$750 - $1000, Test and Measurement

0563 3100 01 310 Residential Analyzer Kit by Testo

The testo 310 has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated. The instrument stands out thanks to its easy handling and simple menu structurey. You can read off the measurement values confidently and conveniently from the well-lit display, even in bad light conditions. The fuels are stored not just as numbers, but are each described. At the top edge of the clear display, the symbols for the different measurement menus are always in view. The display and the dirt-insensitive keypad are clearly structured. Operation is very easy even if you only have one hand free.

Kit Includes:

• testo 310 analyzer
• probe & hose
• silicon tubing
• extra particulate filters (5)
• pressure plugs (5)
• AC power supply/recharger (USB)
• calibraton certificate
• hard case

• Robust and light instrument for daily use
• 30 seconds sensor zeroing
• O2 and CO measurement
• Integrated magnets for easy fixing to burner

Applications:

• Flue gas measurement
• Draught measurement
• Ambient CO measurement
• Pressure measurement

0563 3104 01 310 II - Flue Gas Analyzer by Testo

The new testo 310 II flue gas analyzer combines simple functions with a high level of measurement accuracy, and is perfect for all basic measurements on heating systems. Long battery lifetimes of more than eight hours guarantee the analyzer is ready. Simultaneous, individual measurement and display of the measurement parameters in the instrument's high-resolution display are easily possible. The display can be easily configured via the testo Smart App and translates to the 310 II. Its easy handling and compact design make the testo 310 II a robust tool for daily work – even when things get rough.

The printer with Bluetooth® interface, specially developed for the testo 310 II, allows you to create clear reports on site as required. The current measurement value can be printed out of any measurement menu during or after the measurement. Via the simple connection to the testo Smart App, further measurements as well as digital documentation, data transfer and digital customer data management can be performed simultaneously. The testo 310 II offers all advantages of electronic flue gas measurement in high quality at a perfect cost-benefit ratio.

• Simultaneous, individual measurement and display of all relevant measurement parameters (O2, CO, CO2, flue gas and ambient temperature, CO environment, draft and pressure). Display configurable via the testo Smart App.
• Simultaneous, additional measurements via the testo Smart App (e.g. gas flow pressure, flow and return temperature)
• Easy and intuitive menu guidance
• Data documented and sent digitally via testo Smart App
• Digital customer data management via testo Smart App
• Rechargeable lithium battery for over 8 hours of operation
• Robust construction
• Sensor zeroing in 30 seconds

0563 4400 440 Hot Wire Kit by Testo

With the testo 440 hot wire kit, all IAQ-related parameters in ventilation ducts can be measured and documented. The testo 440 air velocity & IAQ measuring instrument recognizes probes automatically, and its structured measurement menus simplify the adjustment of air conditioning and ventilation systems. Up to 3 probes can be connected simultaneously to the measuring instrument: a Bluetooth® probe, a wired probe and a temperature probe with Type K thermocouple connector.

In addition to the measuring instrument, the kit also contains a wired hot wire probe and a storage case.

• Structured measurement menu for volume flow
• Parallel determination of flow velocity, volume flow and air temperature
• Integrated telescope that can be extended to 0.85 m, with scaling, makes it easy to carry out measurements
• Absolute pressure compensation, internal data storage and USB port for data export
• Can be extended with a large portfolio of digital probes

Kit Includes:

• testo 440 air velocity & IAQ measuring instrument, 3x AA batteries, USB cable and calibration protocol (0560 4401)
• Hot wire probe (Ø 9 mm) with fixed cable (length 1.7 m) including temperature sensor, with telescope (can be extended to 0.85 m) and calibration protocol (0635 1032)
• Basic case for testo 440 and 1 probe

0563 4401 440 16 mm Vane Kit by Testo

With the testo 440 16 mm vane kit, all IAQ-related parameters in ventilation ducts can be measured and documented. The testo 440 air velocity & IAQ measuring instrument recognizes probes automatically, and its structured measurement menus simplify the adjustment of air conditioning and ventilation systems. Up to 3 probes can be connected simultaneously to the measuring instrument: a Bluetooth® probe, a wired probe and a temperature probe with Type K thermocouple connector.

In addition to the measuring instrument, the kit also contains a wired vane probe and a storage case.

• Structured measurement menu for volume flow
• Determination of flow velocity in ventilation ducts
• Built-in telescope which can be scaled up to 0.85 m
• Internal data storage and USB port for data export
• Can be extended with a large portfolio of digital probes

Kit Includes:

• testo 440 air velocity & IAQ measuring instrument, 3x AA batteries, USB cable and calibration protocol (0560 4401)
• Vane probe (Ø 16 mm) with fixed cable (cable length 1.7 m) including telescope (can be extended to 0.85 m) and calibration protocol (0635 9532)
• Basic case for testo 440 and 1 probe

0563 7352 735-2 Compact Pro Thermometer with Memory & Software by Testo

The robust and compact measuring instrument with a probe socket for highly accurate Pt100 probes and two sockets for fast-action thermocouple probes. Readings from up to three additional temperature probes can be displayed in the testo 735-2 measuring instrument's clear display; data transmission is by radio, i.e. wireless. The measurement values can be simultaneously transferred to a PC and stored there. In this way, a total of 6 channels is recorded by the measuring instrument. A system accuracy of 0.05 °C with a resolution of 0.001 °C is reached using the plug-in highly accurate Pt100 immersion/penetration probe. The measuring instrument is therefore ideally suited for use as a working standard. Temperature characteristics are recorded in the instrument and then analysed in graphics and tables on your PC/Notebook. Data is printed on site on the Testo fast printer using infrared. Selectable user profiles, i.e. allocation of specific function buttons to an application facilitate intuitive and fast operation. Individual protocols or measurement series can be stored according to site. Up to 99 sites can be stored in the instrument. The storage cycle is user-defined between 0.5 seconds and 24 hours.

• System accuracy up to 0.05 °C
• Instrument memory for up to 10,000 readings
• PC software for filing, analysing and documenting measurement data (included)
• Displays, saves and prints Delta T, min, max and mean values
• Audible alarm if limit values are exceeded
• Protection class IP65
• Instrument memory for 10,000 readings (testo 735-2)
• PC software for filing and documenting measurement data (testo 735-2)
• Freely selectable storage cycle from 1 second to 24 hours
• Accuracy over the entire measurement range thanks to system adjustment
• The measurement values can be displayed in the instrument and simultaneously transferred to a PC and stored (testo 735-2)

0563 8165 816 Sound Level Meter by Testo

Compared to testo 815, the larger model has additional features which make it ideal for assessors, workplace measurements and for measuring industrial and environmental noise.

• Easy to adjust (adjustment screwdriver included)
• Frequency weighting to characteristic A and C
• Maximum and minimum memory
• Built-in tripod knuckle screw (1/4 inch)
• Switchable time weighting Fast / Slow
• Automatic range switchover
• Backlit display
• Mains unit connection
• BarGraph display
• AC output to connection from recorders and amplifiers
• DC output with 10 mV/dB to connect recorders or dataloggers
• testo 816:
• Time weighting
• Section measurement range
• Frequency weighting
• Current reading
• Automatic range switchover
• Backlit display
• Mains unit connection
• Barograph display
• AC output for connecting recorders and amplifiers
• DC output with 10 mV/dB for connecting recorders or data loggers

0563 8170 816-1 Sound Level Meter by Testo

The testo 816-1 is ideal for sound level measurements at workplaces, in commercial, and public areas. With the touch of a button, the 816-1 can be switched from Slow (1 sec.) to Fast (125 ms). It is also possible to switch between the frequency weighting characteristic curves A and C. Characteristic curve A corresponds to the sound pressure sensitivity of the human ear, while characteristic curve C can evaluate low-frequency components of a noise.

The integrated data store allows the storage of over 31,000 readings. Then download them for additional data analysis and management. The optional sound calibrator allows for easy on-site calibration.

• Meets ANSI S1.4 Type 2 and IEC 61672-1 class 2 performance standards
• Integrated data storage for up to 31,000 readings
• Data management and analysis with included software
• Fast/Slow switchable time weighting
• Backlit numerical and bar graph display
• AC and DC output compatibility
• Frequency weighting A and C

0563 8450 845 Adjustable Focus IR Thermometer, 75:1 optics with aluminium case by Testo

For the first time, surface temperatures with smallest diameters can be measured accurately at short and long distances. The switchable optics for far-field and close focus measurement make this possible. Measurements in the far-field are made with an optical resolution of 75:1. Surface temperatures can thus be measured accurately even at greater distances from the object to be measured. At a distance of 1.2 metres from the object, the measurement point diameter is only 16 mm. A cross laser marks the measurement point exactly. For measurements at a small distance from the object to be measured, the close focus optics provide a measurement point diameter of only 1 mm at a distance of 70 mm! Two laser points mark the measurement point.

• Switchable optics for far-field measurements (75:1) and close focus (1 mm, 70 mm distance)
• Especially bright cross laser sighting for indicating the actual measuring point
• Reference accuracy ± 0.75 °C with super-fast measurement technololgy (scanning 100 ms)
• Backlit display (3-line) showing °C, min./max. values, alarm limit values and degree of emission; additional display with humidity module: %RH, °Ctd
• Optical and audible alarm when limit values are exceeded
• Probe socket for TC probes for determining emissivity
• Instrument memory for 90 measurement protocols
• PC software for archiving and documenting measurement data (included in delivery)
• Tripod fitting for online measurement via USB cable (included in delivery)
• Measurement data documentation on site with Testo report printer
• Aluminium case for instrument and accessories (included)

0564 5701 01 570s Digital Manifold by Testo

With the new testo 570s, we are opening up the future of intelligent long-term measurement on refrigeration and air conditioning systems as well as heat pumps. Digital fault analysis in the testo Smart App allows anomalies to be detected quickly and reliably. And with the world's longest runtime of up to 360 hours and large data memory, testo 570s is ideal for long-term measurements. Behind it is the hybrid system of rechargeable battery (USB-C) and 3 AA batteries.

The large screen of the testo 570s provides a quick overview of all measured values as well as a graphical progress display. For uncomplicated measurement of temperature, vacuum and current, all probes automatically connect to the manifold via Bluetooth. To make measurement even easier, stored programs guide you through the measurement process and enable determination of numerous parameters. The subsequent documentation and sending of data is also possible with just a few clicks in the testo Smart App.

Thanks to high robustness with protection class IP54, testo 570s continuously delivers high performance even under the most difficult conditions.

• Long-term measurement with intelligent error analysis in the testo Smart App
• World's longest battery life of up to 360 hours with rechargeable battery (USB-C) and interchangeable AA batteries (3x)
• Suitable for 90+ refrigerants incl. A3 and A2L
• Highest precision even at low pressure values due to measuring accuracy of 0.25% fs
• All measurement data at a glance and graphical progress display thanks to large display
• High durability with IP54 protection class

0564 5702 01 570s Smart Vacuum Kit by Testo

With the new testo 570s, we are opening up the future of intelligent long-term measurement on refrigeration and air conditioning systems as well as heat pumps. Digital fault analysis in the testo Smart App allows anomalies to be detected quickly and reliably. And with the world's longest runtime of up to 360 hours and large data memory, testo 570s is ideal for long-term measurements. Behind it is the hybrid system of rechargeable battery (USB-C) and 3 AA batteries.

The large screen of the testo 570s provides a quick overview of all measured values as well as a graphical progress display. For uncomplicated measurement of temperature, vacuum and current, all probes automatically connect to the manifold via Bluetooth. To make measurement even easier, stored programs guide you through the measurement process and enable determination of numerous parameters. The subsequent documentation and sending of data is also possible with just a few clicks in the testo Smart App.

Thanks to high robustness with protection class IP54, testo 570s continuously delivers high performance even under the most difficult conditions.

• Long-term measurement with intelligent error analysis in the testo Smart App
• World's longest battery life of up to 360 hours with rechargeable battery (USB-C) and interchangeable AA batteries (3x)
• Suitable for 90+ refrigerants incl. A3 and A2L
• Highest precision even at low pressure values due to measuring accuracy of 0.25% fs
• All measurement data at a glance and graphical progress display thanks to large display
• High durability with IP54 protection class

0572 1765 176 H1 4-Channel Temperature/RH Logger with 2 External Connections for temp-humidity probes (NTC/capacitive) by Testo

When short-term measurements show no anomalies, but the storeroom climate still does not meet the desired requirements, then the testo 176 H1 is the right data logger. It has two connections for external humidity probes which can be positioned in the room according to the individual requirements.

• Waterproof according to IP 65
• integrated USB and SD card interface for reading out data
• Large memory for 2 million measurement values - large, easily legible display
• Parallel temperature and humidity measurement
• Various connectable humidity and temperature probes e.g. for monitoring humidity in storerooms

0572 1766 176 H2 4-Channel Temperature/RH Logger in Metal Housing with 2 External Connecitons for temp-humidity probes (NTC/capacitive) by Testo

When normal humidity logers are too sensitive, the testo 176 H2 comes into its own. The robust metal housing resists mechanical influences and adverse ambient conditions. It has two connections for external humidity probes which can be positioned in the room according to the individual requirements.

• Parallel temperature and humidity measurement with various connectable humidiy and temperature probes for different applications
• Robust metal housing protects from mechanical influences such as impact

0572 2014 160 IAQ Wi-Fi Data Logger (temperature, humidity, CO2, pressure) by Testo

The easy to use testo 160 IAQ Wi-Fi Data Logger is ideal for monitoring indoor air quality. Using internal sensors for temperature, humidity, CO₂, and atmospheric pressure, the testo 160 IAQ accurately determines the air quality of your desired area. The logger comes with a large internal memory that stores 40,000 measurement values, as well as a battery back up to protect your data in the event of a blackout or Wi-Fi network issues.

The testo 160 logger transfers these measurement values wirelessly to the testo Cloud.

On your testo Cloud account, you can configure multiple data loggers and set alarm points, designate authorized users, and set recipients for alarms and reports. This data is accessible at any time from any enabled device, such as a smart phone, tablet, PC or Mac. Additionally, you can preset measurement limits and, if these limits are exceeded, an alarm is immediately provided by text and/or e-mail.

• Wireless measurement value transfer to the testo Cloud
• Measurement values can be monitored on all devices
• Alarm notifications sent by text or e-mail automatically
• Small dimensions for inconspicuous design
• Internal sensors for easy and convenient set up

0572 2024 160 THL Wi-Fi Data Logger (temperature, humidity, lux and UV radiation) by Testo

The testo 160 Museum and Archives Monitoring System monitors ambient conditions in display cases, exhibition rooms, and storage rooms. The loggers transfer measurement values by wireless LAN to the Testo Cloud. You can access all data at any time with the testo Saveris 2 App or by PC/tablet/smartphone and a normal browser. If limit values are exceeded, an alarm is immediately provided by text message and/or email. For light intensity, an alarm can also be triggered if the accumulated light quantity within a day, a week or a month exceeds a limit value.

Testo 160 loggers can be easily hidden within the exhibit area thanks to paintable deco-covers. The temperature and humidity probe with wall bushing is ideal for monitoring small display cabinets in which a data logger cannot be placed.

The testo 160 enables you to check all relevant ambient conditions, in order to safeguard the value of the exhibits and fulfill the obligation of documentation.

• Measurement values transfer by wireless LAN to the Cloud storage
• Measurement values can be accessed on any device with a browser
• Text message or email alarms
• Small devices designed to blend in with surroundings
• Paintable deco-cover to match surrounding color

0618 0071 Flexible Precision Pt100-immersion Probe; Digital; Cable Heat-proof up to +392°F by Testo

Ideal for measurements in laboratories and in industry. The high-precision, flexible temperature probe is equipped with a Pt100 temperature sensor, which features long-term stability. It is impressive when used for these applications:

• Temperature measurements in locations that are difficult to access and in liquids
• Monitoring temperature on engine test beds
• Proof of temperature in the production and storage of sensitive products in places that are difficult to access
• Monitoring process temperatures
• Proof of temperature in the food industry (e.g. for frozen food)
• Checking stationary temperature probes (e.g. in air-conditioning cabinets)

Intelligent calibration concept

With the digital temperature probe you benefit from exceptionally accurate measurement results, because the measuring instrument makes measurement uncertainty a thing of the past. You only need to send the probe in for calibration - so the measuring instrument remains in continuous use. Thanks to the adjustment function in the measuring instrument, the calibration results can be stored at up to six measuring points. This ensures a zero-error display.

• Flexible probe shaft - for measurements in locations that are difficult to access
• For use in laboratories and in industry
• Pt100 sensor for accurate measurement results
• Intelligent calibration concept with zero-error display

Flexible and high-precision for temperature measurements: The digital temperature probe with flexible probe shaft (together with the compatible measuring instrument) is ideal for carrying out measurements in locations that are difficult to access and in liquids.

Delivery Scope

1 x flexible temperature probe (digital) with fixed cable (cable length 1.0 m) and calibration protocol.

Measuring Range: -20 to +70 °C
Measuring Range: 0 to +10 m/s

Measuring Range: +0.6 to +60 m/s

Measuring Range: 0 to +50 °C
Measuring Range: 0 to +5 m/s
Measuring Range: +700 to +1100 hPa

0632 0309 308 Digital Smoke Meter with Bluetooth by Testo

The measuring instrument testo 308 is designed for easy electronic smoke count measurement. It determines the smoke count to one decimal position by constant sampling. The powerful LED backlighting guarantees good legibility even in unfavourable light conditions.

The Li-ion rechargeable battery in the testo 308 can also be used in the Testo flue gas analyzers (testo 327 and testo 330). Thanks to the easy menu structure and the ergonomic pistol grip, the measuring instrument is especially userfriendly. testo 308 achieves a high level of accuracy due to the heating of the measurement spot, thus preventing measurement errors caused by condensation. In addition to this, the infrared interface allows wireless communication with an IrDA printer, a flue gas analyzer and a Pocket PC.

• Easy, self-explanatory menu structure
• Clear segment display
• LED display illumination
• Easy IR printout
• TÜV-tested
• Bluetooth interface (optional)
• Easy exchange of soot filter roll
• Spare battery chargeable separately or in instrument
• Protection class IP40

0632 0314 312 Auto-ranging Digital Manometer (+/- 120" H2O & +/- 86psi) by Testo

testo 312-3, the versatile manometer for the pre-test and main test on gas and water pipelines up to 6 bar. Pressure changes caused by changes in temperature during the measurement are balanced out by the temperature compensation function.

• Clear display with time
• Switchable precision measuring ranges with high resolution
• Alarm when user-defined limit values are exceeded
• Fast reporting of measurement data on site
• DVGW tested

Measuring Range: 0 ... +1 Vol. % CO2 0 ... +10000 ppm CO2

0632 1551 CO2 Probe with Bluetooth, includes Temperature and Humidity Sensor by Testo

Use the probe with the compatible testo multifunction measuring instrument (please order separately) to determine CO₂ concentration, air humidity and air temperature. Wet bulb temperature, dew point and absolute humidity are calculated at the same time.

CO₂ probe with Bluetooth including temperature and humidity sensor - features

Use the probe to check the indoor climate, for example in offices, production areas or storage facilities. To ensure accurate measurement results, air density compensation is carried out via the integrated absolute pressure measurement.

The readings of the CO₂ probe are transmitted to your measuring instrument via Bluetooth, up to a distance of 20 m.

Particularly useful: store individual readings directly in the measuring instrument by pressing the button on the probe. The clearly structured measurement menu for long-term measurement enables the measuring instrument to be operated intuitively. Reading trends are reliably recorded thanks to the convenient input of measurement time and measuring cycle. You can use these trends to evaluate changes in the indoor air quality.

Wireless and space-saving: more applications, less equipment

Endlessly versatile: a universal handle can be connected to all probe heads - so you can master more applications using less equipment and save space. The Bluetooth handle makes it more convenient to carry out your measurement and guarantees less cable clutter in the case.

Or order the cable handle to connect testo probe heads. This is an advantage if Bluetooth signals are not permitted. If the sensors (CO₂, humidity, temperature) need to be replaced in the distant future, you can change the probe head.

Intelligent calibration concept

You will get exceptionally accurate measurement results with the digital probe, because the measuring instrument makes measurement uncertainty a thing of the past. You only need to send the probe head in for calibration - so the measuring instrument remains in continuous use.

Areas of application for the CO₂ probe with Bluetooth

Use the CO₂ probe including temperature and humidity sensor to check the indoor climate (indoor air quality), e.g. in offices, production areas or storage facilities.

The CO₂ concentration is a primary indicator of indoor air quality. Poor air quality due to excessive CO₂ concentration results in tiredness and lack of concentration, and can even cause illnesses. The CO₂ concentration should therefore not normally exceed 1,000 ppm.

• Intuitive: clearly structured measurement menu for long-term measurement and parallel determination of CO₂ concentration, humidity and air temperature in indoor areas
• Precise: calculation of wet bulb temperature, dew point and absolute humidity
• Convenient: Bluetooth connection between measuring instrument and probe, a universal handle can easily be combined with other probe heads
• Intelligent calibration concept

Includes:

CO₂ probe with Bluetooth including temperature and humidity sensor (consisting of CO₂ probe head and Bluetooth handle); 4 x AA batteries, table stand and calibration protocol.

0632 1552 CO2 Probe includes Temperature and Humidity Sensor, Fixed Cable by Testo

Use the probe with the compatible testo multifunction measuring instrument (please order separately) to determine CO₂ concentration, air humidity and air temperature. Wet bulb temperature, dew point and absolute humidity are calculated at the same time.

CO₂ probe including temperature and humidity sensor - features

Use the probe to check the indoor climate, for example in offices, production areas or storage facilities. To ensure accurate measurement results, air density compensation is carried out via the integrated absolute pressure measurement.

Use the fixed cable on the handle to connect the CO₂ probe to the measuring instrument (please order separately).

Particularly useful: store individual readings directly in the measuring instrument by pressing the button on the probe. The clearly structured measurement menu for long-term measurement enables the measuring instrument to be operated intuitively. Reading trends are reliably recorded thanks to the convenient input of measurement time and measuring cycle. You can use these trends to evaluate changes in the indoor air quality.

Space-saving: more applications, less equipment

Endlessly versatile: a universal handle can be connected to all probe heads - so you can master more applications using less equipment and save space.

Order the Bluetooth® handle to make it more convenient to carry out your measurement and guarantee less cable clutter in the case. This transmits the readings to the measuring instrument from a distance of up to 20 metres. If the sensors (CO₂, humidity, temperature) need to be replaced in the distant future, you can change the probe head.

Intelligent calibration concept

You will get exceptionally accurate measurement results with the digital probe, because the measuring instrument makes measurement uncertainty a thing of the past. You only need to send the probe head in for calibration - so the measuring instrument remains in continuous use.

Areas of application for the CO₂ probe

Use the CO₂ probe including temperature and humidity sensor to check the indoor climate (indoor air quality), e.g. in offices, production areas or storage facilities.

The CO₂ concentration is a primary indicator of indoor air quality. Poor air quality due to excessive CO₂ concentration results in tiredness and lack of concentration, and can even cause illnesses. The CO₂ concentration should therefore not normally exceed 1,000 ppm.

• Intuitive: clearly structured measurement menu for long-term measurement and parallel determination of CO₂ concentration, humidity and air temperature in indoor areas
• Precise: calculation of wet bulb temperature, dew point and absolute humidity
• Convenient: a universal handle can easily be connected to other probe heads
• Intelligent calibration concept

Includes:

CO₂ probe including temperature and humidity sensor (consisting of CO₂ probe head and cable handle (cable length 1.4 m); 4 x AA batteries, table stand and calibration protocol.

Measuring Range: -20 to +70 °C
Measuring Range: 0 to +20 m/s