Testo, Test and Measurement

0646 0108 Self-adhesive Temperature Strips +37 to +65 °C (pack of 10) by Testo

Testoterm self-adhesive temperature measurement strips are thin, temperature-sensitive pieces of film which change color when the temperature exceeds a specific value. This makes them ideal for monitoring the temperature of products and processes where the temperature is not allowed to exceed a certain limit, i.e. for moving or small objects like circuit boards / long-term monitoring of storage/transport temperatures and in laboratories/automobile technology/aviation/astronautics.

The temperature strips in action

The strips are available in booklets of 10. They are peeled off and applied to the object's surface.

The strips have a temperature scale ranging from +98.6 to +149 °F which is divided into little white boxes. As soon as a specific temperature has been exceeded, the strip changes color in the relevant boxes within 2 - 3 seconds.

The temperature strips change color irreversibly when a certain temperature has been exceeded. The color does not change back. This allows you to see that critical thresholds have been exceeded even when temperatures have dropped again. Ideal for use in storage and transport.

We are also able to provide you with temperature strips for monitoring higher temperatures. The following measuring ranges are available:

• +159.8 ... +230 °F
• +240.8 ... +309.2 °F
• +321.8 ... +399.20 °F
• +399.2 ... +500 °F

• Measuring range +98.6 °F to +149 °F
• Self-adhesive temperature strips
• Change color in 2 - 3 sec when thresholds are exceeded
• Ideal for monitoring temperature of small/moving objects / long-term monitoring of transport/storage temperatures

Includes:

testoterm temperature measurement strips for measurement ranges from +98.6 °F to +149 °F, 10 strips per booklet.

Please note: special prices available for orders exceeding 5 booklets.

0646 0916 Self-adhesive Temperature Strips +71 to +110 °C (pack of 10) by Testo

testoterm thermometer strips are self-adhesive foils with temperature sensitive elements for temperature control and monitoring compressors, for example.

• Measuring range +71 °C to +110 °C
• Self-adhesive temperature strips
• Change color in 2 - 3 sec when thresholds are exceeded
• Ideal for monitoring temperature of small/moving objects / long-term monitoring of transport/storage temperatures

Includes:

testoterm temperature measurement strips for measurement ranges from +71 °C to +110 °C, 10 strips per booklet.

Please note: special prices available for orders exceeding 5 booklets.

0646 1724 Self-adhesive Temperature Strips +116 to +154 °C (pack of 10) by Testo

Testoterm self-adhesive temperature measurement strips are thin, temperature-sensitive pieces of film which change their color when the temperature exceeds a specific value. This makes them ideal for monitoring the temperature of products and processes where the temperature is not allowed to exceed a certain limit, i.e. for moving or small objects like circuit boards, for long-term monitoring of storage and transport temperatures, in laboratories, in automobile technology, in aviation and in astronautics.

The temperature strips in action

The temperature strips are available in booklets of 10. The strips are peeled off and applied to the object you wish to measure.

The strips have a temperature scale ranging from +116 °C to +154 °C which is divided into little white boxes. As soon as a specific temperature has been exceeded, the strip changes color in the relevant boxes in the space of 2 to 3 seconds. The temperature steps for the individual boxes are as follows: 116 °C, 121 °C, 127 °C, 132 °C, 138 °C, 143 °C, 149 °C and 154 °C.

When the strips change color, they do so irreversibly. When a certain temperature has been exceeded, the color does not change back again when the temperature returns to previous levels. This allows you to see that critical thresholds have been exceeded even when the temperatures have returned to the levels they were before the limit was reached. This makes them ideal for use in storage and transport.

We are also able to provide you with temperature strips for monitoring other temperature ranges. The following measuring ranges are available:

• +37 ... +65 °C
• +71 ... +110 °C
• +161 ... +204 °C
• +204 ... +260 °C

• Measuring range +116 °C to +154 °C
• Self-adhesive temperature strips
• Change color in 2 - 3 sec when thresholds are exceeded
• Ideal for monitoring temperature of small/moving objects / long-term monitoring of transport/storage temperatures

Includes:

testoterm temperature measurement strips for measurement ranges from +116 °C to +154 °C, 10 strips per booklet.

Please note: special prices available for orders exceeding 5 booklets.

0646 2532 Self-adhesive Temperature Strips +161 to +204 °C (pack of 10) by Testo

Testoterm self-adhesive temperature measurement strips are thin, temperature-sensitive pieces of film which change their color when the temperature exceeds a specific value. This makes them ideal for monitoring the temperature of products and processes where the temperature is not allowed to exceed a certain limit, i.e. for moving or small objects like circuit boards, for long-term monitoring of storage and transport temperatures, in laboratories, in automobile technology, in aviation and in astronautics.

The temperature strips in action

The temperature strips are available in booklets of 10. The strips are peeled off and applied to the object you wish to measure.

The strips have a temperature scale ranging from +161 °C to +204 °C which is divided into little white boxes. As soon as a specific temperature has been exceeded, the strip changes color in the relevant boxes in the space of 2 to 3 seconds. The temperature steps for the individual boxes are as follows: 161 °C, 169 °C, 172 °C, 177 °C, 184 °C, 189 °C, 197 °C and 204 °C.

When the strips change color, they do so irreversibly. When a certain temperature has been exceeded, the color does not change back again when the temperature returns to previous levels. This allows you to see that critical thresholds have been exceeded even when the temperatures have returned to the levels they were before the limit was reached. This makes them ideal for use in storage and transport.

We are also able to provide you with temperature strips for monitoring other temperature ranges. The following measuring ranges are available:

• +37 ... +65 °C
• +71 ... +110 °C
• +116 ... +154 °C
• +204 ... +260 °C

• Measuring range +161 °C to +204 °C
• Self-adhesive temperature strips
• Change color in 2 - 3 sec when thresholds are exceeded
• Ideal for monitoring temperature of small/moving objects / long-term monitoring of transport/storage temperatures

Includes:

testoterm temperature measurement strips for measurement ranges from +161 °C to +204 °C, 10 strips per booklet.

Please note: special prices available for orders exceeding 5 booklets.

0646 3341 Self-adhesive Temperature Strips +204 to +260 °C (pack of 10) by Testo

Testoterm self-adhesive temperature measurement strips are thin, temperature-sensitive pieces of film which change their color when the temperature exceeds a specific value. This makes them ideal for monitoring the temperature of products and processes where the temperature is not allowed to exceed a certain limit, i.e. for moving or small objects like circuit boards, for long-term monitoring of storage and transport temperatures, in laboratories, in automobile technology, in aviation and in astronautics.

The temperature strips in action

The temperature strips are available in booklets of 10. The strips are peeled off and applied to the object you wish to measure.

The strips have a temperature scale ranging from +204 °C to +260 °C which is divided into little white boxes. As soon as a specific temperature has been exceeded, the strip changes color in the relevant boxes in the space of 2 to 3 seconds. The temperature steps for the individual boxes are as follows: 204 °C, 210 °C, 216 °C, 224 °C, 232 °C, 241 °C, 249 °C, 254 °C and 260 °C.

When the strips change color, they do so irreversibly. When a certain temperature has been exceeded, the color does not change back again when the temperature returns to previous levels. This allows you to see that critical thresholds have been exceeded even when the temperatures have returned to the levels they were before the limit was reached. This makes them ideal for use in storage and transport.

We are also able to provide you with temperature strips for monitoring other temperature ranges. The following measuring ranges are available:

• +37 ... +65 °C
• +71 ... +110 °C
• +116 ... +154 °C
• +161 ... +204 °C

• Measuring range +204 °C to +260 °C
• Self-adhesive temperature strips
• Change color in 2 - 3 sec when thresholds are exceeded
• Ideal for monitoring temperature of small/moving objects / long-term monitoring of transport/storage temperatures

Includes:

testoterm temperature measurement strips for measurement ranges from +204 °C to +260 °C, 10 strips per booklet.

Please note: special prices available for orders exceeding 5 booklets.

Measuring Range: 0 to +40 °C; +2 to +14 pH

Measuring Range: -10 to +80 °C; 0 to +14 pH

0699 6445 1 6445-1 Flowmeter - Totalizer 80m/sec by Testo

• Calibrated to air speed in m/s (calculates the volumetric flow rate Nm³/h if the diameter is entered)
• Choice of measuring range: up to 80 Nm/s or up to 150 Nm/s
• Bar probe design: versatile use for diameters from DN 50 to DN 300
• Output signals: Analog output: 4 to 20 mA (4-wire), Pulse output, RS232 digital output
• Including 5-point calibration certificate
• Robust, thermal silicon chip sensor
• Optional display: Totalizer function (sum display)/speed display/physical units (including volumetric glow rate Nm³/h) can be selected via software

0699 6445 2 6445-2 Flowmeter - Totalizer 80m/sec by Testo

• Calibrated to air speed in m/s (calculates the volumetric flow rate Nm³/h if the diameter is entered)
• Choice of measuring range: up to 80 Nm/s or up to 150 Nm/s
• Bar probe design: versatile use for diameters from DN 50 to DN 300
• Output signals: Analog output: 4 to 20 mA (4-wire), Pulse output, RS232 digital output
• Including 5-point calibration certificate
• Robust, thermal silicon chip sensor
• Optional display: Totalizer function (sum display)/speed display/physical units (including volumetric glow rate Nm³/h) can be selected via software

0699 6446/1 6446 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor

0699 6446/11 6446 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor

0699 6446/12 6446 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor

0699 6446/13 6446 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor

0699 6446/14 6446 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor

0699 6446/15 6446 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor

0699 6446/16 6446 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor

0699 6446/17 6446 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor

0699 6446/2 6446 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor