$150 - $200, Test and Measurement

SCT-108.005.03 SCT-EC-MINI Conductivity Mini Controller by ScichemTech

Includes:

• Conductivity probe
• Fixation clamps
• Instruction manual

Features:

• SCT EC MINI online Conductivity controller is an panel Instrument for online monitoring of Industrial process conductivity
• Simple and compact design
• Three ranges of conductivity measurements in on single controller
• Range switch over and constant check can be easily adjusted from the rear panel.
• Unique signal collecting and processing technology.
• Special think film circuit for accurate measurement and stable operations.
• Linearized data and automatic temperature compensations.
• In line measurement and control of conductivity.
• Conductivity electrode is supplied with 5 meter cable.

20250-63 AC/DC Clamp Meter with Bluetooth® Connectivity by Digi-Sense

Using our free Digi-Sense D/S Meter app, this AC/DC clamp meter with Bluetooth® technology allows you to transmit data directly to your Android or iOS device. Now you can view data at a safe distance from dangerous equipment or hazardous locations and even use your smart device as a real-time secondary display for checking measurements, eliminating the need to write down readings on paper. The results are automatically stored in the app with a date-and-time stamp and can be saved as a CSV file and emailed for future reference, manipulation, or analysis to help determine trends and conditions over a long period of time. Use the app to attach photos and notes to the records creating a clear reference point for your work - ideal for record keeping at large sites.

The AC/DC clamp meter measures AC current to 1000 A AC, voltage (AC and DC), resistance, capacitance, frequency, temperature, duty cycle, and continuity. Special functions include auto ranging, data Hold, Max/Min readings, diode test, audible continuity check, over-range indication, low-battery indication, and auto power-off. The 1-3/16" (30 mm) jaw opening is ideal for use in small compartments or boxes with tightly arranged electrical wires. The meter also offers True RMS for more accurate current readings, and temperature measurement via a type K thermocouple.

The instrument is fully tested and calibrated to NIST-traceable standards for reliable measurements right out of the box, saving you time and money!

Key Features

• Get the most out of your data with our user-friendly mobile app
• Unlimited data storage based on smart device capacity
• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards
• Rugged double-molded housing provides increased durability
• Electronic overload protection prevents damage
• Large backlit LCD permits viewing in low-light conditions

Includes

Test leads, type K thermocouple, carrying case, 9 V battery, and NIST-traceable calibration.

SCT-108.005.02 SCT-ORP-MINI ORP Mini Controller by ScichemTech

Includes:

• ORP probe
• Fixation clamps
• Solution
• Instruction manual

Features:

• SCT ORP MINI online ORP controller is an Industrial online analysis and monitoring instruments
• Simple and Compact design
• Meets all the International Standards
• Easy to Install, Operates safety with less maintenance.
• ORP Electrode Supplied with standard 10 meter cable, Measurement up to 40 meters.
• Large and clear display for easy reading
• Inlin e measurement and control of ORP values

NX41-1026 Nautiz X41 Rotating Wrist Mount with Bluetooth Trigger Button by Handheld

Rotating wrist mount with BT-trigger for the Nautiz X41.

Features

• BT-trigger

Technical specifications

• BT: V4.0, Class 2, 10m
• Battery runtime: 400hrs~
• Charging time: <2hrs
• Charging input: DC 5V 67 mA
• Operational temperature: -10C to 50C

Compatibility

• Nautiz X41

0560 8312 830-T2 IR Thermometer, 12:1 optics & dual laser by Testo

The testo 830 is a universally applicable infrared thermometer for non-contact measurement of surface temperatures in trade and industry. Thanks to a new processor, and therefore better resolution, even more precise measurements are now possible. Temperature can now be recorded to an accuracy of 0.1 °C. Thanks to the min./max. function, the limit values of the last measurement can be displayed and even better monitored.

• 10:1 focus
• Backlit display
• Audible/visual alarm
• Emissivity adjustable from 0.2 to 1.0
• Fast readings
• Laser sighting
• Adjustable alarm limits
• Audible and visual alarm if limits are exceeded
• User-friendly thanks to "pistol design"
• Backlit display
• Adjustable emission factor (0.1 to 1.0)
• Display of current value and Hold value

93820-40 Industrial RTD Probe 4" Length, 1/2" Thread by Digi-Sense

Industrial RTDs assemblies produce greater accuracy are ideal for use in industrial applications, chemical processes, production lines, ovens, furnaces and vessels. The probes conductor is made of 24 gauge cooper wire and is encased with FEP insulation, and has a 316 stainless steel sheath. Featuring a standard size protection head with a gasketed cap to seal out dust and moisture and houses a ceramic terminal block. Head has a 3/4" NPT (F) opening on the side for easy connection to electrical conduit. 316 stainless steel thermowells are included in assemble and are ideal for applications where removing of the probe without draining the vessel is necessary.

94460-16 Traceable Excursion-Trac™ Data Logging Thermometer with Calibration; 1 Stainless Steel Probe by Digi-Sense

Easily monitor temperatures overnight or for any time period - minimum and maximum temperatures are stored until the memory is cleared. Set high and low alarms in 1° increments; alarm sounds when temperature rises above or falls below set points. The alarm tracking feature stores data for up to 10 different alarm events detailing when the alarm state occurred, as well as when the unit returned within range. Alarm state indicator includes visual LEDs, audio alerts, and flashing LCD segments.

Transfer data recorded in a CSV format to any computer via a USB flash drive - no software is required. Simply clear memory after downloading data to USB drive. Unit continues to record new data while downloading old data. Other status indicators include low-battery, memory full, USB data transfer, and active alarm state. All probes are attached to a 10-ft (3-m) microcable that permits a door to close on it.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Durable stainless steel probe withstands both low and high temperatures and are ideal for measuring temperatures of air, liquids, and semi-solids. Sensor stem measures 6.25"L x 1/8" dia.

Key Features

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Memory can be cleared after downloading data and alarm events
• Set limits for and store up to 10 unique alarm events
• Smart-Alarm™ with visual/audible alarm continues to alert even if conditions return to normal range
• Triple-display - shows high, low, and current temperature simultaneously
• Measure air/gas, liquids, or semisolids

Includes

stainless steel probe with 10-ft cable, flip-open stand, hook-and-loop strips, magnetic strips, wall-mount receptacle, batteries, and NIST-traceable calibration certificate with data.

37955-14 Traceable® Vane Thermoanemometer/Hygrometer Pen with Calibration by Digi-Sense

The Digi-Sense family of air measuring instruments offers different levels of functionality, allowing you to select the one that best meets your application needs and budget. All models measure airflow and temperature.

The compact meters are designed for intuitive, instruction-free operation and have a Hold button to freeze display readings for easy recording of results. Min/Max readings are also captured. The tough ABS plastic housing and membrane keypad allow the anemometers to be used in harsh environments. A high contrast LCD display with 3/8" digits make it easy to read.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 37955-14 adds humidity/dew point measuring capability.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Easy to grip design
• Easy-to-use keypad

Includes

Four AAA batteries and NIST-traceable calibration certificate with data.

378JF Digital Thermometer Controller with Analog Voltage Output, Range 0 to 1000 °F by Jenco

Panel mount digital thermometer controller with analog voltage output of 1 mV per count, ± 3%, bright red LED display, 1/8 DIN plastic housing, hysteresis is ± 3°C or ± 5°F. Proportional Band-Width control from 5%, 378KF, 10% 378 KC/JF and 20% of span for 378 JC. Features manual adjust reset. Cycle time is 20 seconds ± 3 seconds. 115/230V AC operation.

6231N pH/mV/Temp. Microprocessor Handheld Meter by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved

• 3 point calibration
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• A conventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

0516 0012 Transport Case for Manifolds by Testo

• Robust case for the secure transport of your equipment
• Provides space for measuring instrument and accessories

378JC Digital Thermometer Controller with Analog Voltage Output, Range 0 to 550 °C by Jenco

Panel mount digital thermometer controller with analog voltage output of 1 mV per count, ± 3%, bright red LED display, 1/8 DIN plastic housing, hysteresis is ± 3°C or ± 5°F. Proportional Band-Width control from 5%, 378KF, 10% 378 KC/JF and 20% of span for 378 JC. Features manual adjust reset. Cycle time is 20 seconds ± 3 seconds. 115/230V AC operation.