$150 - $200, Testo

0560 0510 510 Pocket Pro Pressure Meter with Air Velocity by Testo

The differential pressure meter is ideally suitable for pressure measurements in the range 0 to 100 hPa. testo 510's differential pressure measurement is temperature-compensated for accurate readings. Readings can be displayed in Pascal over the whole measurement range. Magnets at the back of the instrument enable hands-free operation, for instance, while adjusting gas heaters.

• Display in Pascal possible over entire measurement range
• Accuracy: ±0.03 hPa (0 to 0.30 hPa) / ±0.05 hPa (0.31 to 1.00 hPa)
• Temperature compensation
• Magnetic rear permits free-hand work
• Flow velocity measurement with Pitot tube (Pitot tube not included in delivery)
• Air density compensation
• Protective cap for safe storage
• Including wrist strap and belt holder
• Backlit display
• Switchable units: hPa, mbar, Pa mmH2O, mmHg, inH2O, inHg, psi, m/s, fpm

0560 6053 605-H1 Humidity Stick with Dew Point by Testo

The thermohygrmeter you can bend. Small, compact and accurate. The long-term stable sensor guarantees correct measurement results even after years.

• Dewpoint calculation from -20 to +50 °Ctd
• Long-term stable Testo humidity sensor
• Ideal for measurements in ducts
• Display can be angled for easy readout of measurement values
• Air moisture, air temperature and dew point

0560 6060 606-1 Pocket PRO Moisture Meter by Testo

testo 606-1 measures material moisture. Material moisture is displayed in percent by weight using stored material characteristic curves for wood and building materials.

• Accurate wood moisture measurement with stored characteristic curves for beech, spruce, larch, oak, pine, maple
• Additional characteristic curves to locate wet points in building materials for cement screed, concrete, plaster, anhydrite screed, cement mortar, lime mortar, brick
• Hold function for easy readout of readings
• Display illumination
• Self-test function
• Protective cap for safe storage
• Belt case, wrist strap and calibration protocol included

0560 9056 905-T2 Temp Stick (surface probe) by Testo

testo 905-T2, the complete innovation. A surface thermometer in professional quality at the lowest price. The sprung thermocouple measurement head guarantees a very fast reaction time and high accuracy by always lying flat, even on rough surfaces.

• Very fast reaction time
• High accuracy
• Sprung thermocouple cross-band adapts to any surface
• Easy readout of readings due to rotatable display
• Very simple to operate
• Auto-Off function

0560 9250 925 Type K Thermometer by Testo

The one channel temperature measuring instrument for connection to reliable, fast-action thermocouple probes. An additional temperature probe can be displayed in testo 925; data is transmitted by radio, i.e. wirelessly. An audible alarm sounds if limit values are exceeded. Current measurement data as well as max/min data can be printed on site on the Testo fast printer.

• 1 channel measuring instrument with optional radio probe
• Wide range of probes
• Continuous display of max/min values
• Hold button to freeze reading
• TopSafe, indestructible case, protects from dirt and impact (option)
• Display light
• Special probes for industrial kitchen sector
• An audible alarm sounds when limit values are exceeded

0560 9261 926 Type T Food Thermometer by Testo

The fast-action, efficient temperature measuring instrument, testo 926, for the food sector. The optional TopSafe protection case renders it insensitive to dirt, therefore making it the ideal partner for large-scale kitchens, hotels, restaurants or the food industry. Besides measuring minimum and maximum values, readings can also be printed on site on the Testo fast printer. In addition to the wide range of standard probes with cable, a wireless radio probe can be used simultaneously, if required.

• Fast-action probes for every application
• Wireless measurement with radio probes possible (optional)
• Measurement data printout on site on the Testo fast printer
• TopSafe, the indestructible protection case (optional)
• Minimum/maximum value memory
• Large backlit display
• Auto-Hold automatically recognises full-scale value
• Audible alarm (adjustable alarm limits)
• Measurement parameters °C, °F, °R

0563 1051 105 T-handle Thermometer by Testo

The robust food thermometer with exchangeable measurement tips for monitoring measurements in abattoirs, refrigerated storerooms, trucks etc.

• 2 user-defined limit values, visual or audible alarm
• Built-in display illumination
• Audible key feedback
• 1 line display
• Waterproof (IP 65) and robust
• Standard measurement tip 100 mm
• Frozen food tip 90 mm
• Long measurement tip 200 mm
• Easy-to-change measurement tips

0563 1080 108 Type K Waterproof Food Thermometer by Testo

In the food industry, temperature measurements are part of the daily routine. The quality of the products can only be tested and guaranteed by precise measurements. And this is also the only way to fulfil HACCP regulations.The testo 108 carries out spot-check measurements in seconds. Whether in the transport and storage of foods, in restaurants, in large kitchens or in chain restaurants.

Thanks to the softcase (protective cover). It is insensitive to moisture and water, and is safe from damage due to impact or dirt. Wherever temperature needs to be recorded, this instrument measures everything which is necessary.

• Easy operation and handling
• Instrument and probe waterproof (IP67)
• Conform to HACCP and EN 13485
• Universally applicable

0563 2063 206 pH3 Instrument Kit by Testo

The testo 206 series is ideally suited for applications in liquid and semi-solid media. The instruments stand out thanks to the combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free and insensitive to dirt.

The automatic final value recognition supports the user during measurement. The protective cover TopSafe provides the instruments with the protection class IP68, it is dishwasher-safe, hygienic and protects the measuring instrument from dirt, water and impact.

The testo 206-pH1 is specially designed for fast pH checks in liquids.

The testo 206-pH2 is ideally suited for pH measurement in semi-solid and protein-rich foods such as jellies, creams, cheese, fruit etc.

The testo 206-pH3 is equipped with a BNC socket which allows the connection of any pH probes to the instrument, depending on the application. This makes the instrument universally applicable.

Kit includes:

• One-hand pH/°C measuring instrument
• pH3 probe head with BNC interface
• TopSafe
• Belt/wall holder

• Ideally suited to applications in liquid and semi-solid media (e.g. in the food sector)
• Built-in temperature sensor
• Maintenance-free gel electrolyte
• Robust, waterproof and dishwasher-safe protective cover (TopSafe, protection class IP65)
• Automatic final value recognition (Auto-hold)
• Two-line display
• 1, 2, or 3-point calibration possible

0563 8282 826-T2 Food IR Thermometer with Laser, includes TopSafe by Testo

the testo 826 series has just been optimized. A higher resolution thanks to the new processor ensures even more accurate measurement results. This allows the temperature to be recorded to an accuracy of 0.1 °C. The min./max. display shows the limit values of the last measurement. You can measure and monitor the temperature of the goods reliably and safely.

• Non-contact measurement of surface temperature, ideally suitable for the food sector
• 6:1 optics for fast and accurate measurement
• 1-point laser measurement spot marking
• Combined instrument with infrared and penetration measurement
• Two adjustable limit values
• Waterproof and robust thanks to dishwasher-safe protective cover TopSafe, according to protection class IP65
• Hold function and display of min./max. values

The advantages:

• Always monitor, measure and document temperature accurately, cleanly and quickly.
• Fulfil HACCP regulations, and be able to provide proof at any time.
• Maintain the cold chain in storage and transport.
• Reduce the quantities of spoiled goods and use resources efficiently.
• Measuring instruments calibrated according to strict regulations.
• Conform to HACCP as well as EN 13485.

0572 6560 174H Mini Temperature/RH Data Logger, 2 channels, includes locking wall holder & batteries by Testo

The mini data logger for temperature and humidity, testo 174H, is ideal for monitoring temperature and humidity sensitive goods in storage. The testo 174H also monitors building climate, continuously, securely and unobtrusively. The free software ComSoft testo 174 allows fast programming of the data logger and easy analysis.

• Humidity sensor with long-term stability
• High data integrity, even with empty battery
• Large measurement data memory
• Display of the current temperature or humidity value
• Large measuring range
• Compact and robust
• Issue of alarms via display
• Data transfer to the PC via USB interface
• Low-cost temperature and humidity monitoring for living, work and storage rooms
• Easy readout of the data and transfer to a PC via Testo USB interface

Measuring Range: -60 to 1000°C