Ph /conductivity /tds /salinity /modern water.html

P-520 Portable PH /Conductivity Meter by Peak Instruments

Main Features

• Large LCD screen with controllable white backlight.
• Humanized designs like rack and skid proof shell make it more convenient for users.
• Double-parameter and equipped with pH electrode and conductivity electrode, can recognize electrode automatically.
• Built-in microprocessor chip with functions of auto calibration, auto temperature compensation, data storage, function setup, self-diagnosis, auto power off, low voltage display.
• Auto recognition of standard pH buffers and there are three series of standard buffers for option: USA, NIST and China.
• Able to set pH measurement modes of high purity water and pure water with ammonia.
• Auto recognition of 8 standard conductivity buffers and there are two series of standard buffers for option: USA series, China series.
• Adopt advanced conductivity measurement technology, one point calibration of conductivity electrode can meet the measuring accuracy requirements for test 0.5μ S/cm ~ 200mS/cm.
• Able to switch between conductivity, TDS, salinity and resistivity multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity mode has the function of non-linear temperature compensation for high purity water.
• IP57 and equipped with calibration solution. There is optional carrying case.

EC60-E Replacement Probe for EC60 Pocket Conductivity/TDS/Salinity Tester by Apera

The Apera Instruments EC60-E probe is the replacement probe for EC60 Pocket Tester as well as the PC60 pH/Conductivity Pocket Tester. This probe features Apera's unique Brush-Resistant Platinum Black (BPB) sensor, ensuring accurate conductivity measurement in a wide range (0.1 μs to 20.00 MS). It enables you to Test conductivity (EC), TDS and salinity at the same time. Its TDS range is 0.1 ppm to 10.00 PPT; salinity range is 0 to 10.00 PPT. Works great for common aqueous solution and waste water's conductivity test. CE Certified with a 6 moth warranty.

• EC Measuring Range: 0.1 μs to 20.00 MS; TDS Range: 0.1 ppm - 10.00 ppt; Salinity Range: 0 - 10.00 ppt
• Apera's unique Brush-Resistant Platinum Black Sensor ensures accurate Conductivity measurement in a wide range
• Built-in temperature sensor
• Suitable for common aqueous solution, pure water and waste water's Conductivity/TDS/Salinity testing

EC400S Portable Conductivity/TDS/Salinity/Resistivity Meter by Apera

The Apera Instruments EC400S provides accurate and stable EC measurements with various intelligent functions and a durable structure.

Equipped with Apera's unique BPB (Brush-Resistant Platinum Black) conductivity sensor, the meter takes accurate measurements of EC, TDS, Salinity, Resistivity and temperature in a wide range (0 to 200 mS/cm)

Intelligent Functions: Quick & Easy 1 to 4 Points Auto Calibration. The Smart Self-Diagnosis helps you conduct proper calibrations and determine the condition of your probe. GLP Data management (500 groups of data storage), USB data output and power supply. Timing measuring/data logging mode and Smart calibration reminder function available. The large clear LCD displays EC and temperature simultaneously along with icons of stable readings and finished calibrations.

Reliable Structure: IP57 Waterproof and Dustproof, ideal for use in harsh environments. It comes with a complete test kit including a meter, a conductivity electrode, a USB cable, and 3 bottles of calibration solutions all in a rugged carrying case. Powered by AA Batteries. Two-Year warranty for the meter. CE certified.

• Takes quick and accurate measurements of EC, TDS, Salinity, and Resistivity in a wide range (0 to 200 mS/cm)
• IP57 Waterproof and Dustproof, ideal for use in harsh environments
• The large backlit LCD displays EC and temperature simultaneously along with icons of stable readings and finished calibrations.
• GLP Data management (500 groups of data storage), USB data output and power supply
• Quick and Easy 1 to 4 points auto calibration with calibration reminder function (premixed standard solutions included)

EC60 Premium EC/TDS/Salinity Pocket Tester by Apera

The Apera Instruments EC60 Pocket EC/TDS/Salinity Tester simply tests all kinds of regular EC measurements in an ACCURATE, QUICK, and RELIABLE manner. The applications include hydroponics, tap/drinking water, pools & spas, education, water treatment, environmental monitoring, etc. Up to 3 points of Auto Calibration with auto buffer recognition and 0 to 50°C Auto Temperature Compensation (ATC), 0.01 mS/±1% F.S, 0.5°C accuracy with measuring range of 0-200.0 μS/cm, 0-2000 μS/cm, 0-20.00 mS/cm, 0-50.0°C.

APERA's unique BPB (Brush-Resistant Platinum Black) sensor adopts a special processing technology, which minimizes electrode polarization, expands measuring range, and increases firmness of the electrode, hence ensuring a much higher accuracy and consistency in a wide-range conductivity measurement than traditional stainless steel electrodes, and is easy to clean. The probe is replaceable and easy to install so that you don't have to buy a whole new meter once the probe retires.

Auto recognition and indication of stable values improves consistency, saving you the trouble of guessing when to manually hold measurement. With an large clear 180° viewing angle screen with 2 backlit color (blue for measuring mode and green for calibration mode), it supports dual display of temp./EC value and indications of completed calibrations (where M/H indicate 2 points of calibrations) and stable readings (with a smiley face).

Easy menu setting, customizing your tester functions according to your needs (switch of temperature unit, TDS factor setting, Switch of salinity unit, auto hold on/off). Smart self-diagnosis, warning of out-of-range/preset measurement and incorrect calibrations.

Comes with a complete kit. IP67 waterproof and dustproof, floating on water. 1000 hours' continuous operation powered by AAA batteries (with low power warning and auto power off in 8 min if no operation).

Warranty: 2 years for the meter, 6 months for the probe.

• APERA's unique Replaceable BPB (Brush-resistant Platinum Black) probe ensures high accuracy and consistency in a wide-range conductivity measurement
• EASY Auto Calibration with auto buffer recognition; Auto Temp. Compensation (ATC) ensures accuracy in variant temperatures (0-50.0°C)
• LARGE CLEAR LCD with 2 backlit color (indicating 2 different modes), DUAL Display of temp./EC, and indications of completed calibrations and stable readings
• EASY Switch from EC to TDS/Salinity with customizable TDS factor (0.40-1.00)
• Complete kit with ready-to-use calibration solutions, calibration bottles, AAA batteries, and a lanyard all in a portable carrying case

Salt20 Value Salinity Pocket Tester by Apera

The Apera Instruments Sal20 tester is simply the most reliable pocket salinity tester with the best value for all kinds of regular salinity testing, including tap water, agriculture, aquaculture, education, etc. Range: 0-10.0 ppt, Accuracy: ±1% F.S.

The BPB (Brush-Resistant Platinum Black) sensor adopts our special processing technology, which minimizes electrode polarization, expands measuring range, and increases firmness of the electrode, hence ensuring a much higher accuracy and consistency in a wide-range salinity measurement than traditional stainless steel electrodes, and is easy to clean.

Large clear 180° viewing angle screen with temp./salinity value dual display and indications of completed auto calibrations and stable readings. Great functions to make your testing experience a lot easier: 1-point auto calibration with auto buffer recognition, 0 to 50°C auto temp. compensation. Easy switch of salinity unit (ppt-g/L). Self-diagnosis with out-of-range and low battery warning, and incorrect calibration reminder.

Complete kit with calibration solution (5 ppt), AAA batteries, and a lanyard all in a portable carrying case. IP67 waterproof and dustproof, floats on water so no need to worry if you drop it in the water by accident. 1000 hours' continuous operation powered by AAA batteries (with low power warning and auto power off in 8 min if no operation).

The meter is CE certified and comes with a 2-YEAR Warranty. The company designs and manufactures scientific analytical instruments like meters and sensors for pH, conductivity, turbidity, and dissolved oxygen for over 25 years, and meets ISO 9001:2008 Standards.

• APERA's unique BPB (Brush-resistant Platinum Black) probe ensures high accuracy and consistency in a wide-range salinity measurement
• EASY Auto Calibration with auto buffer recognition; Auto Temp. Compensation (ATC) ensures accuracy in variant temperatures (0-50.0°C)
• LARGE CLEAR LCD with DUAL Display of temp./ppt, and REMINDERS of completed calibrations and stable readings
• COMPLETE KIT with READY-TO-USE calibration solutions, batteries, and a lanyard in a portable carrying case
• 1000 hours' continuous operation time powered by AAA batteries

PC400 Portable pH/Conductivity/TDS Meter by Apera

The Apera Instruments PC400 is the most economical choice for a reliable portable pH& conductivity meter. Equipped with Apera's high quality 3-in-1 pH electrode and BPB (Brush-Resistant Platinum Black) conductivity sensor, the meter tests pH, EC, TDS, and temperature in a quick and accurate manner.

Intelligent Functions: Quick & Easy 1 to 4 Points Auto Calibration. The Smart Self-Diagnosis helps you conduct proper calibrations and determine the condition of your probe. Fully configurable parameter setting: solution standards, temperature unit, backlight time, auto-power off time, TDS factor, temperature coefficient, etc. The large clear LCD displays pH/EC and temperature simultaneously along with icons of stable readings and finished calibrations.

Reliable Structure: IP57 Waterproof and Dustproof, ideal for use in harsh environments. It comes with a complete test kit including a meter, a pH electrode, a conductivity electrode, and 6 bottles of calibration solutions in a rugged carrying case. Powered by AA Batteries. Two-Year warranty for the meter. CE certified.

• The high quality 3-in-1 pH Combination electrode and BPB Conductivity Electrode ensure Quick & Accurate pH and EC measurements
• IP57 Waterproof and Dustproof, ideal for use in harsh environments
• The large clear LCD displays EC/pH and temperature simultaneously along with icons of stable readings and finished calibrations.
• Quick and Easy 1 to 4 points auto calibration
• Comes with a complete test kit in a rugged carrying case. 2-Year Warranty.

6377 Benchtop Conductivity Meter Kit by Jenco

Kit Includes:

• 6377 - Benchtop pH/Conductivity/Temperature Meter
• 109L - Glass/Platinum, W/ 8-Pin Connector, K=1.0 Cell Constant
• 600P - pH Electrode, 3-ft Cable, BNC Connector, Max Temp. 60 Deg. C
• 6230D115 - AC Adapter, 9 VDC, Center Negative

The Basis Series pH/mV/Conductivity/Salinity/TDS/temperature benchtop meter is the Multi-parameter meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Improved electrode serviceability and low cost of ownership

Well-designed, Inside and Out

The Basis Series pH/EC Multi-parameter meter forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Renowned Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with 0.01 pH and 0.1 mV resolution
• Repeatable, accurate results achieved with up to 5 points NIST or US buffer calibration for pH, 1 point ORP and 1 point Conductivity offset calibration.
• Non-volatile memory holds up to 750 data points.
• Each and every unit is hand calibrated and QC ed by at least 2 teams

Upgraded User Experience and Usability

Streamlined and modern design is paired with a large, high contrast backlit LCD, buttons with tactile and audio feedback, and a detached electrode holder arm.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Well-situated keys with tactile feedback
• AC adaptor or battery powered
• Splash-resistant case made with durable, reinforced plastic for added protection

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series pH/mV/Conductivity/Salinity/TDS/temperature benchtop meter uses a standard BNC connector for pH and ORP so it works with a vast majority of electrodes available on the market. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• BNC connector for pH or ORP electrodes
• 8-Pin DIN for temperature and conductivity probe

6377KA Benchtop Conductivity Meter Kit by Jenco

Kit Includes:

• 6377 - Benchtop pH/Conductivity/Temperature Meter
• 109L - Glass/Platinum, W/ 8-Pin Connector, K=1.0 Cell Constant
• 600P - pH Electrode, 3-ft Cable, BNC Connector, Max Temp. 60 Deg. C
• 6230D115 - AC Adapter, 9 VDC, Center Negative
• 007A - Electrode Holder, Spring Balanced, Alumimum Swing Arm

The Basis Series pH/mV/Conductivity/Salinity/TDS/temperature benchtop meter is the Multi-parameter meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Improved electrode serviceability and low cost of ownership

Well-designed, Inside and Out

The Basis Series pH/EC Multi-parameter meter forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Renowned Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with 0.01 pH and 0.1 mV resolution
• Repeatable, accurate results achieved with up to 5 points NIST or US buffer calibration for pH, 1 point ORP and 1 point Conductivity offset calibration.
• Non-volatile memory holds up to 750 data points.
• Each and every unit is hand calibrated and QC ed by at least 2 teams

Upgraded User Experience and Usability

Streamlined and modern design is paired with a large, high contrast backlit LCD, buttons with tactile and audio feedback, and a detached electrode holder arm.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Well-situated keys with tactile feedback
• AC adaptor or battery powered
• Splash-resistant case made with durable, reinforced plastic for added protection

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series pH/mV/Conductivity/Salinity/TDS/temperature benchtop meter uses a standard BNC connector for pH and ORP so it works with a vast majority of electrodes available on the market. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• BNC connector for pH or ORP electrodes
• 8-Pin DIN for temperature and conductivity probe

6377KB Benchtop Conductivity Meter Kit by Jenco

Kit Includes:

• 6377 - Benchtop pH/Conductivity/Temperature Meter
• 101C - Epoxy/Platinum, W/ 8-Pin Connector, K=0.475 Cell Constant
• 600P - pH Electrode, 3-ft Cable, BNC Connector, Max Temp. 60 Deg. C
• 6230D115 - AC Adapter, 9 VDC, Center Negative

The Basis Series pH/mV/Conductivity/Salinity/TDS/temperature benchtop meter is the Multi-parameter meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Improved electrode serviceability and low cost of ownership

Well-designed, Inside and Out

The Basis Series pH/EC Multi-parameter meter forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Renowned Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with 0.01 pH and 0.1 mV resolution
• Repeatable, accurate results achieved with up to 5 points NIST or US buffer calibration for pH, 1 point ORP and 1 point Conductivity offset calibration.
• Non-volatile memory holds up to 750 data points.
• Each and every unit is hand calibrated and QC ed by at least 2 teams

Upgraded User Experience and Usability

Streamlined and modern design is paired with a large, high contrast backlit LCD, buttons with tactile and audio feedback, and a detached electrode holder arm.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Well-situated keys with tactile feedback
• AC adaptor or battery powered
• Splash-resistant case made with durable, reinforced plastic for added protection

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series pH/mV/Conductivity/Salinity/TDS/temperature benchtop meter uses a standard BNC connector for pH and ORP so it works with a vast majority of electrodes available on the market. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• BNC connector for pH or ORP electrodes
• 8-Pin DIN for temperature and conductivity probe

6377KBA Benchtop Conductivity Meter Kit by Jenco

Kit Includes:

• 6377 - Benchtop pH/Conductivity/Temperature Meter
• 101C - Epoxy/Platinum, W/ 8-Pin Connector, K=0.475 Cell Constant
• 600P - pH Electrode, 3-ft Cable, BNC Connector, Max Temp. 60 Deg. C
• 6230D115 - AC Adapter, 9 VDC, Center Negative
• 007A - Electrode Holder, Spring Balanced, Alumimum Swing Arm

The Basis Series pH/mV/Conductivity/Salinity/TDS/temperature benchtop meter is the Multi-parameter meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Improved electrode serviceability and low cost of ownership

Well-designed, Inside and Out

The Basis Series pH/EC Multi-parameter meter forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Renowned Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with 0.01 pH and 0.1 mV resolution
• Repeatable, accurate results achieved with up to 5 points NIST or US buffer calibration for pH, 1 point ORP and 1 point Conductivity offset calibration.
• Non-volatile memory holds up to 750 data points.
• Each and every unit is hand calibrated and QC ed by at least 2 teams

Upgraded User Experience and Usability

Streamlined and modern design is paired with a large, high contrast backlit LCD, buttons with tactile and audio feedback, and a detached electrode holder arm.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Well-situated keys with tactile feedback
• AC adaptor or battery powered
• Splash-resistant case made with durable, reinforced plastic for added protection

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series pH/mV/Conductivity/Salinity/TDS/temperature benchtop meter uses a standard BNC connector for pH and ORP so it works with a vast majority of electrodes available on the market. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• BNC connector for pH or ORP electrodes
• 8-Pin DIN for temperature and conductivity probe

3177MK Benchtop Conductivity Meter Kit by Jenco

The Basis Series Conductivity/TDS/Salinity benchtop is the latest entry-level meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Low cost of ownership

The Basis Series Conductivity/TDS/Salinity meter, along with the pH/mV model, forms the foundation of Jenco s benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Benchtop Conductivity/TDS/Salinity Meter Renowned for Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with ±0.5% full scale accurate across entire measurement range
• Uses 2-wire conductivity cells with adjustable k=0.1 or 4-wire conductivity cells k=0.475 cell constants for improved flexibility and accuracy
• Each and every unit is hand calibrated and QC'ed by at least 2 teams
• Simple one point calibration

Upgraded User Experience and Usability

While the Basis Series provides the quality readings you expect, it does so in a design that optimizes its user-friendliness and minimizes its footprint on your workstation.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Convenient one point calibration
• Automatically determines the best conductivity ranges to display readings
• Well-situated keys with tactile feedback
• Splash-resistant case made with durable, reinforced plastic for added protection
• AC adaptor or battery powered

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series Conductivity/TDS/Salinity meter uses a common Jenco 8-pin DIN connector so it works with our other conductivity electrodes. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• Splash-resistant case is made with durable, reinforced plastic for added protection
• 8-pin DIN connector for conductivity cell & 10k thermistor
• Optional, detached electrode arm

Kit Includes:

• 3177M - Benchtop, Conductivity/Temperature/TDS Meter with Memory
• 109L - Glass/Platinum, Conductivity Sensor, K=0.1, 8-Pin Connector
• 110/240VAC - 110 ~ 240V Power Adapter

3177MKA Benchtop Conductivity Meter Kit by Jenco

The Basis Series Conductivity/TDS/Salinity benchtop is the latest entry-level meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Low cost of ownership

The Basis Series Conductivity/TDS/Salinity meter, along with the pH/mV model, forms the foundation of Jenco s benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Benchtop Conductivity/TDS/Salinity Meter Renowned for Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with ±0.5% full scale accurate across entire measurement range
• Uses 2-wire conductivity cells with adjustable k=0.1 or 4-wire conductivity cells k=0.475 cell constants for improved flexibility and accuracy
• Each and every unit is hand calibrated and QC'ed by at least 2 teams
• Simple one point calibration

Upgraded User Experience and Usability

While the Basis Series provides the quality readings you expect, it does so in a design that optimizes its user-friendliness and minimizes its footprint on your workstation.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Convenient one point calibration
• Automatically determines the best conductivity ranges to display readings
• Well-situated keys with tactile feedback
• Splash-resistant case made with durable, reinforced plastic for added protection
• AC adaptor or battery powered

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series Conductivity/TDS/Salinity meter uses a common Jenco 8-pin DIN connector so it works with our other conductivity electrodes. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• Splash-resistant case is made with durable, reinforced plastic for added protection
• 8-pin DIN connector for conductivity cell & 10k thermistor
• Optional, detached electrode arm

Kit Includes:

• 3177M - Benchtop, Conductivity/Temperature/TDS Meter with Memory
• 109L - Glass/Platinum, Conductivity Sensor, K=0.1, 8-Pin Connector
• 110/240VAC - 110 ~ 240V Power Adapter
• 007A - Alumimum Swing Arm

3177MKB Benchtop Conductivity Meter Kit by Jenco

The Basis Series Conductivity/TDS/Salinity benchtop is the latest entry-level meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Low cost of ownership

The Basis Series Conductivity/TDS/Salinity meter, along with the pH/mV model, forms the foundation of Jenco s benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Benchtop Conductivity/TDS/Salinity Meter Renowned for Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with ±0.5% full scale accurate across entire measurement range
• Uses 2-wire conductivity cells with adjustable k=0.1 or 4-wire conductivity cells k=0.475 cell constants for improved flexibility and accuracy
• Each and every unit is hand calibrated and QC'ed by at least 2 teams
• Simple one point calibration

Upgraded User Experience and Usability

While the Basis Series provides the quality readings you expect, it does so in a design that optimizes its user-friendliness and minimizes its footprint on your workstation.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Convenient one point calibration
• Automatically determines the best conductivity ranges to display readings
• Well-situated keys with tactile feedback
• Splash-resistant case made with durable, reinforced plastic for added protection
• AC adaptor or battery powered

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series Conductivity/TDS/Salinity meter uses a common Jenco 8-pin DIN connector so it works with our other conductivity electrodes. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• Splash-resistant case is made with durable, reinforced plastic for added protection
• 8-pin DIN connector for conductivity cell & 10k thermistor
• Optional, detached electrode arm

Kit Includes:

• 3177M - Benchtop, Conductivity/Temperature/TDS Meter with Memory
• 101C - Epoxy/Carbon, 8-Pin Connector, K=0.475
• 110/240VAC - 110 ~ 240V Power Adapter

3177MKBA Benchtop Conductivity Meter Kit by Jenco

The Basis Series Conductivity/TDS/Salinity benchtop is the latest entry-level meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Low cost of ownership

The Basis Series Conductivity/TDS/Salinity meter, along with the pH/mV model, forms the foundation of Jenco s benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Benchtop Conductivity/TDS/Salinity Meter Renowned for Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with ±0.5% full scale accurate across entire measurement range
• Uses 2-wire conductivity cells with adjustable k=0.1 or 4-wire conductivity cells k=0.475 cell constants for improved flexibility and accuracy
• Each and every unit is hand calibrated and QC'ed by at least 2 teams
• Simple one point calibration

Upgraded User Experience and Usability

While the Basis Series provides the quality readings you expect, it does so in a design that optimizes its user-friendliness and minimizes its footprint on your workstation.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Convenient one point calibration
• Automatically determines the best conductivity ranges to display readings
• Well-situated keys with tactile feedback
• Splash-resistant case made with durable, reinforced plastic for added protection
• AC adaptor or battery powered

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series Conductivity/TDS/Salinity meter uses a common Jenco 8-pin DIN connector so it works with our other conductivity electrodes. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• Splash-resistant case is made with durable, reinforced plastic for added protection
• 8-pin DIN connector for conductivity cell & 10k thermistor
• Optional, detached electrode arm

Kit Includes:

• 3177M - Benchtop, Conductivity/Temperature/TDS Meter with Memory
• 101C - Epoxy/Carbon, 8-Pin Connector, K=0.475
• 110/240VAC - 110 ~ 240V Power Adapter
• 007A - Alumimum Swing Arm

3177K0.1 Benchtop Conductivity Meter Kit by Jenco

Kit Includes:

• 3177 - Benchtop, Conductivity/Temperature/TDS Meter
• 109 - Glass/Platinum, W/ 8-Pin Connector, K=0.1
• 6230D115 - AC Adapter, 9 VDC, Center Negative

The Basis Series Conductivity/TDS/Salinity benchtop is the latest entry-level meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Low cost of ownership

Well-designed, Inside and Out

The Basis Series Conductivity/TDS/Salinity meter, along with the pH/mV model, forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Benchtop Conductivity/TDS/Salinity Meter Renowned for Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with ±0.5% full scale accurate across entire measurement range
• Uses 2-wire conductivity cells with adjustable k=0.01, k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy
• Each and every unit is hand calibrated and QC'ed by at least 2 teams
• Simple one point calibration

Upgraded User Experience and Usability

While the Basis Series provides the quality readings you expect, it does so in a design that optimizes its user-friendliness and minimizes its footprint on your workstation.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Convenient one point calibration
• Automatically determines the best conductivity ranges to display readings
• Well-situated keys with tactile feedback
• Splash-resistant case made with durable, reinforced plastic for added protection
• AC adaptor or battery powered

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series Conductivity/TDS/Salinity meter uses a common Jenco 8-pin DIN connector so it works with our other conductivity electrodes. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• Splash-resistant case is made with durable, reinforced plastic for added protection
• 8-pin DIN connector for conductivity cell & 10k thermistor
• Optional, detached electrode arm

3177K1 Benchtop Conductivity Meter Kit by Jenco

Kit Includes:

• 3177 - Benchtop, Conductivity/Temperature/TDS Meter
• 101 - Epoxy/Carbon, 8-Pin Connector, K=1.0
• 6230D115 - AC Adapter, 9 VDC, Center Negative

The Basis Series Conductivity/TDS/Salinity benchtop is the latest entry-level meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Low cost of ownership

Well-designed, Inside and Out

The Basis Series Conductivity/TDS/Salinity meter, along with the pH/mV model, forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Benchtop Conductivity/TDS/Salinity Meter Renowned for Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with ±0.5% full scale accurate across entire measurement range
• Uses 2-wire conductivity cells with adjustable k=0.01, k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy
• Each and every unit is hand calibrated and QC'ed by at least 2 teams
• Simple one point calibration

Upgraded User Experience and Usability

While the Basis Series provides the quality readings you expect, it does so in a design that optimizes its user-friendliness and minimizes its footprint on your workstation.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Convenient one point calibration
• Automatically determines the best conductivity ranges to display readings
• Well-situated keys with tactile feedback
• Splash-resistant case made with durable, reinforced plastic for added protection
• AC adaptor or battery powered

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series Conductivity/TDS/Salinity meter uses a common Jenco 8-pin DIN connector so it works with our other conductivity electrodes. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• Splash-resistant case is made with durable, reinforced plastic for added protection
• 8-pin DIN connector for conductivity cell & 10k thermistor
• Optional, detached electrode arm

3177K10 Benchtop Conductivity Meter Kit by Jenco

Kit Includes:

• 3177 - Benchtop, Conductivity/Temperature/TDS Meter
• 107 - Glass/Platinum, W/ 8-Pin Connector, K=10
• 6230D115 - AC Adapter, 9 VDC, Center Negative

The Basis Series Conductivity/TDS/Salinity benchtop is the latest entry-level meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Low cost of ownership

Well-designed, Inside and Out

The Basis Series Conductivity/TDS/Salinity meter, along with the pH/mV model, forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Benchtop Conductivity/TDS/Salinity Meter Renowned for Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with ±0.5% full scale accurate across entire measurement range
• Uses 2-wire conductivity cells with adjustable k=0.01, k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy
• Each and every unit is hand calibrated and QC'ed by at least 2 teams
• Simple one point calibration

Upgraded User Experience and Usability

While the Basis Series provides the quality readings you expect, it does so in a design that optimizes its user-friendliness and minimizes its footprint on your workstation.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Convenient one point calibration
• Automatically determines the best conductivity ranges to display readings
• Well-situated keys with tactile feedback
• Splash-resistant case made with durable, reinforced plastic for added protection
• AC adaptor or battery powered

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series Conductivity/TDS/Salinity meter uses a common Jenco 8-pin DIN connector so it works with our other conductivity electrodes. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• Splash-resistant case is made with durable, reinforced plastic for added protection
• 8-pin DIN connector for conductivity cell & 10k thermistor
• Optional, detached electrode arm

3177KA Benchtop Conductivity Meter Kit by Jenco

Kit Includes:

• 3177 - Benchtop, Conductivity/Temperature/TDS Meter
• 101 - Epoxy/Carbon, 8-Pin Connector, K=1.0
• 6230D115 - AC Adapter, 9 VDC, Center Negative
• 007N - Plastic Holder, Spring Balanced Swing Arm

The Basis Series Conductivity/TDS/Salinity benchtop is the latest entry-level meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Low cost of ownership

Well-designed, Inside and Out

The Basis Series Conductivity/TDS/Salinity meter, along with the pH/mV model, forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Benchtop Conductivity/TDS/Salinity Meter Renowned for Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with ±0.5% full scale accurate across entire measurement range
• Uses 2-wire conductivity cells with adjustable k=0.01, k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy
• Each and every unit is hand calibrated and QC'ed by at least 2 teams
• Simple one point calibration

Upgraded User Experience and Usability

While the Basis Series provides the quality readings you expect, it does so in a design that optimizes its user-friendliness and minimizes its footprint on your workstation.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Convenient one point calibration
• Automatically determines the best conductivity ranges to display readings
• Well-situated keys with tactile feedback
• Splash-resistant case made with durable, reinforced plastic for added protection
• AC adaptor or battery powered

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series Conductivity/TDS/Salinity meter uses a common Jenco 8-pin DIN connector so it works with our other conductivity electrodes. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• Splash-resistant case is made with durable, reinforced plastic for added protection
• 8-pin DIN connector for conductivity cell & 10k thermistor
• Optional, detached electrode arm

WD-35660-26 PC250 Waterproof Dual-Channel pH, ORP, Conductivity, TDS, Resistivity, and Salinity Handheld Meter Kit by Oakton

Get easy-to-read and accurate readings with auto-hold, auto-stable, and real-time measurements with stability indicators. The Environmental Express® Oakton® 200 series of water quality meters features an electrode status indicator, which shows the condition of the electrode after each calibration. Easily view electrode condition, reading stability, measured parameter, and temperature in one screen. Don't worry about accuracy in fluctuating temperature—ATC ensures measurement accuracy. The simple user interface features adjustable auto shut-off time ranging from 1 to 30 minutes. Self-diagnosing meters display measurement and meter issues for fast fault finding and troubleshooting.

Easily take measurements and conveniently store meter and electrodes with built-in foldable stand on the back of the meter. Two grooves on the side of the meter serve as electrode holders, to hold up to 2 electrodes.

Choose from two series—the 250 series feature 500 data points while the 260 series features 1000 data points, a real-time clock, and USB communication.

• Rugged, waterproof, and dustproof with an IP67 rating for use in any environment
• Nonslip ergonomic design for comfortable handling
• Easily view measurements with large monochrome LCD with white LED backlighting
• Download and analyze data with USB output and phono jack printer connections
• Take it with you—500 hours of battery life
• Accurately measure pH, ORP, conductivity, TDS, resistivity, salinity, and temperature

Includes

meter, electrode, calibration solutions, and 2 AA batteries.

WD-35660-28 PC260 Waterproof Dual-Channel pH, ORP, Conductivity, TDS, Resistivity, and Salinity Handheld Meter Kit by Oakton

Get easy-to-read and accurate readings with auto-hold, auto-stable, and real-time measurements with stability indicators. The Environmental Express® Oakton® 200 series of water quality meters features an electrode status indicator, which shows the condition of the electrode after each calibration. Easily view electrode condition, reading stability, measured parameter, and temperature in one screen. Don't worry about accuracy in fluctuating temperature—ATC ensures measurement accuracy. The simple user interface features adjustable auto shut-off time ranging from 1 to 30 minutes. Self-diagnosing meters display measurement and meter issues for fast fault finding and troubleshooting.

Easily take measurements and conveniently store meter and electrodes with built-in foldable stand on the back of the meter. Two grooves on the side of the meter serve as electrode holders, to hold up to 2 electrodes.

Choose from two series—the 250 series feature 500 data points while the 260 series features 1000 data points, a real-time clock, and USB communication.

• Rugged, waterproof, and dustproof with an IP67 rating for use in any environment
• Nonslip ergonomic design for comfortable handling
• Easily view measurements with large monochrome LCD with white LED backlighting
• Download and analyze data with USB output and phono jack printer connections
• Take it with you—500 hours of battery life
• Accurately measure pH, ORP, conductivity, TDS, resistivity, salinity, and temperature

Includes

meter, electrode, calibration solutions, and 2 AA batteries.

WD-35660-46 PC250 Waterproof Dual-Channel pH, ORP, Conductivity, TDS, Resistivity, and Salinity Handheld Meter by Oakton

Get easy-to-read and accurate readings with auto-hold, auto-stable, and real-time measurements with stability indicators. The Environmental Express® Oakton® 200 series of water quality meters features an electrode status indicator, which shows the condition of the electrode after each calibration. Easily view electrode condition, reading stability, measured parameter, and temperature in one screen. Don't worry about accuracy in fluctuating temperature—ATC ensures measurement accuracy. The simple user interface features adjustable auto shut-off time ranging from 1 to 30 minutes. Self-diagnosing meters display measurement and meter issues for fast fault finding and troubleshooting.

Easily take measurements and conveniently store meter and electrodes with built-in foldable stand on the back of the meter. Two grooves on the side of the meter serve as electrode holders, to hold up to 2 electrodes.

Choose from two series—the 250 series feature 500 data points while the 260 series features 1000 data points, a real-time clock, and USB communication.

• Rugged, waterproof, and dustproof with an IP67 rating for use in any environment
• Nonslip ergonomic design for comfortable handling
• Easily view measurements with large monochrome LCD with white LED backlighting
• Download and analyze data with USB output and phono jack printer connections
• Take it with you—500 hours of battery life
• Accurately measure pH, ORP, conductivity, TDS, resistivity, salinity, and temperature

Includes

meter, and 2 AA batteries.

WD-35660-48 PC260 Waterproof Dual-Channel pH, ORP, Conductivity, TDS, Resistivity, and Salinity Handheld Meter by Oakton

Get easy-to-read and accurate readings with auto-hold, auto-stable, and real-time measurements with stability indicators. The Environmental Express® Oakton® 200 series of water quality meters features an electrode status indicator, which shows the condition of the electrode after each calibration. Easily view electrode condition, reading stability, measured parameter, and temperature in one screen. Don't worry about accuracy in fluctuating temperature—ATC ensures measurement accuracy. The simple user interface features adjustable auto shut-off time ranging from 1 to 30 minutes. Self-diagnosing meters display measurement and meter issues for fast fault finding and troubleshooting.

Easily take measurements and conveniently store meter and electrodes with built-in foldable stand on the back of the meter. Two grooves on the side of the meter serve as electrode holders, to hold up to 2 electrodes.

Choose from two series—the 250 series feature 500 data points while the 260 series features 1000 data points, a real-time clock, and USB communication.

• Rugged, waterproof, and dustproof with an IP67 rating for use in any environment
• Nonslip ergonomic design for comfortable handling
• Easily view measurements with large monochrome LCD with white LED backlighting
• Download and analyze data with USB output and phono jack printer connections
• Take it with you—500 hours of battery life
• Accurately measure pH, ORP, conductivity, TDS, resistivity, salinity, and temperature

Includes

meter, and 2 AA batteries.