Test Products International, Test and Measurement

50 AC Safety Volt Check 50-1,000 Volts AC with Audio and Visual Alert by Test Products International

TPI AC Volt Testers. Determine the presence or absence of AC voltage without disconnecting the system in question.

The AC Volt 50 is a hand held device for determining the presence or absence of AC voltage in insulated wires, wall receptacles, fuses, junction boxes, switches, and any other voltage carrying electrical system. It is not necessary to disconnect the system in question because no contact is required for operation and current flow is not necessary to locate voltage. Simply touch the plastic tip to a connection point or move it along an insulated wire. If AC voltage is present, The AC Volt 50 will sound an audio alert and an LED light in the probe tip will glow bright red. The illumination will stop at a break in the circuit or wire, and this allows the AC sensor to be used as a troubleshooting instrument.

Features

• Prevent electrical shocks
• Non-contact detection of 50 to 1,000 VAC
• Troubleshoot electrical circuits
• No switch required. Always ready for use. Competing products require an ON/OFF switch
• Audible buzzer and visual alarm, red glow indicates presence of 50-1,000 V
• Uses 2 AAA batteries Common and inexpensive. Competing producs require more expensive camera batteries
• Lifetime warranty
• UL listed

Applications

• Wires
• Wall Receptacles
• Fuses
• Junction Boxes
• Switches
• Defective Grounds
• Any other Voltage
• Carrying Electrical System

TPI-5000A Deluxe Adpater Connector Kit by Test Products International

TPI-3000A Universal Cables & Connector Kit. Technicians and engineers turn to TPI for their connecting needs. With the TPI-3000A and TPI-5000A kits, technicians can create connections on the spot in seconds.

Features

• Includes 11 types of connectors for male and female adapters
• Simply screw on any combination of 35 connectors to any of the six universal interfaces with no soldering or crimping needed
• Reusable connectors can be used over and over in different combinations to fit and assist customizing the installation
• Works with universal cables GEX-60 (36"), GEX-48 (48"), and GEX-75 (72")
• Connector bodies are silver-plated machine brass with Teflon insulation
• Hard plastic case protects and organizes the individual pieces

TPI-5010 Universal Adapter Cable Kit by Test Products International

For use with TPI-3000A and TPI-5000A adapter kits

• Provides the functionality of an entire set of cables
• Creates the cable of your choice using the universal cable and any combination of connectors from the kits noted above
• No soldering, no crimping - cable may be used over and over in different combinations
• Soft insulation makes cable flexible and easy to handle
• Kit includes 6ea. 48" universal cables and wall rack

505 Digital Hand Tachometer by Test Products International

Use the 505 photo / contact tachometer to determine RPM and surface speed. The 505 is a combination photo and contact tachometer that also measures surface speeds of belts and wheels.

Features

• Non-contact (photo) and contact RPM and surface speed
• Wide Measuring Range: 0.5 to 30,000 RPM
• Last measurement, maximum measurement and minimum measurement automatically saved and recalled

Applications

• Measure motor input and output shaft speed
• Determine conveyor belt speed
• Confirm fan, motor, and gear RPM
• Measure RPM of flywheels and pumps
• Monitor pulley rotation RPM and turbine speeds

510 Solar Irradiance Meter by Test Products International

The TPI 510 is an easy to use, solar irradiance meter for measurement of not only solar radiation, but all measureable light sources including all visible light. The TPI Solar Meter is state of the art and easy to use. It is designed to measure solar power in W/m² or BTU (ft²*h).

Features

• Measure solar radiation (irradiance)
• Displays results in W/m² or BTU
• 0 to 1999 W/m2 (0 to 634 BTU) range
• Min / Max and Data hold functions
• Convenient, no need to adjust, data displayed clearly
• Measurable light sources, including all visible light
• Overload display "OL" when measurement is out of range
• Select either W/m² or BTU / (ft²*h) units

Applications

• Use to find the optimal angle of inclination for installing solar panels
• Measure light intensity through windows
• Determine the effectiveness of solar film / window tint
• Suitable for measuring the effectiveness of solar film
• Car windows light intensity measurement
• Optimal incident angle for solar panels
• Measurement of the sun s transmission through transparent and film glass

556C1 Digital Air Velocity / Air Flow Meter by Test Products International

Digital vane air velocity, calculate CFM and temperature. The 556 Digital Air Velocity Meter is a state of the art, easy to use instrument designed to provide temperature and air velocity readings as well as calculating CFM.

The 556 Digital Air Velocity Meter is a state of the art, easy to use instrument designed to provide temperature and air velocity readings as well as calculating CFM. The instrument is ruggedly constructed and comes with a 3 Year Guarantee.

Features

• Measure air velocity, air flow and temperature
• Five units of measure for air velocity: (m/s, km/hr, mile/hr, knots, ft/min)
• Two units of measure for air flow: (cfm, cmm)
• Send real time and logged data to a PC via optional A500 interface cable
• Four digit dual line display simultaneously shows air flow and temperature
• Data record displays minimum, maximum and average readings
• Data log up to 1000 readings in 1 second to 999 second intervals

Applications

• Air velocity measurements in heating, ventilation and air conditioning systems
• Air duct analysis
• Fume hoods
• Floor registers
• Exhaust grills

Standard Accessories

• TPI 556 Instrument
• Rubber Boot
• Soft Carrying Case
• Batteries
• Instruction Manual

Optional Accessories

• Serial Computer Interface RS232

565C1 Hotwire Air Velocity Meter by Test Products International

Features

• Air flow 0.2 to 20 m/s (Also reads km/s, ft/min, knots/h, miles/h)
• Temperature -5° to 175° F (-20° to 80°C)
• Data record function for maximum and minimum temperature and air velocity reading
• Download to a computer using the RS-232 port and optional A500 cable. (The 565 uses Microsoft Hyper Terminal to download and display air velocity and temperature on your PC.)
• 39" cable length, hard wired, telescoping tip expands from 10" to 37" (cable length decreases to 12" at full extension)
• Data Hold
• Auto Power Off
• Protective Boot Included

58-012-1M RG58/U, BNC Male to BNC Male, 12 inch by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

58-024-1A RG58/U, BNC Male to BNC Male, 24 inch by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

58-024-1M RG58/U, BNC Male to BNC Male, 24 inch by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

58-036-1A RG58/U, BNC Male to BNC Male, 36 inch by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

58-036-1M RG58/U, BNC Male to BNC Male, 36 inch by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

58-048-1A RG58/U, BNC Male to BNC Male, 48 inch by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

58-048-1M RG58/U, BNC Male to BNC Male, 48 inch by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

58-060-1A RG58/U, BNC Male to BNC Male, 60 inch by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

58-060-1M RG58/U, BNC Male to BNC Male, 60 inch by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

58-072-1M RG58/U, BNC Male to BNC Male, 72 inch by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

58-1200-1M RG58/U, BNC Male to BNC Male, 100 Feet by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

58-180-1M RG58/U, BNC Male to BNC Male, 15 Feet by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

58-600-1M RG58/U, BNC Male to BNC Male, 50 Feet by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

58-900-1M RG58/U, BNC Male to BNC Male, 75 Feet by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

59-012-1M RG59/U, BNC Male to BNC Male, 12 inch by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

59-024-1M RG59/U, BNC Male to BNC Male, 24 inch by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged

59-036-1M RG59/U, BNC Male to BNC Male, 36 inch by Test Products International

50 Ohm, 75 Ohm, 93 Ohm. TPI BNC to BNC coax cable assemblies include: RG58/U (molded and assembled), RG59/U and RG62/U.

Features

• UL Listed Cable: Ensures quality and consistency in the cable construction.
• Boot is molded to cable connector for added strength: Limits the amount of bending the cable is exposed to at the connector to prevent cable breakage.
• Gold center pins: Ensures that there is a high quality connection maintaining the best return loss in high definition applications.
• Machined Brass Connectors: Unlike die-cast connectors, machined brass connectors have more precise tolerances, strength and positive mating meaning low signal loss for precise video and data applications.
• Boot is molded to cable connector for added strength
• 95% shielding
• 80°F temperature rating
• Multiple lengths up to 100 feet
• Individually bagged