Testo

0699 6446/1 6446 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor

Measuring Range: -80 to +300 °C

0563 3163 Refrigerant Leak Detector by Testo

testo 316-3 is a reliable leackage detector for refrigerants which should be part of every professional's refrigeration technology equipment. It detects even the samllest leaks thanks to ist high level of sensitivity of 4 g/a, and fulfils the requirements of the F-gas regulation as well as the standards SAE J1627 and EN 14624:2012. The instrument is ready for use immediately after switching on, without the need for selecting a characteristic curve. Thanks to the automatic zeroing, the testo 316-3 detects leaks even in rooms which have already been contaminated.

LED indicator of leakage with simultaneous audible alarm

• High sensitivity 4 g/a allows the detection of the smallest leaks
• Detects all common refrigerants 3. Easiest possible operation thanks to a single button
• Easiest possible operation thanks to a single button
• Immediate readiness with no pre-settings

400563 4161 416 Small Vane Anemometer Kit by Testo

The compact testo 416 anemometer with permanently attached vane probe with telescopic handle (max. 890mm). Volume flow is shown directly in the display. Accurate volume flow calculation due to easy input of duct area. Timed and multi-point mean calculation provide information on mean volume flow. Min/max values can also be shown in the display. The Hold function enables you to freeze the current reading in the display.

Kits includes:

• 0560 4160 - 416 Mini-Vane Anemometer
• 0516 0210 - Soft carrying case - small

• Direct display of volume flow
• Multi-point or timed mean calculation
• Max/min values
• Hold button to freeze readings
• Display light
• Auto-Off function
• TopSafe, instrument protection against dirt and knocks (optional)

Measuring Range: -100 to +400 °C

Measuring Range: -50 to +250 °C

0563 2063 206 pH3 Instrument Kit by Testo

The testo 206 series is ideally suited for applications in liquid and semi-solid media. The instruments stand out thanks to the combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free and insensitive to dirt.

The automatic final value recognition supports the user during measurement. The protective cover TopSafe provides the instruments with the protection class IP68, it is dishwasher-safe, hygienic and protects the measuring instrument from dirt, water and impact.

The testo 206-pH1 is specially designed for fast pH checks in liquids.

The testo 206-pH2 is ideally suited for pH measurement in semi-solid and protein-rich foods such as jellies, creams, cheese, fruit etc.

The testo 206-pH3 is equipped with a BNC socket which allows the connection of any pH probes to the instrument, depending on the application. This makes the instrument universally applicable.

Kit includes:

• One-hand pH/°C measuring instrument
• pH3 probe head with BNC interface
• TopSafe
• Belt/wall holder

• Ideally suited to applications in liquid and semi-solid media (e.g. in the food sector)
• Built-in temperature sensor
• Maintenance-free gel electrolyte
• Robust, waterproof and dishwasher-safe protective cover (TopSafe, protection class IP65)
• Automatic final value recognition (Auto-hold)
• Two-line display
• 1, 2, or 3-point calibration possible

0560 6081 608-H1 Large Display Temperature & RH Meter with Min/Max Display by Testo

The affordable standard testo 608-H1 hygrometer measures humidity, temperature and dewpoint non-stop. The efficient testo 608-H2 alarm hygrometer with LED alarm function for accurate signals when limits are exceeded.

• With dew point calculation td and max/min display
• Humidity sensor is not affected by condensation
• Battery monitoring

400563 6352 635-2 Compact Pro Dewpoint (HPD) Kit by Testo

The instrument for measuring air moisture, material equilibrium moisture and pressure dewpoint in compressed air systems. Moisture characteristics can be recorded in the instrument memory and analysed and displayed in graphics or tables. Up to 3 temperature or humidity probes can be displayed in the testo 635-2 meter; data transmission is by radio i.e. wireless. Selectable user profiles, i.e. allocation of specific function buttons and menu-guide to an application enable intuitive operation. Material moisture can be displayed immediately on account of the special probe. Characteristics for different materials can be stored in ComSoft and transmitted to the instrument. testo 635 immediately displays the dewpoint difference between ambient air and the wall surface in the analysis of moisture on walls and ceilings. Precision probes up to -60°C tpd are available to check pressure dewpoint in compressed air systems. The humdity sensor developed by Testo has proven itself worldwide and has outstanding features in terms of precision, long-term stability, temperature resistance and robustness.

Kit Includes:

• 0563 6352 - 635-2 with memory & software
• 0636 9836 - Precision Press Dewpoint Probe
• 0516 0435 - Deluxe service case for Compact Pro

• Instrument memory for up to 10,000 readings
• PC software for analysis, filing and documentation of measurement data
• Measurement of air moisture, material equilibrium moisture, pressure dew point
• Radio probe for temperature and humidity
• Protection class IP54
• Direct display of material moisture due to freely settable characteristics curves (based on equilibrium humidity)
• Storage of single measurements or measurement series by measurement location
• Fast access to the most important functions via user profiles
• U-value probe connection option

Measuring Range: -50 to +400 °C

Measuring Range: -100 to +400 °C

Measuring Range: -58 to +302°F