$750 - $1000, Testo

0563 3110 310 Residential Analyzer Kit with Printer by Testo

The testo 310 has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated. The instrument stands out thanks to its easy handling and simple menu structure. You can read off the measurement values confidently and conveniently from the well-lit display, even in bad light conditions. The fuels are stored not just as numbers, but are each described. At the top edge of the clear display, the symbols for the different measurement menus are always in view. The display and the dirt-insensitive keypad are clearly structured. Operation is very easy even if you only have one hand free.

Kit Includes:

• testo 310 analyzer
• probe & hose
• silicon tubing
• extra particulate filters (5)
• pressure plugs (5)
• AC power supply/recharger (USB)
• calibraton certificate
• IR printer
• 2 rolls of thermal paper
• hard case

• Robust and light instrument for daily use
• 30 seconds sensor zeroing
• O2 and CO measurement
• Integrated magnets for easy fixing to burner

Applications:

• Flue gas measurement
• Draught measurement
• Ambient CO measurement
• Pressure measurement

0572 1765 176 H1 4-Channel Temperature/RH Logger with 2 External Connections for temp-humidity probes (NTC/capacitive) by Testo

When short-term measurements show no anomalies, but the storeroom climate still does not meet the desired requirements, then the testo 176 H1 is the right data logger. It has two connections for external humidity probes which can be positioned in the room according to the individual requirements.

• Waterproof according to IP 65
• integrated USB and SD card interface for reading out data
• Large memory for 2 million measurement values - large, easily legible display
• Parallel temperature and humidity measurement
• Various connectable humidity and temperature probes e.g. for monitoring humidity in storerooms

0563 5703 570-1 Refrigeration System Analyzer (RSA) Kit by Testo

Your toolcase is probably heavy, and filled with many useful helpers for your daily work. In the future, the new testo 570 will replace several of these tools. Because it is the robust expert for all imaginable measurements on a refrigeration system or heat pump with one instrument. Whether for pressure, temperature or current, you benefit from the extensive analysis possibilities and numerous technical features for all measurement tasks on a system. The testo 570-1 set contains one clamp probe, a calibration protocol and batteries.

One instrument, multiple benefits

The digital manifold testo 570 offers you all you need for your work on refrigeration systems and heat pumps. The internal data store of the testo 570 replaces manual work steps, thanks to the clear and easily understood documentation option of a measurement. Carry out long-term measurements or record data in real time, and present them graphically. The easy operation of testo 570 makes this possible. Apart from this, errors can be found and rectified more quickly in cases of malfunction. Manual documentation is a thing of the past. Measurement results can be traced, and reports called up, at any time.

Kits includes:

• 570 Refrigeration System Analyzer
• 0613 5505 - 2 Clamp probes (NTC)
• 0449 0047 - USB cable
• 0516 5700 - Hard carry case

• 4-way valve block with 4 connections, 4 hose parkers and sight glass
• Integrated vacuum measurement supports evacuation of the system
• Heat pump mode and display of high and low pressure as well as temperature
• Temperature-compensated tightness testing
• Additional calculation of superheating and subcooling
• Computer-supported monitoring of a system with up to 999h of measurement value recording
• EasyKool software with extended features
• Refrigerant management and administration of exact filling levels
• 40 refrigerants stored

0560 5350 535 Ambient CO2 Meter by Testo

testo 535, the efficient CO2 measuring instrument for measuring indoor air quality. Bad air quality in rooms can lead to tiredness, lack of concentration and illness (Sick Building Syndrome) due to high CO2 concentration (greater than 1000 ppm)

• Long-term monitoring based on maximum and mean calculation
• Long-term stable 2 channel infrared sensor
• Highly accurate, highly efficient
• Repeated calibration is unnecessary

0563 7352 735-2 Compact Pro Thermometer with Memory & Software by Testo

The robust and compact measuring instrument with a probe socket for highly accurate Pt100 probes and two sockets for fast-action thermocouple probes. Readings from up to three additional temperature probes can be displayed in the testo 735-2 measuring instrument's clear display; data transmission is by radio, i.e. wireless. The measurement values can be simultaneously transferred to a PC and stored there. In this way, a total of 6 channels is recorded by the measuring instrument. A system accuracy of 0.05 °C with a resolution of 0.001 °C is reached using the plug-in highly accurate Pt100 immersion/penetration probe. The measuring instrument is therefore ideally suited for use as a working standard. Temperature characteristics are recorded in the instrument and then analysed in graphics and tables on your PC/Notebook. Data is printed on site on the Testo fast printer using infrared. Selectable user profiles, i.e. allocation of specific function buttons to an application facilitate intuitive and fast operation. Individual protocols or measurement series can be stored according to site. Up to 99 sites can be stored in the instrument. The storage cycle is user-defined between 0.5 seconds and 24 hours.

• System accuracy up to 0.05 °C
• Instrument memory for up to 10,000 readings
• PC software for filing, analysing and documenting measurement data (included)
• Displays, saves and prints Delta T, min, max and mean values
• Audible alarm if limit values are exceeded
• Protection class IP65
• Instrument memory for 10,000 readings (testo 735-2)
• PC software for filing and documenting measurement data (testo 735-2)
• Freely selectable storage cycle from 1 second to 24 hours
• Accuracy over the entire measurement range thanks to system adjustment
• The measurement values can be displayed in the instrument and simultaneously transferred to a PC and stored (testo 735-2)

0555 6442 Compressed Air Flow Transmitter (1" line) by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. Using the compressed air counters testo 6441 to testo 6444, transparency of consumption is created for compressed air, similarly as for the media current, water or gas, thus increasing the motivation of those responsible for the process regarding cost reduction measures and energy savings. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop. While the thermal, glass-coated ceramic sensor offers a high level of robustness and fast response times, the integrated inflow and outflow pipes ensure optimum accuracy.

• Measurement of norm volume flow in the measuring range 0.25 to 700 m³/h (DN15 to DN50 or 1/2"-2"); consumption quantity in m³; media temperature in °C
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display

0563 8165 816 Sound Level Meter by Testo

Compared to testo 815, the larger model has additional features which make it ideal for assessors, workplace measurements and for measuring industrial and environmental noise.

• Easy to adjust (adjustment screwdriver included)
• Frequency weighting to characteristic A and C
• Maximum and minimum memory
• Built-in tripod knuckle screw (1/4 inch)
• Switchable time weighting Fast / Slow
• Automatic range switchover
• Backlit display
• Mains unit connection
• BarGraph display
• AC output to connection from recorders and amplifiers
• DC output with 10 mV/dB to connect recorders or dataloggers
• testo 816:
• Time weighting
• Section measurement range
• Frequency weighting
• Current reading
• Automatic range switchover
• Backlit display
• Mains unit connection
• Barograph display
• AC output for connecting recorders and amplifiers
• DC output with 10 mV/dB for connecting recorders or data loggers

0555 6441 Compressed Air Flow Transmitter (1/2" line) by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. Using the compressed air counters testo 6441 to testo 6444, transparency of consumption is created for compressed air, similarly as for the media current, water or gas, thus increasing the motivation of those responsible for the process regarding cost reduction measures and energy savings. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop. While the thermal, glass-coated ceramic sensor offers a high level of robustness and fast response times, the integrated inflow and outflow pipes ensure optimum accuracy.

• Measurement of norm volume flow in the measuring range 0.25 to 700 m³/h (DN15 to DN50 or 1/2"-2"); consumption quantity in m³; media temperature in °C
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display

0572 1763 176 T3 4-Channel Temperature Logger in metal housing with 4 external thermocouple connections (Type T, K, J) by Testo

It is sometimes important to test whether the prescribed temperature limit values in a process are being adhered to. The testo 176 T3 in its robust metal housing is the right data logger for parallel measurement and recording of temperature values at 4 different sites in industrial processes. The requirements of a many different applications can be fulfilled using a broad range of connectable thermocouple probes (Type K, Type T, Type J).

• Wareproof according to IP65
• Integrated USB and SD card interface for reading out data
• Large memory for 2 million measurement values - robust metal housing (without display)
• Simultaneous temperature measurement at up to four measurement sites thanks to different connectable thermocouple probes for the most widely differing applications
• Robust metal housing protects from mechanical influences such as impact

Measuring Range: -20 to +120°C
Measuring Range: 0 to +100 %RH

Measuring Range: +0.6 to +60 m/s

Measuring Range: 0 ... +1 Vol. % CO2 0 ... +10000 ppm CO2

0563 4352 435-2 Multifunction Meter with memory & software by Testo

The measuring instrument for ambient air conditions, for assessment of Indoor Air Quality and adjusting and testing VAC systems, stands out on account of its efficient measurement process. Probe-controlled menus and selectable user profiles, e.g. for duct measurement or long-term measurement, ensure the user-friendliest operation possible. The new IAQ probe measures Indoor Air Quality by measuring the CO2 level, air moisture and air temperature. In addition, the lux probe and comfort level probe can be connected to assess draught air. Clear analysis and archiving ensure practical PC documentation. Temperature and humidity measurement is integrated in the new thermal probe. The special flow protocol professionally documents duct measurements. It is also possible to connect additional temperature and humidity probes. Readings from up to 3 temperature or humidity probes can be clearly displayed in the measuring instrument; data transmission is by radio, i.e. wireless.

• Instrument memory for 10,000 readings
• PC software for analysis, archiving and documenting data
• IAQ probe, lux probe and comfort level probe
• Vane measurement and thermal probes
• Radio probes for temperature and humidity
• Protection class IP54

Measuring Range: 0 to +500 ppm CO

0563 6352 635-2 Compact Pro Thermohygrometer with Memory & Software by Testo

The instrument for measuring air moisture, material equilibrium moisture and pressure dewpoint in compressed air systems. Moisture characteristics can be recorded in the instrument memory and analysed and displayed in graphics or tables. Up to 3 temperature or humidity probes can be displayed in the testo 635-2 meter; data transmission is by radio i.e. wireless. Selectable user profiles, i.e. allocation of specific function buttons and menu-guide to an application enable intuitive operation. Material moisture can be displayed immediately on account of the special probe. Characteristics for different materials can be stored in ComSoft and transmitted to the instrument. testo 635 immediately displays the dewpoint difference between ambient air and the wall surface in the analysis of moisture on walls and ceilings. Precision probes up to -60°C tpd are available to check pressure dewpoint in compressed air systems. The humdity sensor developed by Testo has proven itself worldwide and has outstanding features in terms of precision, long-term stability, temperature resistance and robustness.

• Instrument memory for up to 10,000 readings
• PC software for analysis, filing and documentation of measurement data
• Measurement of air moisture, material equilibrium moisture, pressure dew point
• Radio probe for temperature and humidity
• Protection class IP54
• Direct display of material moisture due to freely settable characteristics curves (based on equilibrium humidity)
• Storage of single measurements or measurement series by measurement location
• Fast access to the most important functions via user profiles
• U-value probe connection option

0572 1764 176 T4 4-Channel Temperature Logger with 4 External Thermocouple Connections (Type T, K, J) by Testo

You can measure and document flow and return temperatures with the testo 176 T4 at 4 different places, for example at the distributor og an underfloor heating system, in order to test its functionality. The requirements of a many different applications can be fulfilled using a broad range of connectable thermocouple probes (Type K, Type T, Type J).

• Large memory for 2 million measurement values - large, easily legible display
• up to 8 years battery life
• Standard battery (AA) replaceable by user
• Scope of delivery: Data logger testo 176 T4 incl. wallholder, lock, batteries, calibration certificate and instruction manual

0560 6450 645 Professional Meter / Logger by Testo

The testo 645 humidity measuring instrument automatically displays the parameters relative humidity, absolute humidity, dew point, degree of humidity, enthalpy and temperature. Convenient data analysis on your PC with location name.

• Highly accurate humidity meas. to ±1%RH
• Internal data memory
• Convenient data analysis
• TopSafe for tough applications
• Channel 1: Temperature probe Type K/J/S, NTC
• Channel 2: Combi-probe humidity/temperature or temperature probe Pt100

Measuring Range: +0.25 to +20 m/s