$150 - $200, Test and Measurement

60K pH Meter Kit by Jenco

pH handheld meter with BNC, LCD display and manual temperature compensation with two point calibration via potentiometers for ease of use. Case is rugged and splash resistant. AC/DC Powered.

Includes:

• 60K pH Handheld Meter
• 600P pH electrode
• 600D115 AC adapter
• 6007F carrying case

• All solid state design
• High accuracy
• LCD display
• Extra long battery life
• Battery low indicator
• Low cost
• Rugged carrying case
• Power: one 9V DC battery or 115/230v ac adapter

611K pH Analog Meter Kit by Jenco

pH Analog handheld meter with pH 2.0 to 12.00 mirrored analog scale usable over 0-14 pH range with manual temperature compensation. pH calibration is via knobs and pH slope calibration potentiometer, connector is BNC. AC/DC Powered.

Includes:

• 611 pH Analog Handheld Meter
• 600P pH electrode
• 611F carrying case

• Complete with combination electrode and buffer solution
• UL approved ac line adaptor
• One conventional 9v battery
• Manual temp. compensation
• Slope adjust
• High stability
• Large easy to read analog display
• Low power consumption
• High input impedance
• Battery low indication
• Rugged carrying case
• All solid state design
• Long battery life

6010MK Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010M Handheld pH/ORP Meter
• 600P pH electrode

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

WD-20250-00 Data Logging Light Meter with NIST Traceable Calibration by Digi-Sense

Designed for precision light intensity measurements indoors and out. Ensures safety and quality control requirements are met while increasing comfort levels and productivity. View measurement data in graphical formats as well as record and download data with included software for further analysis.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Expanded range of 0 to 400 kLux/0 to 40 kFc meets a wide range of application requirements
• Silicon photo diode with spectral response filter ensures precision accuracy of ±3%
• User-selectable Lux or Fc units for additional flexibility
• Max/Min and Hold functions let you easily control measurement readings
• Record up to 87,000 measurements for expanded data analysis capability
• Data logging software with graphical display provides quick and simple data interpretation
• USB connectivity allows downloading of data to PC
• Large backlit LCD for easy reading in dimly lit environments
• Auto power-off extends battery life

Applications

• Measure visible light from fluorescent, metal halide, high pressure sodium, or incandescent sources
• Monitor light levels for safe working conditions in factories, warehouses, office buildings, and schools
• Light source manufacturers: light intensity in R&D, design, production, QA/QC, installation, and field verification
• Perform outdoor commercial and residential lighting evaluations
• Measure roadway/sign/search lighting to ensure code compliance
• Light intensity control for photo studios, scenic design and cinematography

Includes

USB cable, software CD, canvas carrying case, three AAA batteries, and NIST-traceable certificate with data and uncertainties

WD-20250-14 CFM/CMM Vane Thermoanemometer with NIST Traceable Calibration by Digi-Sense

The Digi-Sense CFM/CMM Vane Thermoanemometer (Model 20250-14) measures air velocity, airflow (volume), and temperature. The large, easy-to-read backlit LCD includes primary and secondary displays plus numerous status indicators. The meter features 2 memory locations (1 for CFM and 1 for CMM) to store and recall commonly used area sizes. The instrument is fully tested and calibrated to NIST-traceable standards. Careful use of this meter will provide years of reliable service.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• User-selectable units of measure eliminate the need for conversion
• Measure air velocities up to 5900 ft/min (30 m/s) to cover a broad range of applications
• Measure air flow up to 999,900 CFM, 999,900 CMM
• Two memory locations, one CFM and one CMM, store commonly used vent area sizes to save you time
• Large dual-function 4-digit LCD with backlight for easy reading
• Auto power-off extends battery life
• Fits comfortably in your hand

Includes

Vane probe sensor with 3.9-ft (1.2-m) cable, three AAA batteries, and NIST-traceable calibration report with data supplied by InnoCal.

WD-20250-21 Professional Thermohygrometer with NIST Traceable Calibration by Digi-Sense

Ergonomic handheld thermohygrometers provide a fast and convenient way to accurately spot-check relative humidity and temperature in a wide range of environments and applications. When accuracy is a must in the field, in the lab, or on the process floor, these meters deliver dependable results every time!

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Large backlit LCD displays humidity, temperature, dew point, and wet bulb readings
• Feature Min/Max readings and Hold function
• User-selectable temperature readout in °C or °F
• Integrated humidity and thermistor (NTC) temperature sensor
• Auto power-off mode extends battery life
• Heavy-duty housing protects against knocks and jars
• Absolute humidity measurements

Applications

• HVAC
• Industrial
• Food industry
• Educational
• Laboratory
• R&D

0560 0460 460 Pocket Pro Compact Tachometer by Testo

testo 460 optically measures rpm, e.g. of ventilators and shafts. The measurement spot is displayed on the measurement object with an LED marking. Max./min. values are displayed directly at the press of a button. The backlit display allows the measurement values to be easily read out, even in unfavourable light conditions. testo 460 is very handy, small and easy to operate.

• Optical rpm measurement with LED measurement spot marking
• Max./min. values
• Incl. calibration protocol
• Protective cap for safe storage
• Including wrist strap and belt holder
• Display light
• Reflective markers

5005 pH/mV/Temp. Handheld Meter by Jenco

pH/mV/Temp. handheld meter with build in tabletop stand with LCD digital display. Meter has both ATC and manual temperature compensation. pH standardization calibration is via knobs and pH slope calibration is via potentiometer. Features include a voltage recorder output, reference input pin and BNC input connector. AC/DC Powered.

• All solid state design
• Fast input response
• Low drift and high stability
• Tilt stand
• Greater than 100db 50/60hz rejection
• Battery low indicator
• Extra long battery life
• Auto polarity mv measurement
• Analog recorder output
• Rugged carrying case
• UL approved ac line adaptor
• Aconventional 9v battery
• Manual and ATC for pH measurement
• 0 to 100.0 °C range of temperature measurement
• 0.5 high liquid crystal display readable under bright ambient conditions

6230N Handheld pH/mV/Temp Microprocessor Meter with 3-Point Calibration & RS-232 by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, RS-232-C IBM compatible communication interface and BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved.

• 3 point calibration
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• RS-232c output
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• Aconventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

14010 Anemometer for Signature Series by WeatherHawk

WeatherHawk wind speed sensor (anemometer) . Use as a replacement part only, not to be sold for use with equipment other than the WeatherHawk Signature Series weather station.

Three cup anemometer

Range: 1.75 -220 mph (0.78 - 492 m/sec)

Starting Threshold 1.75 mph (0.78 m/sec)

Material: Lexan

Shipping Weight: Less than 1 pound (0.45 Kg)

0560 0540 540 Pocket Pro Light Meter by Testo

The sensor of the testo 540 is adapted to the spectral sensitivity of the eye. This makes testo ideal for the measurement of light intensity. The Hold function allows an easy readout of the measurement values. Max. and min. values are displayed at the press of a button. testo 540 is very handy, small and easy to operate.

• Hold function and max./min. values
• Incl. calibration protocol
• Protective cap for safe storage
• Including wrist strap and belt holder
• Sensor adapted to spectral sensitivity of the eye
• Display light

392 Conductivity Transmitter, K=1, uS/mS Lo Multi-Range by Jenco

Conductivity Transmitter, panel mount, 1/8 DIN aluminum package, K=1.0 cell constant, isolated 4-20 mA analog transmitter current output, ATC is 10K thermistor for 5 to 55°C. Connections are to terminal blocks via spade lug connectors. 115/230V AC powered.

• Selectable wide measurement range
• Isolated 4-20ma output
• Automatic temperature compensation
• Selectable us/cm or ms/cm
• Adjustable zero
• High 50/60 hz noise rejection
• 1/8 DIN package

0632 3172 317-2 Gas Leak Stick by Testo

Highly practical gas leak detector for fast checks on gas pipe connections, with visual bar display.

• Shows gas concentration in visual bar display
• Sensor self-test following switch-on
• Audible confirmation of readiness to operate
• Increasing alarm sounds with increasing gas concentration
• Continuous sound if alarm threshold is exceeded
• Battery monitoring with optical display
• Self-test function

18550-1 25' Weatherproof RS232 Cable by WeatherHawk

Weatherproof Serial Cable (RS-232) in 25 foot (7.6 meter) length,. Cable has sanoprene jacket for weather and UV resistance, and nickle plated brass DB-9 connector shells. When fully seated and connected to a WeatherHawk serial I/O connector the connection is splashproof.

Typically used with permanently connected WeatherHawk 232 systems for real-time data connections to a home control system or computer for data display.

NOTE: Powered optical isolator or optical modem interface to Host PC is strongly recommended for ESD and lightning protection.

Ships as part of a system carton, or in one box 12 x 12 x 12 inches. Weight: Under 2 pounds (under 1 Kg)

25534 Visual Weather by WeatherHawk

Visual Weather for WeatherHawk Software - multi-site, single host Professional Version. This software allows you to creat reports, view real time data, check the collection status of the station, manage the weather station network, and export data.

0572 2156 External Temperature and Humidity Probe for Testo 160 E and 160 THE Wi-Fi Data Loggers by Testo

Normally, it is difficult to hide the data logger inside the display cabinet. The testo digital temperature / humidity probe (1.5" x 0.63" / 36 x 16 mm) can be hidden within the case base showing only a small paintable vent cap and the bushing's collar. The data from the probe transfer to the Wi-Fi logger over a thin 1.7 ft. / 0.6 m or an 8.2 ft. / 2.5 m extension cable. The maximum length of combined extension cables is 32.8 ft. / 10 meters.

Applications for the temperature and humidity probe

The temperature and humidity probe is ideal for use in museums, galleries and other exhibit application. Use the high-precision temperature and humidity probe (with external data logger) to measure the temperature and relative humidity in display cabinets. The supplied base plate bushing with an O-ring prevents leakage of external air. Monitor the micro-climate in your display cabinet to see if the artwork maintained at optimal environmental conditions, or if the silica gel pellets need replacing.

Smart probe calibration

The temperature and humidity probe offers maximum digital measurement reliability. As the processing of measuring values is done within the probe, the quality of the measurement is not affected by the length of the cable between the Wi-Fi data logger and the probe. The probe can be sent in for calibration on its own (without the data logger) because the calibration points are stored internally.

• Tiny temperature and humidity probe for use in display cases
• Doesn't effect the air exchange rate in the display case thanks to the wall bushing with an O-ring seal
• "Smart probe" holds internal calibration points
• Measurement range: 0 to 100% relative humidity; temperature 14 to 122 °F (-10 to +50 °C)

Includes:

1 x temperature and humidity probe with plug-in cable (length 1.7 ft. / 0.6 m), base plate mount bushing, and factory calibration document.