$400 - $500, Test and Measurement

0635 2143 Pitot Tube; 500mm; TC Type K (need hose 0554 0440) by Testo

To measure flow velocities in ventilation ducts or process air, you can upgrade your measuring instrument by adding a Pitot tube. Pitot tubes provide the optimum conditions, especially for higher flow velocities and dust-laden air.

This Pitot tube is 500 mm long and features integrated temperature measurement.

• For measuring flow velocities, e.g. in ventilation ducts or process air
• Length: 500 mm
• Measuring range: 1 to 30 m/s
• Operating temperature: 0 to +600 °C

0635 9430 100 mm Vane Probe Head by Testo

Combine the probe head with the adapter for air velocity probes and simply plug it onto the handle with cable or Bluetooth. For convenient measurements at ceiling outlets, we recommend the extendable telescope for air velocity probes including 90° angle.

Note: Please note that you need the handle adapter (order number 0554 2160) to use this probe head in conjunction with the handles.

• Intuitive: parallel determination of air velocity, volume flow and air temperature
• Precise: detects the smallest air velocities from as little as +0.1 m/s and is therefore ideal for laminar flow measurements in cleanrooms
• Convenient: probe head is easy to attach to the universal Bluetooth or cable handle or to the extendable telescope (all available to order separately) using the adapter
• Precise: get the right results in next to no time, even in turbulent air flow - using the optionally available funnel set and volume flow straightener
• Intelligent calibration concept: only send in the probe head for calibration

Includes:

100 mm vane probe head, bracket for testovent measurement funnel and calibration protocol.

Measuring Range: 0 to +50 °C
Measuring Range: +0.3 to +20 m/s

0635 9532 Vane Probe (Ø 16 mm) Fixed Cable by Testo

Use the vane probe with the compatible testo multifunction measuring instrument (please order separately) to determine air velocity and volume flow.

Vane probe - features

Use the fixed cable to connect the vane probe to the measuring instrument. The probe is equipped with a telescope, which can be extended to a maximum length of 0.85 m. The immersion depth is easy to read off thanks to the scaling on the telescope.

The clearly structured measurement menu for volume flow makes the measuring instrument intuitive to operate. The volume flow is precisely calculated thanks to convenient input of the size and geometry of the duct cross-section. Timed and multi-point mean calculation, average volume flow, current reading and min./max. values are displayed in the measuring instrument.

Intelligent calibration concept

You will get exceptionally accurate measurement results with the digital probe, because the measuring instrument makes measurement uncertainty a thing of the past. You only need to send the probe in for calibration - so the measuring instrument remains in continuous use.

Areas of application for the hot wire probe

Ventilation ducts: Use the vane probe to measure air velocity in ventilation ducts with reliability. Benefit from fast calculation of the volume flow: in the "volume flow" measurement menu of the compatible measuring instrument (please order separately), configure the dimensions and geometry of the duct cross-section - the measuring instrument shows you the volume flow straight away.

• Intuitive: parallel determination of air velocity, volume flow and humidity
• Precise: accurate measurement results from +0.6 to +50 m/s
• Convenient: integrated telescope that can be extended to 0.85 m, with scaling, makes it easy to measure in any cross-section
• Intelligent calibration concept

Includes:

Vane probe (Ø 16 mm) with fixed cable (cable length 1.7 m), including telescope (can be extended to 0.85 m) and calibration protocol.

Measuring Range: 0 to +40 °C; +2 to +14 pH

Measuring Range: -10 to +80 °C; 0 to +14 pH

3107 Benchtop Meter with RS-232 Interface by Jenco

The Jenco Model 3107 bench type Conductivity, Salinity, Temperature System is a rugged, microprocessor based instrument designed for use in field laboratories and process control applications, using a four electrode cell, it is an essential tool for precise measurements of conductivity, salinity and temperature.

3173K0.1 Large LCD Conductivity/TDS/Temperature Benchtop Meter Kit by Jenco

Conductivity/TDS/Temperature benchtop meter, with an extra large LCD display, adjustable cell constants K=0.1, 1.0, 10.0, programmable temperature co-efficient and reference temperature. Battery or 115/230 AC powered. CE approved.

Includes:

• 3173: Benchtop Conductivity meter
• 109: Conductivity Probe, K=0.1
• Choice of 6230D115: 120V AC adapter or 6230D230: 220V AC adapter

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Displays conductivity and temperature, or tds and temperature readings at the same time.
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 3 conductivity ranges are available for improved usability.
• Convenient one point calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual
• compensation when temperature probe is not present.
• Automatic lock mode is available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• AC adaptor or battery power.

3173RK0.1 Large LCD Conductivity/TDS/Temperature Benchtop Meter Kit by Jenco

Conductivity/TDS/Temperature benchtop meter, with an extra large LCD display, adjustable cell constants K=0.1, 1.0, 10.0, programmable temperature co-efficient and reference temperature. Available with RS-232C computer interface. Battery or 115/230 AC powered. CE approved.

Includes:

• 3173R Large LCD Conductivity/TDS/Temperature Benchtop Meter
• 109: Conductivity Probe, K=0.1
• Choice of 6230D115: 120V AC adapter or 6230D230: 220V AC adapter

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Displays conductivity and temperature, or tds and temperature readings at the same time.
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 3 conductivity ranges are available for improved usability.
• Convenient one point calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual
• compensation when temperature probe is not present.
• Automatic lock mode is available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• RS-232 computer interface.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• AC adaptor or battery power.

3173RK1 Large LCD Conductivity/TDS/Temperature Benchtop Meter Kit by Jenco

Conductivity/TDS/Temperature benchtop meter, with an extra large LCD display, adjustable cell constants K=0.1, 1.0, 10.0, programmable temperature co-efficient and reference temperature. Available with RS-232C computer interface. Battery or 115/230 AC powered. CE approved.

Includes:

• 3173R Large LCD Conductivity/TDS/Temperature Benchtop Meter
• Choice of 101: Epoxy, Conductovity probe, K=1.0, 3-ft or 106: Glass, Conductivity probe, K=1.0, 3-ft
• Choice of 6230D115: 120V AC adapter or 6230D230: 220V AC adapter

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Displays conductivity and temperature, or tds and temperature readings at the same time.
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 3 conductivity ranges are available for improved usability.
• Convenient one point calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual
• compensation when temperature probe is not present.
• Automatic lock mode is available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• RS-232 computer interface.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• AC adaptor or battery power.

3173RK10 Large LCD Conductivity/TDS/Temperature Benchtop Meter Kit by Jenco

Conductivity/TDS/Temperature benchtop meter, with an extra large LCD display, adjustable cell constants K=0.1, 1.0, 10.0, programmable temperature co-efficient and reference temperature. Available with RS-232C computer interface. Battery or 115/230 AC powered. CE approved.

Includes:

• 3173R Large LCD Conductivity/TDS/Temperature Benchtop Meter
• 107: Conductivity Probe, K=10.00
• Choice of 6230D115: 120V AC adapter or 6230D230: 220V AC adapter

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Displays conductivity and temperature, or tds and temperature readings at the same time.
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 3 conductivity ranges are available for improved usability.
• Convenient one point calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual
• compensation when temperature probe is not present.
• Automatic lock mode is available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• RS-232 computer interface.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• AC adaptor or battery power.

3173RK Large LCD Conductivity/TDS/Temperature Benchtop Meter Kit by Jenco

Conductivity/TDS/Temperature benchtop meter, with an extra large LCD display, adjustable cell constants K=0.1, 1.0, 10.0, programmable temperature co-efficient and reference temperature. Available with RS-232C computer interface. Battery or 115/230 AC powered. CE approved.

Includes:

• 3173R Large LCD Conductivity/TDS/Temperature Benchtop Meter
• K=1 Cond. Probe
• 6230D115 AC Adapter
• 007N Electrode Arm Holder

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Displays conductivity and temperature, or tds and temperature readings at the same time.
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 3 conductivity ranges are available for improved usability.
• Convenient one point calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual
• compensation when temperature probe is not present.
• Automatic lock mode is available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• RS-232 computer interface.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• AC adaptor or battery power.

3175K0.1 Microcomputer Based Conductivity/TDS/Temperature Benchtop Meter Kit by Jenco

Jenco EC3175 is a new conductivity meter with temperature readout, backlit LCD display, selectable cell constant and a streamlined look.

This benchtop meter is RoHS compliant.

Includes:

• 3175: Benchtop Conductivity meter
• 109: Conductivity Probe, K=0.1
• Choice of 6230D115: 120V AC adapter or 6230D230: 220V AC adapter

• Clear, large LCD display with backlight
• Displays conductivity and temperature at same time
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy
• Convenient one point calibration
• Calibration data is stored in memory and is ready for use on power up
• Automatically selects one of three conductivity ranges to display readings
• Readings are automatically compensated for temperature (ATC)
• Meter automatically switches into manual compensation when temperature probe is not present
• Automatic lock mode is available to lock in stable readings
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included
• Smaller case does not clutter valuable desk space
• 8pin DIN connector for conductivity cell & 10k thermistor
• AC adaptor or battery power

3175KA Microcomputer Based Conductivity/TDS/Temperature Benchtop Meter Kit by Jenco

Jenco EC3175 is a new conductivity meter with temperature readout, backlit LCD display, selectable cell constant and a streamlined look.

This benchtop meter is RoHS compliant.

Includes:

• 3175: Benchtop Conductivity meter
• Choice of 101: Epoxy, Conductovity probe, K=1.0, 3-ft or 106: Glass, Conductivity probe, K=1.0, 3-ft
• Choice of 6230D115: 120V AC adapter or 6230D230: 220V AC adapter
• 007N: Electrode Holder, Swing Arm

• Clear, large LCD display with backlight
• Displays conductivity and temperature at same time
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy
• Convenient one point calibration
• Calibration data is stored in memory and is ready for use on power up
• Automatically selects one of three conductivity ranges to display readings
• Readings are automatically compensated for temperature (ATC)
• Meter automatically switches into manual compensation when temperature probe is not present
• Automatic lock mode is available to lock in stable readings
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included
• Smaller case does not clutter valuable desk space
• 8pin DIN connector for conductivity cell & 10k thermistor
• AC adaptor or battery power

3177K0.1 Benchtop Conductivity Meter Kit by Jenco

Kit Includes:

• 3177 - Benchtop, Conductivity/Temperature/TDS Meter
• 109 - Glass/Platinum, W/ 8-Pin Connector, K=0.1
• 6230D115 - AC Adapter, 9 VDC, Center Negative

The Basis Series Conductivity/TDS/Salinity benchtop is the latest entry-level meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Low cost of ownership

Well-designed, Inside and Out

The Basis Series Conductivity/TDS/Salinity meter, along with the pH/mV model, forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Benchtop Conductivity/TDS/Salinity Meter Renowned for Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with ±0.5% full scale accurate across entire measurement range
• Uses 2-wire conductivity cells with adjustable k=0.01, k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy
• Each and every unit is hand calibrated and QC'ed by at least 2 teams
• Simple one point calibration

Upgraded User Experience and Usability

While the Basis Series provides the quality readings you expect, it does so in a design that optimizes its user-friendliness and minimizes its footprint on your workstation.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Convenient one point calibration
• Automatically determines the best conductivity ranges to display readings
• Well-situated keys with tactile feedback
• Splash-resistant case made with durable, reinforced plastic for added protection
• AC adaptor or battery powered

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series Conductivity/TDS/Salinity meter uses a common Jenco 8-pin DIN connector so it works with our other conductivity electrodes. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• Splash-resistant case is made with durable, reinforced plastic for added protection
• 8-pin DIN connector for conductivity cell & 10k thermistor
• Optional, detached electrode arm

3177K10 Benchtop Conductivity Meter Kit by Jenco

Kit Includes:

• 3177 - Benchtop, Conductivity/Temperature/TDS Meter
• 107 - Glass/Platinum, W/ 8-Pin Connector, K=10
• 6230D115 - AC Adapter, 9 VDC, Center Negative

The Basis Series Conductivity/TDS/Salinity benchtop is the latest entry-level meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Low cost of ownership

Well-designed, Inside and Out

The Basis Series Conductivity/TDS/Salinity meter, along with the pH/mV model, forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Benchtop Conductivity/TDS/Salinity Meter Renowned for Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with ±0.5% full scale accurate across entire measurement range
• Uses 2-wire conductivity cells with adjustable k=0.01, k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy
• Each and every unit is hand calibrated and QC'ed by at least 2 teams
• Simple one point calibration

Upgraded User Experience and Usability

While the Basis Series provides the quality readings you expect, it does so in a design that optimizes its user-friendliness and minimizes its footprint on your workstation.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Convenient one point calibration
• Automatically determines the best conductivity ranges to display readings
• Well-situated keys with tactile feedback
• Splash-resistant case made with durable, reinforced plastic for added protection
• AC adaptor or battery powered

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series Conductivity/TDS/Salinity meter uses a common Jenco 8-pin DIN connector so it works with our other conductivity electrodes. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• Splash-resistant case is made with durable, reinforced plastic for added protection
• 8-pin DIN connector for conductivity cell & 10k thermistor
• Optional, detached electrode arm

3177KA Benchtop Conductivity Meter Kit by Jenco

Kit Includes:

• 3177 - Benchtop, Conductivity/Temperature/TDS Meter
• 101 - Epoxy/Carbon, 8-Pin Connector, K=1.0
• 6230D115 - AC Adapter, 9 VDC, Center Negative
• 007N - Plastic Holder, Spring Balanced Swing Arm

The Basis Series Conductivity/TDS/Salinity benchtop is the latest entry-level meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Low cost of ownership

Well-designed, Inside and Out

The Basis Series Conductivity/TDS/Salinity meter, along with the pH/mV model, forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Benchtop Conductivity/TDS/Salinity Meter Renowned for Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with ±0.5% full scale accurate across entire measurement range
• Uses 2-wire conductivity cells with adjustable k=0.01, k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy
• Each and every unit is hand calibrated and QC'ed by at least 2 teams
• Simple one point calibration

Upgraded User Experience and Usability

While the Basis Series provides the quality readings you expect, it does so in a design that optimizes its user-friendliness and minimizes its footprint on your workstation.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Convenient one point calibration
• Automatically determines the best conductivity ranges to display readings
• Well-situated keys with tactile feedback
• Splash-resistant case made with durable, reinforced plastic for added protection
• AC adaptor or battery powered

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series Conductivity/TDS/Salinity meter uses a common Jenco 8-pin DIN connector so it works with our other conductivity electrodes. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• Splash-resistant case is made with durable, reinforced plastic for added protection
• 8-pin DIN connector for conductivity cell & 10k thermistor
• Optional, detached electrode arm

3177MK Benchtop Conductivity Meter Kit by Jenco

The Basis Series Conductivity/TDS/Salinity benchtop is the latest entry-level meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Low cost of ownership

The Basis Series Conductivity/TDS/Salinity meter, along with the pH/mV model, forms the foundation of Jenco s benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Benchtop Conductivity/TDS/Salinity Meter Renowned for Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with ±0.5% full scale accurate across entire measurement range
• Uses 2-wire conductivity cells with adjustable k=0.1 or 4-wire conductivity cells k=0.475 cell constants for improved flexibility and accuracy
• Each and every unit is hand calibrated and QC'ed by at least 2 teams
• Simple one point calibration

Upgraded User Experience and Usability

While the Basis Series provides the quality readings you expect, it does so in a design that optimizes its user-friendliness and minimizes its footprint on your workstation.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Convenient one point calibration
• Automatically determines the best conductivity ranges to display readings
• Well-situated keys with tactile feedback
• Splash-resistant case made with durable, reinforced plastic for added protection
• AC adaptor or battery powered

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series Conductivity/TDS/Salinity meter uses a common Jenco 8-pin DIN connector so it works with our other conductivity electrodes. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• Splash-resistant case is made with durable, reinforced plastic for added protection
• 8-pin DIN connector for conductivity cell & 10k thermistor
• Optional, detached electrode arm

Kit Includes:

• 3177M - Benchtop, Conductivity/Temperature/TDS Meter with Memory
• 109L - Glass/Platinum, Conductivity Sensor, K=0.1, 8-Pin Connector
• 110/240VAC - 110 ~ 240V Power Adapter

3177MKB Benchtop Conductivity Meter Kit by Jenco

The Basis Series Conductivity/TDS/Salinity benchtop is the latest entry-level meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

• Renowned accuracy and repeatability
• Upgraded user experience and usability
• Low cost of ownership

The Basis Series Conductivity/TDS/Salinity meter, along with the pH/mV model, forms the foundation of Jenco s benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Benchtop Conductivity/TDS/Salinity Meter Renowned for Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

• Repeatable readings with ±0.5% full scale accurate across entire measurement range
• Uses 2-wire conductivity cells with adjustable k=0.1 or 4-wire conductivity cells k=0.475 cell constants for improved flexibility and accuracy
• Each and every unit is hand calibrated and QC'ed by at least 2 teams
• Simple one point calibration

Upgraded User Experience and Usability

While the Basis Series provides the quality readings you expect, it does so in a design that optimizes its user-friendliness and minimizes its footprint on your workstation.

• Streamlined, modern and smaller design creates clutter-free workspace
• Large, high contrast LCD
• Convenient one point calibration
• Automatically determines the best conductivity ranges to display readings
• Well-situated keys with tactile feedback
• Splash-resistant case made with durable, reinforced plastic for added protection
• AC adaptor or battery powered

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series Conductivity/TDS/Salinity meter uses a common Jenco 8-pin DIN connector so it works with our other conductivity electrodes. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

• Splash-resistant case is made with durable, reinforced plastic for added protection
• 8-pin DIN connector for conductivity cell & 10k thermistor
• Optional, detached electrode arm

Kit Includes:

• 3177M - Benchtop, Conductivity/Temperature/TDS Meter with Memory
• 101C - Epoxy/Carbon, 8-Pin Connector, K=0.475
• 110/240VAC - 110 ~ 240V Power Adapter

3250M Handheld Conductivity Meter with RS-232 & Memory by Jenco

• Clear LCD displays conductivity, salinity or TDS, simultaneously with temperature.
• Convenient one point calibration. Calibration data is stored in memory and is ready for use on power up.
• Accepts 2-wire and 4-wire conductivity cells with k=0.1, k=1.0 and K=10.0 cell constants for improved flexibility and accuracy.
• Inclined back provides ideal viewing angle for benchtop use.
• 50 memory storage of conductivity, salinity, TDS with temperature reading with memory location ID.
• RS-232 computer interface with software.
• IP65 waterproof.
• AC adaptor or battery power (low battery indicator).

3251MK Handheld Conductivity Meter with Memory Kit by Jenco

Includes:

• 3251M Handheld Conductivity Meter with Memory
• K=1 Cond. Probe
• 6230D115 AC Adapter
• 3250F Carrying Case