ScichemTech, Test and Measurement

Length(MM) & Diameter : 265 X Ø18.00
Temperature: -100°C ~ +400°C OR -148°F ~ +752°F

SCT-108.002.60 SCT-STAR LCD Digital Multi - Thermometer by ScichemTech

Includes:

• Temperature Probe (213 mm)
• Batteries
• Instruction

Features:

• A complete portable SCT meter for temperature measurements.
• Auto shut-off.
• Temperature sensing time 1 second .
• 213mm. Stainless steel sensor probe.
• Max/min (°f/°c) memory recalling function.
• Temperature unit °f/°c selectable.
• Data hold/test function selectable.
• Battery operated with low battery indication

SCT-108.003.04 SCT BEN-pH-4 Benchtop GLP pH Meter by ScichemTech

SCT (GLP) good laboratory practice benchtop pH/ORP/Temp meter suitable for routine laboratory use.

Equipped with flexible electrode holder & quick operation guide easier to use.

Instrument rating 0.01.

Includes:

• Flexible electrode holder
• pH/ATC three-in-one combination electrode
• pH standard buffer solution 4.00, 7.00, 10.01(50 ml)
• 9v power adapter
• RS-232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize pH buffer solution. User can choose anyone from three series of standard buffer solutions: Europe & USA series, & NIST series
• SCT dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards

SCT-108.003.06 SCT BEN-pH-6 pH/Conductivity Benchtop Meter by ScichemTech

SCT benchtop pH/Conductivity meter is the most widely used pH and conductivity double parameter measurement meters.

Resolution pH 0.01/Conductivity 0.1.

Includes:

• Flexible electrode holder
• pH/ATC three-in-one combination electrode
• Plastic conductivity electrode
• pH standard buffer solution 4.00, 7.00, 10.01 (50 ml)
• 1413 us/cm conductivity standard solution 50 ml
• 9v power adapter
• RS-232 communication cable
• Communication software disk
• Operation manual
• Packing list

Features:

• SCT benchtop meter is designed to measure conductivity, pH and ORP.
• The most widely used pH + conductivity double-parameter measurement meter.
• Meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Automatically recognize pH buffer solution. User can choose anyone from three series of standard buffer solutions: Europe & USA series, & NIST series
• Adopt advanced and original conductivity measurement technology, use 1pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μs/cm ~ 200ms/cm by using only one-point calibration.
• Option to switch conductivity, TDS, salinity and resistivity.
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.005.12 SCT-ORP-MAXI ORP Maxi Controller by ScichemTech

Includes:

• ORP sensor
• Fixation clamps
• Calibration solution
• Instruction manual

Features:

• SCT-ORP (Oxidation Reduction Potential) MAXI CONTROLLERS are designed with creativeness to get the elegance and produced with proper quality, and meets the specifications for the Water related applications with high level performance.
• SCT -ORP (Oxidation Reduction Potential) MAXI CONTROLLERS are supplied with the suitable electrode with SCT standard 10 meters cable. (New series).
• SCT-ORP (Oxidation Reduction Potential) MAXI CONTROLLERS are an industrial instrument used for online analysis and monitoring.
• SCT-ORP (Oxidation Reduction Potential) MAXI CONTROLLERS are made in a attractive pleasant colour with a Large and Clear blue white LCD Display
• SCT-ORP (Oxidation Reduction Potential) MAXI CONTROLLERS are Microprocessor based controllers, which gives stable and accurate readings.
• SCT-ORP (Oxidation Reduction Potential) MAXI CONTROLLERS uses Low power consumption and produces less internal heat.
• SCT-ORP (Oxidation Reduction Potential) MAXI CONTROLLERS has an isolated 4-20 mA current output.
• SCT-ORP (Oxidation Reduction Potential) MAXI CONTROLLERS proved to work continuously in any harsh environmental conditions for the In line measurement and control of accurate ORP value and it give the the direct measurement and readings

SCT-108.002.09 SCT CADY pH/ORP/Conductivity/TDS/Salinity/Resistivity/Temp Meter by ScichemTech

Includes:

• Plastic pH/ATC three-in-one combined electrode
• Plastic ORP combined electrode
• Plastic conductivity electrode
• pH standard buffer solution
• 1413us/cm conductivity standard solution
• Screw driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for ph, ORP and conductivity measurements.
• Multi-parameter meter, equipped with ph electrode, ORP electrode and conductivity electrode, automatic identification of electrode by meter.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function setup, self-diagnose information, automatic power-off and low voltage display.
• Automatic identification of 12 ph standard buffer solutions, three options of standard buffer solutions: Europe and America series & nist series
• Able to set pH measurement modes of high purity water and pure water with ammonia.
• Automatic identification of 7 conductivity standard calibration solutions, two options of standard calibration solutions: Europe and America series.
• Adopt advanced conductivity measurement technology, use conductivity electrode of constant k=1, only need one point calibration and meet the measurement precision requirement of 0.5μs/cm ~ 200 ms/cm.
• Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
• SCT meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.003.19 SCT-BEN-HARD-1 Benchtop Water Hardness Meter by ScichemTech

Includes:

• Water hardness electrode stirring type electrode holder
• Water hardness calibration solution (B1,B2 & B23) 20 ml
• Test cup pedestal in a solution for water hardness electrode tools for filling reference solution
• WH - link communication software
• RS-232 communication cable
• Operation manual

Features:

• SCT benchtop meter is for measurement of water hardness (the total concentration of calcium ion and magnesium ion).
• Electrode adopts water hardness combination electrode with patent structure. It consists of measurement electrode, reference electrode and temperature probe. Replaceable measuring head, steady potential, fast response, easy to use.
• Meter adopts intelligent chip design, automatic calibration, automatic temperature compensation, time display, data storage RS232 output, etc.
• Ability to switch among eight units: mmol/l, mg/l (caco3), mg/l (cao), mmol/l (boiler) and mg/l (ca). Three options of three units: °FH France °DH Germany and °EH UK from WH-link communication software
• Equipped with B1 B2 and B3 calibration solutions.
• Equipped with WH-link communication software, connect testing data of meter to computer.
• SCT benchtop meter meets: ISO9001 & CE standards.

SCT-108.005.11 SCT-pH-MAXI pH Maxi Controller by ScichemTech

Includes:

• pH sensor
• Fixation clamps
• Calibration solution
• Instruction manual

Features:

• SCT- pH (potential of Hydroxide) MAXI CONTROLLERS are designed with creativeness to get the elegance and produced with proper quality, and meets the specifications for the Water related applications with high level performance.
• SCT- pH (potential of Hydroxide) MAXI CONTROLLERS are supplied with the suitable electrode with SCT standard 10 meters cable.(new series).
• SCT- pH (potential of Hydroxide) MAXI CONTROLLERS are an industrial instrument used for online analysis and monitoring.
• SCT- pH (potential of Hydroxide) MAXI CONTROLLERS are made in a attractive pleasant colour with a Large and Clear blue white LCD Display
• SCT- pH (potential of Hydroxide) MAXI CONTROLLERS are Microprocessor based controllers, which gives stable and accurate readings.
• SCT- pH (potential of Hydroxide) MAXI CONTROLLERS uses Low power consumption and produces less internal heat.
• SCT- pH (potential of Hydroxide) MAXI CONTROLLERS has an isolated 4-20 mA current output.
• SCT- pH (potential of Hydroxide) MAXI CONTROLLERS proved to work continuously in any harsh environmental conditions for the In line measurement and control of accurate pH value and it give the direct measurement and readings.

SCT-108.002.05 SCT-BUCK Portable pH/ORP/Temp Meter by ScichemTech

Includes:

• Plastic pH/ATC three-in-one combined electrode
• Plastic ORP combined electrode
• pH standard buffer solution,220mv ORP
• Standard solution
• Screw driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable sct meter for pH & ORP measurements.
• Built-in microprocessor chips, intelligent functions such as automatic calibration,automatic temperature compensation, data storage, function set-up, self-diagnose information, automatic power-off and low voltage display.
• Double-parameter meter, equipped with three-in-one combination ph electrode and ORP electrode, automatic identification of electrode by meter.
• Automatic identification of 12 ph standard calibration solutions, three options of standard buffer solutions: europe, america series &nist series.
• Able to set pH measurement modes of high purity water and pure water with ammonia
• Sct meter meets ISO9001:2000, CE standards and water proof IP57.

SCT-108.002.07 SCT-BUD Portable pH/ORP/DO Meter by ScichemTech

Includes:

• Plastic pH/ATC three-in-one combined electrode
• Do electrode
• pH standard buffer solution
• Membrane cap
• Do electrode inner solution
• Cathode polishing paper
• Screw driver
• Spare batteries
• Operation manual
• Carrying case.

Features:

• A complete portable SCT-meter for pH, ORP and dissolved oxygen measuements.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function set-up, self-diagnose information, automatic power-off and low voltage display.
• Double-parameter meter, equipped with ph electrode and dissolved oxygen electrode, automatic identification of electrode by meter.
• Automatic identification of 12 pH standard buffer solutions, three options of Standard buffer solutions: Europe and America series & nist series.
• Able to set pH measurement modes of high purity water and pure water with Ammonia.
• Measurement mode of dissolved oxygen has the function of automatic temperature compensation, automatic salinity compensation and manual air pressure compensation.
• New polarographic type dissolved oxygen electrode can measure temperature, salinity and dissolved oxygen simultaneously, equipped with special dissolved oxygen electrode calibration set, polarization only for 3~5 min.
• SCT meter meets ISO9001:2000, ce standards and water proof IP57.

SCT-108.001.30 SCT-THER-PEN-1 LCD Digital Multi-Thermometer by ScichemTech

Features:

• Reliable SCT Tester for Temperature measurement.
• Small design and display.
• Option to select °F/°C.
• Option to hold / test data.
• Auto shut-off in 60 minutes.
• Sensing time 1 second .
• 133mm. Stainless steel sensor probe protective plastic sleeve with clip.
• Battery operated with low battery indicator.

SCT-108.002.01 SCT-AIRA Portable pH Meter by ScichemTech

Includes:

• Portable pH Meter
• Plastic pH/ATC Three-in-One combination Electrode
• pH standard buffer solution (pH4.00, pH7.00 and pH10.01/50ML)
• Screw-Driver
• Spare batteries
• Operation manual
• Carrying case

Features:

• A complete portable SCT-meter for pH, ORP measurements.
• Built-in microprocessor chips, intelligent functions such as automatic calibration, automatic temperature compensation, data storage, function set-up, self-diagnose information, automatic power-off and low voltage display.
• Automatic identification of 12 pH standard calibration solutions, three options of standard buffer solutions: Europe and American series and NIST series.
• Able to set pH measurement modes of high purity water and pure water with ammonia.
• Calibration solution and portable case and suited in field and on site.
• SCT meter meets ISO 9001:2000, CE standards and water proof IP57.

SCT-108.001.32 SCT-THER-PEN-3 Waterproof Digital Pocket Multi-Stem Thermometer by ScichemTech

Features:

• Reliable SCT - Waterproof Tester for Temperature measurement.
• Good - Temperature - max/min range.
• Option to select °F/°C.
• Option to select test / hold date.
• Sensing time 1 second.
• Stainless steel 133 mm probe.
• Protective plastic sleeve with clip for stainless steel.
• Battery operated with low battery indicator.

SCT-108.005.13 SCT-EC-MAXI EC (Electrical Conductivity) Maxi Controller by ScichemTech

Includes:

• Conductivity sensor
• Fixation clamps
• Calibration solution
• Instruction manual

Features:

• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS are designed with creativeness to get the elegance and produced with proper quality, and meets the specifications for the Water related applications with high level performance.
• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS are supplied with the suitable electrode with SCT standard 10 meters cable. (New series) 3 ranges of EC can be adjusted in a single controller and the ranges can be switched easily.
• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS are an industrial instrument used for online analysis and monitoring.
• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS are made in a attractive pleasant colour with a Large and Clear blue white LCD Display
• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS are Microprocessor based controllers, which gives stable and accurate readings.
• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS uses Low power consumption and produces less internal heat.
• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS has an isolated 4-20 mA current output.
• SCT-EC (Electrical Conductivity) MAXI CONTROLLERS proved to work continuously in any harsh environmental conditions for the in line measurement and control of accurate EC value and it give the direct measurement and readings.

SCT-108.002.NA Flexible Electrode Holder by ScichemTech

• Flexible electrode holder
• Nice appearance of the arc-type bracket
• You can turn 360 degrees
• Vertical lift

SCT-108.007.02 SCT-TANK-2 SCT Dosing Tank (LDPE) - 200 Litre - 100 Litre by ScichemTech

SCT dosing tanks are with red screw fitting lid with a raised section to mount dosing pumps, mixers, level sensors etc. Made of high quality LDPE (low density polyethylene) cylindrical in shape

SCT-108.002.61 SCT-STASH LCD Waterproof Thermometer by ScichemTech

Includes:

• Batteries
• Instruction

Features:

• A complete portable SCT meter for temperature measurements.
• Auto shut-off.
• 265mm. Stainless steel sensor probe
• max/min (°f/°c) memory recalling function
• Temperature unit °f/°c selectable
• Data hold/test function selectable
• Optional PVC holster
• Rubber coated housing
• Temperature sensing time 1 second.
• Battery operated with low battery indication.

SCT-108-002-17 SCT KEVIN Portable Suspended Solids Analyzer by ScichemTech

Includes:

• Sensor
• Battery
• Instruction Manual

Features:

• A complete portable SCT meter for suspended solids measurements.
• SCT - Kevin meter designed to measure the suspended solids using optical sensor.
• Meter is optimized for MLSS and RAS data logging and download to spread sheet through RS232 serial port.
• Independent calibration for MLSS and RAS.
• Water proof with IP57 rating and large backlight graphical display.
• Real time SS concentration for process control.
• SCT Kevin meter can also be used to measure sludge blankets in clarifiers memory of safety
• Meter operates with rechargeable batteries and charges for 12 hours.
• Auto shut-off.