$150 - $200, Test and Measurement

SCT-108.002.36 SCT MORAL Tachometer (Non-Contact & Contact) by ScichemTech

Includes:

• Cone Adapter
• Funnel Adapter
• Contact Adapter
• Master Wheel Reflective Tape

Features:

• A complete portable SCT meter for rotational speed (rev) measurements.
• Non-contact and contact mode
• Highly reliable and accurate reading
• Non-contact and contact mode
• Laser sighting operating range up to 40 inches/100 cm (laser)
• Auto ranging/fixed decimal
• Tripod mounting bushing
• Contact adaptors
• Battery operated with low battery indication

SCT-108.002.48 SCT RICKY UV-AB Meter by ScichemTech

Includes:

• Sensor Probe
• User Manual
• Color Box
• Hard Carrying Case
• 9V Battery

Features:

• A complete portable SCT meter for intensity of ultra violet rays measurement (UV-A, C+AB)
• Backlight LCD and 4 digits dual display
• High and low measurements
• Range in a unit MW/cm2 or UW/cm2
• Socket of tripod mounting
• Automatic measuring
• Magnetic mount
• 20 points memory
• Battery operated with low battery indication.

SCT-108.002.73 SCT XARIA Infrared Thermometer (High Performance With Adj. Emissivity) by ScichemTech

Includes:

• 9V DC Battery
• Instruction Manual
• Carrying Case

Features:

• A complete portable SCT meter for non contact temperature measurements.
• Temperature range: -50°C to 999°C
• Adjustable emissivity from 0.1 to 1.0
• Ultra low power consumption in shutdown mode.
• Extended long time measuring reliability.
• Laser sighting on/off is switchable.
• High DS ratio/max-min v/avg./∆t
• Backlight LCD display.
• Option to select °C/°F
• Electronic trigger lock.
• Auto measuring
• 10 points memory
• Battery operated.

SCT-108.005.04 SCT-TDS-MINI TDS Mini Controller by ScichemTech

Includes:

• TDS probe
• Fixation clamps
• Instruction manual

Features:

• SCT TDS MINI online TDS controller is an panel Instrument for online monitoring of Industrial process conductivity
• Simple and compact design
• Three ranges of TDS measurements in on single controller
• Range switch over and constant check can be easily adjusted from the rear panel.
• Unique signal collecting and processing technology.
• Special think film circuit for accurate measurement and stable operations.
• Linearized data and automatic temperature compensations.
• In line measurement and control of TDS.
• TDS Electrode is supplied with 5 meter cable

SCT-108.007.02 SCT-TANK-2 SCT Dosing Tank (LDPE) - 200 Litre - 100 Litre by ScichemTech

SCT dosing tanks are with red screw fitting lid with a raised section to mount dosing pumps, mixers, level sensors etc. Made of high quality LDPE (low density polyethylene) cylindrical in shape

183A True RMS DMM with Temperature, Capacitance, Duty Cycle and Low-pass Filter by Test Products International

The 183A is a hand-held autoranging DMM. The 183A measures ACV, DCV, ACA, DCA, Resistance, Frequency, Duty Cycle, Diodes, Capacitance, Temperature and Continuity. The meter is also easy to use and built to last.

Features:

• REC: Records Min/Max and Average readings during specified measurement intervals.
• Range: Allows the user to manually range the 183A instead of autoranging.
• Hold: Holds the reading on the display for easy viewing.
• REL: Displays the value as a difference to a reference value.
• Auto Off: Preserves battery life.
• Rubber Boot: Added protection when the instrument is dropped.
• 0.5% DCV basic accuracy
• 0 to 750 ACV; max resolution 1mV
• 0 to 1,000 DCV; max resolution 0.1mV
• 0 to 32.6MΩ; max resolution 0.1Ω
• Audible continuity
• 0 to 10 amps AC/DC; max resolution 0.1uA
• Analog bar graph
• cULus 61010-1
• CAT II - 1000V, CAT III - 600V

Applications:

• Thermocouples in furnaces or gas applications
• Heat anticipator current in thermostats
• Line voltage
• Voltage of direct drive DC motors
• Control circuit voltage
• Motor run and start capacitors
• Flame safeguard control current
• Heating element resistance (continuity)
• Compressor winding resistance
• Contactor and relay coil resistance
• Continuity of wiring
• Continuity of circuit breakers
• Temperature with optional temperature adapter
• Bar graph to indicate rapid fluctuations in measurements

The 183A comes complete with the following accessories:

• 183A Instrument
• Zippered Vinyl Carrying Case
• Rubber Boot
• Test Lead Set
• Instruction Manual

296 Clamp-on Plus DMM with True RMS and Harmonics Capabilities by Test Products International

The 296 is a clamp-on plus DMM with True RMS and Harmonics capabilities. The 296 offers measurements in all basic electrical functions, plus.

Features:

• True RMS: Provides accurate and dependable readings of non-linear loads.
• HDR Mode: Determines if a signal is clean or distorted
• Bar Graph: When measuring frequency, bar graph indicates current level.
• TRIM Mode: Smooths out unstable readings.
• Peak Mode: For start-up and inrush currents.
• Sleep Mode: Preserves battery life.
• Data Hold: Holds the reading on the display for easy viewing.
• Measure AC/DC volts, resistance, continuity and frequency
• CAT III 600 V rated
• cULus 61010
• 3-year limited warranty

Applications:

• Heat anticipator current in thermostats
• Line voltage
• Control circuit voltage
• Heating element resistance
• Compressor winding resistance
• Contactor and relay coil resistance
• Motor and compressor start up current
• Continuity of wiring
• Frequency on control and line voltage
• Record/Min/Max voltage of controls and line voltages
• Bar graph to indicate rapid fluctuations

The 296 comes complete with the following accessories:

• Carrying Pouch
• Test Lead Set
• Instruction Manual
• Battery

TPI-3000A Universal Cables & Connector Kit by Test Products International

TPI-3000A Universal Cables & Connector Kit. Technicians and engineers turn to TPI for their connecting needs. With the TPI-3000A and TPI-5000A kits, technicians can create connections on the spot in seconds.

Features

• Includes 8 types of connectors for male and female adapters
• Simply screw on any combination of 24 connectors to any of the six universal interfaces with no soldering or crimping needed
• Reusable connectors can be used over and over in different combinations to fit and assist customizing the installation
• Works with universal cables GEX-60 (36"), GEX-48 (48"), and GEX-75 (72")
• Connector bodies are silver-plated machine brass with PTFE insulation
• Zippered soft case protects and organizes the individual pieces

365 K-Type Thermocouple Thermometer by Test Products International

TPI contact temperature testers are accurate, reliable, and built to last. Models 341K, 343 and 367D can be auto field calibrated to system accuracy (tester plus probe) of ± 1°F in less than 10 seconds in ice water.

Auto Field Calibration Perform ice bath calibration to achieve ±1°F system accuracy within the 30°F to 120°F temperature range. Calibration is an easy two-step process performed with instrument keypad, no additional tools needed.

Features:

• Large two line LCD display with clock display, alarm clock, alarm timer, and over temperature alarm
• Multi use belt clip (A366): can used as a belt clip or wall mount
• Auto Resolution (0.1° / 1°)
• °C/°F Selectable
• Auto Off
• Overmolded case
• Up to 14,000 hour battery life (AA alkaline batteries x 2)

367D Data Logging Thermometer (K & T-Type Thermocouple & Thermistor) by Test Products International

TPI contact temperature testers are accurate, reliable, and built to last. Models 341K, 343 and 367D can be auto field calibrated to system accuracy (tester plus probe) of ± 1°F in less than 10 seconds in ice water.

Auto Field Calibration Perform ice bath calibration to achieve ±1°F system accuracy within the 30°F to 120°F temperature range. Calibration is an easy two-step process performed with instrument keypad, no additional tools needed.

Features:

• Auto Field Calibration Perform ice bath calibration to achieve ±1°F system accuracy within the 30° F to 120°F temperature range. Calibration is easy two-step process performed with keypad, no additional tools needed
• Data logging capability: 16,000 readings with sampling interval from 1 second upto 24 hours.
• Auto Resolution (0.1° / 1°)
• Store 16 readings
• Real time and logged data transfer to PC via optional USB docking station (A367)
• Multi use belt clip (A366): can used as a belt clip or wall mount
• Large two line LCD display with clock display, alarm clock, alarm timer, and over temperature alarm
• Fast reading mode - Increases sample rate
• Min/Max Record and Data Hold
• Selectable Resolution (0.1° / 1°)
• °C/°F Selectable
• Up to 14,000 hour battery life (7,000hrs data logging) (AA alkaline batteries x 2)
• Auto Off
• Overmolded case

TPI-5010 Universal Adapter Cable Kit by Test Products International

For use with TPI-3000A and TPI-5000A adapter kits

• Provides the functionality of an entire set of cables
• Creates the cable of your choice using the universal cable and any combination of connectors from the kits noted above
• No soldering, no crimping - cable may be used over and over in different combinations
• Soft insulation makes cable flexible and easy to handle
• Kit includes 6ea. 48" universal cables and wall rack