$400 - $500, Test and Measurement

Monitor 4USB Handheld Radiation Alert Detector with Mini-USB Option by SE International

The M4 and M4EC are compact, ergonomic, general purpose survey meters capable of detecting alpha, beta, gamma, and x-rays over 3 selectable ranges. A red count light flashes and a beep sounds with each event detected. The Monitor 4EC offers a more linear reading for gamma and x-rays (above 40 keV). Click here for Monitor 4 without USB option.

6308PT 1/4 DIN Panel Mount pH Single Parameter Analyzer by Jenco

1/4 DIN panel mount pH single parameter analyzer with electrode efficiency display function. Features pH linear or antilog transmitter output, hysteresis control and uninterrupted operation during pH calibration. Has one 4-20mA output, 5 relays and a RS-485 communications interface. Graphical display. 115/230V AC. CE Approved.

• Bright, graphical LCD display, 1.5 x 2.25
• Simultaneous measurement and analysis
• 1/4 DIN watertight, ip65 rated enclosure
• Reversible & isolated 4 to 20ma output with adjustable bandwidth
• Continuous controller / relays operation during calibration
• 4-digit password security protection
• Programmable set point hysteresis
• Automatic temperature compensation
• CE approved
• Built in ISO9001 certified facility
• Membrane keypad with audio feedback
• Power down, non-volatile memory backup
• RS-485 output
• Multiple spst on/off relays
• Embedded self diagnostic program
• High 50/60 hz noise rejection

6011BKA Bluetooth Handheld pH/ORP Meter Kit With Batteries Only by Jenco

Well-designed, Inside and Out

The Basis Portable Series is Jenco's latest iteration of our portable meters and represents a huge step forward for on-location water quality measurements. This series introduces Bluetooth or non-Bluetooth connectivity and a merging of the best features from our other series, which means we double down on reliability, usability and value.

Accurate, Reliable Measurements

• Up to 5Point calibration (pH)
• mV zero adjust (ORP)
• > 1012 Ω input impedance (pH)
• Each and every unit is hand calibrated and QC ed by at least 2 teams.
• CE, RoHS, FCC ID complaint

Improved Usabiltiy

• Clear, large LCD
• Membrane buttons with tactile feedback On-devicememory storage
• 750 point memory with date/time stamp for GLP
• IP67 water-tight housing
• Removable, rugged protective case
• Inclined back for tabletop use

App-Enhanced Productivity

Transfer 750 saved measurement data from meter to app for sharing and further analysis.

Other Meters In This Series

• Single and dual parameter pH, ORP, conductivity, TDS, salinity,dissolved oxygen, optical dissolved oxygen, pH/ORP/EC, pH/ODO.
• Polarographic or optical DO
• Bluetooth and non-Bluetooth models
• With memory storage
• With or without protective case

Kit Includes:

• 6011B - Bluetooth Handheld pH/ORP Meter With Batteries Only
• 600P - pH Electrode, 3-ft Cable, BNC Connector, Max Temp. 60 Deg. C
• 6011AST - Stainless Steel Temperature Sensor, 10K ATC, 1m, 6 PIN
• 6011F - Carrying Case

6350N pH/Conductivity/Salinity/mV/Temp. Handheld Meter with RS-232 by Jenco

The Jenco 6350 is a high performance pH/Conductivity/Salinity/mV/Temp. handheld meter in a splash proof case with an RS-232C interface that allows it to communicate with any IBM compatible PC. This meter is CE approved and features 0.01 pH Resolution and a mV range of ± Salinity is in the range of 0.0 to 80.0 ppt with a 0.0 ppt resolution. Conductivity Cells are selectable for K=1.0 or K=5.0 and ranges are selectable for uS or mS.

• pH buffer recognition: model 6350 (pH:7.00,4.01,10.01) , model 6350c (pH:6.86,4,9.18)
• Selectable 2/4 wire cells for long cable length & wide measurement range
• Store 50 sets of data in non-volatile memory
• Conductivity auto/manual range
• Power down memory backup
• Splash resistant/watertight case
• Audio feedback keys
• Battery/ac adaptor
• RS-232c output

Monitor 4EC Handheld Radiation Alert Detector by SE International

The M4 and M4EC are compact, ergonomic, general purpose survey meters capable of detecting alpha, beta, gamma, and x-rays over 3 selectable ranges. A red count light flashes and a beep sounds with each event detected. The Monitor 4EC offers a more linear reading for gamma and x-rays (above 40 keV).Click here for Original Monitor 4. Click here for USB Model.

Both Detect beta at 50 keV with typical 35% detection efficiency and beta at 150 keV with typical 75% detection efficiency.

Monitor 4:

Monitor 4EC:

Monitor 4 Handheld Radiation Alert Detector by SE International

The M4 and M4EC are compact, ergonomic, general purpose survey meters capable of detecting alpha, beta, gamma, and x-rays over 3 selectable ranges. A red count light flashes and a beep sounds with each event detected. The Monitor 4EC offers a more linear reading for gamma and x-rays (above 40 keV).Click here for Original Monitor 4. Click here for USB Model.

Both Detect beta at 50 keV with typical 35% detection efficiency and beta at 150 keV with typical 75% detection efficiency.

Monitor 4:

Monitor 4EC:

WD-20250-40 Temperature/RH Touch Screen Recorder with NIST-Traceable Calibration by Digi-Sense

Accurately measure and log temperature, relative humidity, and dew point conditions with this tabletbased instrument. An intuitive touch-screen display makes this recorder easy to use and view. Measured values are simultaneously displayed both graphically and digitally on a high-resolution, color display. Simply touch to program sample frequency, sample size, alarm settings, start mode, and units of measure. Use this invaluable tool in real-time mode or set it to start logging at a future time.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Operation is simple right out of the box
• Resident operating software self-boots by pushing the on/off buttons no installation necessary
• Quickly download data in .csv format to your computer via included USB cable
• Sensor plugs directly into the back of the tablet for local use, or position sensor remotely using the included 6-ft extension cable
• Link additional extension cables, sold separately, to extend the sensor up to 18 feet from the instrument
• Convenient wall-mount or desktop operation

Applications

• Food, pharmaceutical, and chemical processing and storage
• Controlled environments
• Refrigerators and freezers
• Laboratories
• Warehouses and storage facilities
• Museums
• Libraries
• Cleanrooms
• Greenhouses

Includes

Tablet with built-in stand, temperature/RH sensor, 6-ft (1.8-m) sensor extension cable, USB cable, wall-mounting bracket, power supply, and NIST-traceable calibration with data supplied by InnoCal.

WD-91428-04 Temp300 Dual-Input Data Logging Thermocouple Thermometer by Digi-Sense

The Digi-Sense® Temp-300 thermometer features real-time data logging and a USB data output. Meter accepts dual inputs from type J, K, T, E, R, S, N, or B thermocouples probes with ANSI miniconnector. This robust and reliable meter works in any environment from the lab to the production floor. Sturdy armored construction protects against knocks and jars. Sealed keypad and ABS plastic case meet IP54 standards for splash resistance. Ergonomically designed housing is ideal for both large and small hands alike.

Large, illuminated display features easy-to-read digits. The seven-button control panel and intuitive on-screen menus guide you in choosing your desired functionality. Additional meter features include Min/Max, Hold, and average functions; temperature units in °F, °C, °R, or K; offset; time stamp/clock; countdown timer; out-of-range alarm with audible/visible indicator; auto shutoff; and low-battery indicator. Order an optional AC adapter to conserve battery life during extended operations.

Manually or automatically log up to 2000 sets of readings in real time with date and time stamp. Logging interval is selectable from 1 second to 60 minutes. Take differential temperature measurements with the T1/T2 function. The dot matrix display simultaneously indicates the readings of each probe, as well as the differential reading. For improved readability during rapidly changing temperatures, the meter resolution is keypad selectable. Above 999.9°, the meter automatically switches from 0.1° resolution to 1° resolution, below 99°C the meter autoranges to 1°C resolution.

The Temp-300 thermometer is individually factory calibrated. Automatic field calibration is easily performed for either a single- or dual-point calibration for each probe. Simply place the probe in a container packed with ice, fill with water, activate the calibration function and the meter automatically recognizes the freezing point.

Digi-Sense s exclusive "3-WAY HANDS-FREE" capability allows "hands-free" operation use the built-in stand on a table top, attach the meter to metal objects through magnets inserted into the armor boot, or hang from a pipe or belt using the hook-and-loop strap. Meter comes standard with the integral stand; the "hands-free" option adds magnets and strap (order separately).

Includes

Protective rubber armor/boot with stand and three AA batteries.

Key Features

• 3-way hands-free operation available
• Transfer data via USB
• Menu-driven set up to easily customize your meter
• Rugged armor with built-in stand withstand the toughest conditions
• Easy-to-use automatic field calibration ensures accurate readings
• Probes are sold separately

0564 5501 01 550s Basic Kit - Smart Digital Manifold with Wired Clamp Temperature Probes by Testo

The testo 550s digital manifold with 2-way valve block enables you to carry out your measurements on refrigeration, air conditioning systems, and heat pumps fast. The large display helps evaluate the results in graphic forms. Stored programs guide you through measurements and enable the automatic determination of numerous important system parameters such as superheating/subcooling, target superheat, cooling/heating capacity and many other areas.

Bluetooth probes for temperature, vacuum, and humidity can be easily connected and offer maximum flexibility in their application. In conjunction with the testo Smart App, you can take care of digital documentation directly on site.

Its proven quality and great durability guarantee the continuously high performance of your manifold in all conditions.

Includes:

• testo 550s digital 2-way manifold including batteries (4 x AA) and calibration protocol
• Clamp temperature probe kit (includes 2 x clamp probes NTC)
• Transport case
• testo Smart App (free download)
• Instruction manuals

• Large graphic display shows all results at a glance
• Simple wireless humidity, temperature, and vacuum measurements via Bluetooth connectivity
• Fast and easy pressure value display in analog look
• Rugged housing with IP 54 for maximum reliability in daily use
• Refrigerant listing updates automatically using the App
• Integrated calculation of the target superheat
• Easy to Use

190-607 Electrode Care Kit - Gold Electrode by Modern Water

Includes

• electrode polishing kit
• electrode conditioning solution B 25ml
• polishing paper 2000grit 5pk
• electrodes wipes pk10

400520 0407 NIST Calibration Certification Kit for testo 400 Airflow Kit (0563 0407) by Testo

Kits includes:

• NIST Air velocity certificate at 3 standard points (2)
• NIST pressure certificate

MC1K Handheld Radiation Alert Detector by SE International

The new ergonomic MC1K is a handheld survey meter using a built-in energy compensated GM detector. It detects gamma and x-rays up to 1000 mR/hr over 4 selectable ranges. A beep sounds and a count light flashes with each event detected.

VPESG2 Burst Tone Ultrasonic Sound Generator by Superior AccuTrak

The AccuTrak Sound Generator and the AccuTrak Detector form a non-invasive leak detection system capable of finding leaks in enclosures, such as buildings, vessels, automobiles, walk/reach in freezers, or any other container that needs to be leak-free.

The AccuTrak Sound Generator is used to "pressurize" rooms and enclosures with it's sound. This sound is above the human hearing range, and cannot be heard. It can penetrate through minute cracks, even ones that are not directly behind the leak point, and exit through it. It can thus trace the path air, or water, will take to cause a leak. The AccuTrak Detector receives the ultrasonic sound that escapes from the leak point, processes it and displays it's strength. The bigger the leak is, the higher the volume in the headset.

Applications:

• Buildings
• Roofing
• Automobiles
• Airplane cabins
• Walk/reach in freezers
• Any vessel that needs to be leak free!

Features:

• Burst Mode: If the background noise is extremely loud in a particular area, using Burst Tone will make the output of the sound generator much easier to identify.

EP DS Conductivity/Resistivity Meter: 0-0.5, 5, 50, 500, 5000 AμM/AμS; 2-30 MI by Myron L

READINGS YOU CAN COUNT ON

No water supply is completely pure. Every industrial, commercial, or natural source contains dissolved solids or salts. These impurities contribute to scale, corrosion, poor taste, and environmental pollution that endanger animal and plant life.

Myron L Company has two proven ways to measure such impurities. Our DS Meters provide fast, accurate, on-the-spot measurement of total dissolved solids (TDS) or conductivity. pDS Meters test conductivity or TDS, plus pH. Readings from their highly stable circuitry help prevent equipment damage, assure product quality, and verify in-line instrumentation in a wide range of applications.

RELIABILITY BUILT IN

Breakage is one of the major causes of sensor failure in a typical pH or conductivity instrument. Myron L instruments provide maximum protection for both the pH and conductivity electrodes inside the cell cup. The userreplaceable pH electrode features a chemical resistant, liquid junction.

UNIQUE FIELD-TESTED DESIGN

Our unique, durable, field-tested design has evolved over more than 40 years, making Myron L instruments among the most reliable and popular of their kind in the world.

They're lightweight and compact, Yet Myron L's DS and pDS Meters are also tough, with rugged, taut-band meter movements.

Put our meters to the test. Even after years of rough field service, they'll surpass your expectations of accurate, reliable readings.

APPLICATIONS

• Boilers
• Cooling towers
• Deionization
• Reverse osmosis
• Chemical concentrations
• Printing fountain solutions
• Swimming pools
• Water pollution control
• Wastewater

0554 4203 Air Flow Capture Hood, 36" x 36" for Testo 420 by Testo

Optional 36" x 36" capture hood for use with the testo 420 air flow capture hood, for measurements at air inlets and outlets. Includes an integrated flow straightener for high-precision measurement results, with 35" x 35" inner dimensions.

Monitor 4ECUSB Handheld Radiation Alert Detector with Mini-USB Option by SE International

The M4 and M4EC are compact, ergonomic, general purpose survey meters capable of detecting alpha, beta, gamma, and x-rays over 3 selectable ranges. A red count light flashes and a beep sounds with each event detected. The Monitor 4EC offers a more linear reading for gamma and x-rays (above 40 keV). Click here for Monitor 4 without USB option.

Measuring Range: -20 to +70°C
Measuring Range: 0 to +100 %RH

9070 Smart Vibration Meter by Test Products International

Vibration analysis at the touch of a button. Analyze and Interprets readings; incredible performance at an unbelievably low price. Overall machine and bearing conditions: vibration values are displayed with color coded alarm levels for ISO values and Bearing Damage (BDU).

Benefits:

• ISO Built-in Alarms
• Easily identify bearing problems with BDU Reading
• Easily identify problems with built in band filters: 1X (unbalance), 2X (misalignment), 3X (looseness)
• 800 line FFT (spectrum)
• Ruggedized IP67 case
• 3-year Limited Warranty

Features:

• Full Color OLED Display
• Built-in accelerometer with stinger. Optional long stinger and magnetic mount available

Applications:

• Commercial / Industrial HVAC
• Food Processing
• Manufacturers
• Mining
• Packaging
• Petrochemical
• Pulp and Paper
• Power Plants
• Utilities
• Automotive

0563 0003 Smart Probes VAC Set Wireless Smart Probe Kit by Testo

The testo VAC Smart Probe Set provides a combination of four instruments needed to test and balance a multioutlet ventilation system. Two types of anememoters give you the capacity to measure in-duct air flow and the flow from each vent. Using an IR temperature probe for surface temperatures will show you motor and electrical equipment conditions and an easy check of each outlet. The thermohygrometer will provide an assessment of the humidity and dewpoint concerns throughout the system. Users can remotely read the measurements from multiple probes by using the testo Smart Probes App. The kit comes with a handy case at a great value.

The testo Smart Probes App is a powerful and easy-touse tool. It allows you to remotely read measurements from up to six (6) Smart Probes and easily document/report the results. Automatic calculations make it a snap! All measurement data is displayed as instrument readings, tables, or graphs. The measurements can be quickly saved as PDF or Excel files. The App creates custom reports which can be saved and/or shared by email. All your data can be stored and retrieved saving you hours of time consuming paperwork!

• Measures air velocity, temperature, relative humidity, wet bulb / dewpoint, and calculate volume flow
• Kit includes instruments to measure, balance, troubleshoot, and optimize ventilation systems performance
• RH & air flow measurements in-duct and at registers viewed simultaneously in the testo Smart Probes App (605i, 405i, 410i)
• App calculates system enthalpy with air flow & RH probes
• Photograph objects with smart device, capturing measurement marker and temperature values for reference and reporting (805i)
• Measurement data is transmitted to the convenient and powerful testo Smart Probes App in your smart device
• Tough, accurate, and easy-to-use
• For all HVAC/R technicians and contractors