and Water Analytics*. Contains 500mL.

Features:

• Internal fill solution for SD7000, SD7420, and SD7500 sensors
• Compatible with popular Hach & Water Analytics 5-wire differential pH & ORP models
• We stand behind all our products with the Sensorex Guarantee and one year warranty

08006-09 Dry Block/Incubator Liquid-In-Glass Thermometer; 18 to 60C, PFA Safety Coated; 35mm Immersion, Organic Liquid Fill by Digi-Sense

These thermometers are designed for use in specific applications. These Durac thermometers feature markings that are permanently printed on the glass, individually serialized, and red spirit liquid that has a dark scale contrasts against a white background. Some thermometers are PFA coated for added safety which may cause a slight change in accuracy up to 1 division.

Incubator thermometers - designed with a swell in the glass to hold the thermometer in place.

• Non-mercury liquid

Warning: This product is not approved or intended for, and should not be used for medical, clinical, surgical or other patient oriented applications.

147480 Orthophosphate Test Kit: CHECKIT Comparator Kit, 0-2.5 mg/L PO4 by AquaPhoenix

The Lovibond® CHECKIT® comparator is a compact, lightweight colorimetric unit suitable for both mobile and static water analysis. Available with a number of different colour scales, it provides the basis for a comprehensive easy-to-use analysis system.

Lovibond® CHECKIT Comparator Testkit, Phosphate, Powder Pack, 0 - 2.5 mg/l PO4

Each CHECKIT® Comparator Disc contains a continuous colour scale for exact colour matching between standard and sample.

WD-20250-42 USB Temperature/RH Datalogger by Digi-Sense

Each Digi-Sense data logger comes user ready with software, mounting clip and easy to following instructions. Intended applications include monitoring pharmaceutical, food & beverage, storage and office, museum, laboratory and transportation environments. Ease of use and affordability make these instruments ideal for any need where accurate temperature monitoring is needed.

Intuitive software supports two modes of data display and powerful data scaling and panning functionality. Data can be downloaded in spreadsheet compatible formats for analysis or graphically printed out. The durable polycarbonate housing and precision sensors and electronics are backed by a 2-year warranty.

Includes

software, mounting clip and hardware, protective plastic cover, and battery.

0554 2160 Handle Adapter for Connecting Testo 440 Air Flow Probes by Testo

• For connecting probe heads for air velocity probes or extendable telescope for air velocity probes to the universal handle with Bluetooth or cable

Includes:

Handle adapter for connection to air velocity probes with universal handle.