Jenco Universal Process Indicator/test products international.html

203 Universal Process Indicator/Transmitter Panel Meter by Jenco

The model 203 is a high performance, industrial grade, universal digital process indicators for current and voltage output transmitters. Programmab1e internal dip switches allows the model 203 to accept inputs of 1-5 mA, 4-20, 10-50 mA, 0-20 mA, 1-5 VDC, 0-5VDC, 1-6 VDC, 1-10 VDC, 0-10 VDC and 1-11 VDC. Two independent excitation voltages are available to power most of the commercially available 2-wire current output transmitters and 3-wire voltage output transmitters.

Internal dip switches in conjunction with the front panel ZERO and SPAN controls, decimal point position select, dummy zero select and polarity select allow the model 203 to be scaled to display in any engineering units.

207 Universal Loop Powered Indicator by Jenco

The model 207 is a high performance, industrial grade, loop powered process indicators. The model 207 can be user programmed for 4-20 mA or 10-50 mA operations.

Internal dip switches in conjunction with the ZERO and SPAN controls, decimal point position select, dummy zero select and polarity select allow the models 207 to be scaled to display in any engineering units.

217 Universal Loop Powered Indicator, NEMA 4X by Jenco

The model 217 is a high performance, industrial grade, loop powered process indicator housed in an environmentproof NEMA-4X plastic case.

The model 217 can be field programmable for 4-20 mA or 10-50 mA operations.

Internal DIP switches in conjunction with the 25 turn ZERO and SPAN controls, decimal point position select, dummy zero select and polarity select, allows the model 217 to be scaled to display in any engineering units.

196 Process Meter by Test Products International

The Triple Display 196 is an innovative new concept in DMM design. The unique display enables you to view more than one event at a time. This eliminates the hassle of switching back and forth to review minimum, maximum or preset comparative values. The meter is also easy to use and built to last.

The DMM 196 is a hand-held autoranging DMM. The backlit LCD can display three readings at one time. In addition to basic function of AC/DC V, AC/DC A, Ohm, Diode test, continuity, Capacitance, Frequency, there is the adaptor function. The DMM 196 also has RS232 output and software for recording information into a PC.

Features:

• REC: Records Min/Max and Average readings during specified measurement intervals.
• COMP:Compare actual reading to preset HI and LOW value for Pass/Fail testing of component
• Hold: Tow hold system automatically holds the previous stable reading when a new one is obtained.
• Large 50,000 count display: increases resolution and improves accuracy (1.7" x 2.75", 43mm x 70mm)
• 0-24mA output: t for process controls
• Triple Display: shows more than one reading simultaneously
• 51 Segment Analog Bar Graph: to catch fast AC fluctuations
• Logic Test: Indicates transitions up to 2 MHz.
• Frequency Counter: Measure low frequency signals from 1Hz to 2 MHz and display duty cycle, pulse width and period.
• Back Light (LED Type) allows viewing in any light condition
• Auto Range automatically selects the best range for the measurement
• Separate battery and fuse compartment for easy replacement
• Auto Power Off DMM will automatically power down after approximately 15 minutes of inactivity to extend battery life. Disable Auto Power Off: Hold down the REC button and turn the meter on
• Increased safety with Silicone rubber 1,000V CAT III, 600V CAT IV, 10A test leads (CE & cUL listed)
• Diode Test displays approximate forward bias voltage
• Process DMM with 0 to 24mA output
• 0.05% DCV basic accuracy
• 0 to 750 ACV; max resolution 100uV
• 0 to 1,000 DCV: max resolution 0.001mV
• 0 to 50MΩ; max resolution 0.01Ω
• Audible continuity
• AC/DC amps up to10 amps; resolution 0.01 uA
• Analog bar graph
• cULus 61010-1

Applications:

• View industrial signals such as motor control, UPS, switching power supplies, and PLC controls with 1MHz bandwidth
• Capture noise spikes, glitches, and intermittents with 20 megasamples per second sampling rate
• Full autoranging, True RMS, DMM capabilities
• Measure resistance and test for continuity
• Continually updated display provides a live presentation
• Water Purification
• Chemical Processing
• Oil & Gas
• Power Generation
• Pulp & Paper
• Food & Beverage

S8100-ORP/10/TL Submersion Process ORP Sensor Kit by Sensorex

The S8000 series flat surface self-cleaning electrode platform is designed for versatility and flexibility. You purchase only the components that you need and can adapt what you have to changing interface or application requirements.

The pH and ORP sensors provide reliable performance in demanding applications, including pressurized applications, by utilizing Sensorex's proven flat surface technology. Liquid flow naturally cleans the flat sensor surface, reducing maintenance and downtime. When the sensors need to be replaced, install a replacement cartridge in seconds with no tools or rewiring required. For applications involving heavy metals, proteins, silver, or sulfides, Sensorex's ERP technology provides a complex path that protects the reference cell and prevents contamination. Heavy duty high temperature reference gels offer protection against thermal breakdown, while a PPS body allows for durability in a range of chemical environments.

For applications that require more than a direct electrode output, plug-in electronic modules are available. Caps/cables are stocked and ready to ship in two standard lengths, 10 feet and 20 feet. Special cable lengths are also available.

Features:

• Customizable packages reduce total cost of ownership
• Reliable performance in demanding applications
• Configuarable for in-line or submersion use
• Self-cleaning, flat surface design
• Perfect for pressurized applications

98766-08 Traceable Universal Digital Stopwatch with Calibration by Digi-Sense

When zero is reached, the alarm sounds and repeats the countdown from the programmed time. Timing cycle repeats automatically, or until stopped; count area of display shows number of repeat cycles. The dual-line LCD continuously displays time remaining to zero - ideal for analysis that must be noted at routine intervals.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Provides repeat function of countdown alarm timing
• Set pacer function from 0.1 (600 beats/min) to 30 seconds (2 beats/min) - beat counting up to 99 times

Includes

One 3 V button cell, lanyard, and NIST-traceable calibration certificate with data.

0560 0400 400 Universal Airflow / IAQ Instrument by Testo

testo 400 is the universal measuring instrument for all IAQ professionals, enabling them to measure, document and analyze all IAQ parameters with just one instrument. Your benefits:

• Smart support through stored measurement menus and evaluation of measuring values according to the traffic light principle for error-free measurements
• Manage all the relevant customer data, including measuring points, directly in the instrument - work directly and efficiently on site
• Complete and send measuring values with full documentation, including photos, comments and your own logo directly on site get to the next job faster
• Probe heads can be changed without restarting the instrument easy handling with no lost time
• Calibration of probes which is independent of the measuring instrument and adjustment function at up to six measuring points for zero-error display fewer downtimes and high-precision measurements

As consultants, experts, technical service providers or service technicians in the air conditioning and ventilation sector, the testo 400 therefore supports you in the truly smart performance of your measuring tasks. Relevant quality parameters in industrial production and manufacturing processes can also be reliably and accurately checked using the testo 400.

• Measures all IAQ-related parameters: Flow, temperature, humidity, pressure, illuminance, radiant heat, turbulence, CO₂ and CO
• High-precision, location-independent and integrated differential pressure sensor
• High-quality digital probes and an intelligent calibration concept
• Document measuring values directly on the customer's site and send them by e-mail, or further analyze them using the testo DataControl PC software

XNX Universal Transmitter by Honeywell Analytics

The XNX Universal Transmitter, now with HART EDDL, marks a new turn in gas detection from Honeywell Analytics. It supports the widest range of sensors on a common platform and offers a modular choice of inputs and outputs.

XNX is designed for flexible integration, simple installation, user-friendly operation and straight-forward maintenance. It is ideal for use with a range of gas monitoring controllers or industry standard PLCs. The introduction of our HART Enhanced Device Descriptor Language (EDDL) software provides users with an at-a-glance indication of the health of their gas detectors in the field.

Bringing together the best solutions in gas detection

Electrochemical

• Proven electrochemical sensing technology
• Surecell™ electrochemical cells are ideal for hot and humid environments
• Long life sensing cells (typical >2 years)
• Patented 'Reflex' sensing element verification diagnostics
• Sensor recognition software auto configures transmitter
• Plug and play factory configured sensors
• Intrinsically safe sensor connection permits hot swap, reducing down time

Catalytic Bead

• Supports Honeywell Analytics 705, 705HT, Sensepoint, Sensepoint HT and MPD sensors
• Fast response to wide range of hydrocarbons and flammables

Infrared (Open Path IR, Point IR, IR Cell)

• Supports Honeywell Analytics Searchline Excel, Searchpoint Optima Plus
• Failsafe operation
• Fast speed of response
• Reduced routine maintenance
• Immune to catalytic poisons
• Long operating life
• Works in inert atmospheres

High performance

• Flammable gas detection 0 to 100% LFL/LEL
• Point IR with heated optics provides immunity to poisoning and no hidden faults
• Open-path IR flammable gas detection in LEL-m measurement
• Electrochemical cell offers toxic gas detection in ppm
• IR cell provides CO₂ and combustible gas monitoring
• Robust and reliable operation in explosive areas and harsh environments

Flexible Operation

• 3 versions - supports (Catalytic Bead and IR Cell), Electrochemical Cell and IR (point and open-path) gas detection
• Multi-Purpose Detector (MPD) with field serviceable mV, Catalytic bead and IR Cell capability
• 4-20mA with HART® as standard
• HART Enhanced Device Description Language (EDDL) software*
• Multiple communications options include up to 3 relays, MODBUS® and FOUNDATION® H1 Fieldbus
• Optional local IS port for handheld HART configurator

Easy to Use

• Large, backlit, easy-to-view LCD display offers multisensory indicators (visual icons, colored buttons, text, etc.) to display gas and sensor readings
• User interface supported by 8 selectable languages (English, Spanish, German, Italian, Portuguese, French, Russian, Chinese)
• Self-test and fault indication features
• Non-intrusive, one-man operation
• Quick calibration with auto-inhibit

Easy to Install

• 3 or 4 wire operation, source, sink or isolated
• Simple plug-in sensors and replaceable cells
• NEMA 4X IP66 rated for rugged indoor/outdoor use
• Five conduit entries for ease of installation

Cost Effective

• Minimal training required
• One-man operation
• Plug-in sensor replacement
• All necessary accessories included

CS300 Process Graphite Contacting Conductivity Sensor by Sensorex

Sensorex's CS300 Process Graphite Contacting Conductivity Sensor is designed for light industrial process applications (cooling towers).

• Use with an S855 cable assembly for quick disconnect helping reduce maintenance time in conventional conductivity applications using transmitters.
• Use with the EM802 electronics module and the S856 cable to turn the CS300 into a smart sensor for use directly with SCADA systems.

0560 6230 623 Hygrometer with Process Indicator by Testo

The new temperature and humidity measuring instrument testo 623 shows current and past temperature and humidity values in a large clear display. This makes an analysis of the current and past ambient conditions possible, directly on site and without time-consuming analysis on a PC.

• Histogram shows current and past temperature or humidity values.
• Hanging and standing bracket allows felxible positioning on a wall or desktop
• Analysis of past temperature and humidity values directly on site without evaluation on a PC
• All important values at a glance: current and past temperature and humidity values as well as date and time
• Large, optimally legible display
• Curve display of the past 90 days

3921 DO/Temperature Controller by Jenco

DO & temperature controller with 2 sets of On/Off relays, stored calibration data, backlit LCD display for DO and temperature, universal power supply 100 to 240 VAC and packaged in an easy to install plastic panel mount water resistant 1/8 DIN IP65 case. Uses Hamilton Company Oxysens and Easyferm DO electrodes.

• Easy to install 1/8 DIN plastic casing
• Clear LCD displays dissolved oxygen or temperature with backlight
• Calibration data is stored in memory and is ready for use on power up
• Universal power supply input from 100 ~ 240 VAC
• Automatic or manual temperature compensation
• Two sets of programmable on/off relays for DO
• CE and RoHS complain

3931 DO/Temperature Transmitter by Jenco

DO & temperature transmitter with an isolated & reversible 4 to 20 mA current output, stored calibration data, backlit LCD display for DO and temperature, universal power supply 100 to 240 V AC and packaged in an easy to install plastic panel mount water resistant 1/8 DIN IP-65 case. Uses Hamilton Company Oxysens and Easyferm DO electrodes.

• Easy to install 1/8 DIN plastic casing
• Clear LCD displays dissolved oxygen or temperature with backlight
• Calibration data is stored in memory and is ready for use on power up
• Universal power supply input from 100 to 240 V AC
• Automatic or manual temperature compensation
• Isolated and reversible 4 to 20 mA current output for DO allows it to be used as a proportional output
• CE and RoHS complain

03313-65 Traceable Universal Thermohygrometer with Calibration, 10 to 95% RH, -40 to 220°F by Digi-Sense

Thermohygrometers accurately measure humidity and temperature, and calculate dew point. Program high/low audible/visual alarms for temperature, humidity, and dew point. Choose from two models: universal or fast-response.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2005(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Audible alarm and flashing display actuate when high or low limits are exceeded

Includes

ABS plastic housing, probe with 4 1/2-ft cable, one 9 V battery, plastic carrying case and NIST-traceable calibration certificate with data.