Shutters Hoods and Intakes, Schaefer

Shutter Mounting Hardware Kit

WS-160 16" Aluminum Shutter by Schaefer

Schaefer aluminum shutters allow airflow in a single direction and are used as building air inlets to feed Schaefer exhaust fans, or on exhaust fans to prevent air entry when the fan is not operating.

Aluminum shutters are built tough for long life in the most demanding environments, all at an affordable price.

Features and Benefits:

• Constructed of heavy-duty brushed aluminum for corrosion resistance and greater durability
• Interlocking louvers for maximum weather protection and lightweight for high efficiency and easy installation
• Tie bar to eliminate shutter flapping
• Shutter motor kits available for automated opening/closing

MIT-1200 12" Motorized Intake by Schaefer

Optional integrated shutter motors are available for Schaefer exterior shutters.

The white exterior grade PVC shutters are maintenance free, resistant to rust and corrosion and have an efficient, aerodynamic design. Louvers are curved for a tight seal when closed and corners are fused together for exceptional strength and durability.

Small Shutter Retrofit Kit

SHUTTERMOTOR-LG Shutter Opener for Large Shutters by Schaefer

Use shutter motors to open a shutter wider to improve airflow when in use or to keep the shutter closed when not in use. Easy to install and operate. Shutter motor kits for large and small shutters available.

Features and Benefits:

• Shutter size with wind: N/A
• Shutter size against wind: Over 48"

PS16 16" PVC Shutter by Schaefer

Schaefer PVC shutters are maintenance free, resistant to rust and corrosion and have an efficient, aerodynamic design. Louvers are curved for a tight seal when closed and corners are fused together for exceptional strength and durability. Optional integrated shutter motors available.

The 115 volt, 1/2 amp gear motor and arm assembly opens shutter when energized and closes shutter when de-energized. Nylon bearings will not corrode and never needs lubrication.

SHUTTERMOTOR-SM Shutter Opener for Small Shutters (PKA SM1530) by Schaefer

Use shutter motors to open a shutter wider to improve airflow when in use or to keep the shutter closed when not in use. Easy to install and operate. Shutter motor kits for large and small shutters available.

Features and Benefits:

• Shutter size with wind: All sizes
• Shutter size against wind: 48" and under

Inlet Mounting Hardware Kit

FH-1200 12" Fiberglass Weatherhood with Mounting Flange by Schaefer

• Draws outside air through walls up to 6" thick
• Mounts flush to an interior wall
• Weatherhood protects bird screened inlet from the elements
• Durable polyethylene housing with insulated damper door and air-stop door adjust airflow volume and direction with the seasons

WS-570 57" Aluminum Shutter by Schaefer

Schaefer aluminum shutters allow airflow in a single direction and are used as building air inlets to feed Schaefer exhaust fans, or on exhaust fans to prevent air entry when the fan is not operating.

Aluminum shutters are built tough for long life in the most demanding environments, all at an affordable price.

Features and Benefits:

• Constructed of heavy-duty brushed aluminum for corrosion resistance and greater durability
• Interlocking louvers for maximum weather protection and lightweight for high efficiency and easy installation
• Tie bar to eliminate shutter flapping
• Shutter motor kits available for automated opening/closing

Baffle Assembly for CI-1300

HWKIT-LGSHUTTER Large Shutter Retrofit Kit by Schaefer

Use shutter motors to open a shutter wider to improve airflow when in use or to keep the shutter closed when not in use. Easy to install and operate. Shutter motor kits for large and small shutters available.

Features and Benefits:

• Available for retrofit applications on shutters over 48"
• Does not include shutter motor

PS22 22" PVC Shutter by Schaefer

Schaefer PVC shutters are maintenance free, resistant to rust and corrosion and have an efficient, aerodynamic design. Louvers are curved for a tight seal when closed and corners are fused together for exceptional strength and durability. Optional integrated shutter motors available.

The 115 volt, 1/2 amp gear motor and arm assembly opens shutter when energized and closes shutter when de-energized. Nylon bearings will not corrode and never needs lubrication.

CI-1300 Ceiling Air Intake by Schaefer

• Draws fresh air from above an interior ceiling
• Mounts flush with ceiling and extends 16" into attic
• Durable polyethylene housing with insulated damper doors
• Normally closed damper doors open wider with higher airflow
• Fits between 16" or 24" ceiling joists

FH-1600 16" Fiberglass Weatherhood with Mounting Flange by Schaefer

• Draws outside air through walls up to 6" thick
• Mounts flush to an interior wall
• Weatherhood protects bird screened inlet from the elements
• Durable polyethylene housing with insulated damper door and air-stop door adjust airflow volume and direction with the seasons

FH-2000 20" Fiberglass Weatherhood with Mounting Flange by Schaefer

• Draws outside air through walls up to 6" thick
• Mounts flush to an interior wall
• Weatherhood protects bird screened inlet from the elements
• Durable polyethylene housing with insulated damper door and air-stop door adjust airflow volume and direction with the seasons

Baffle Assembly for HI-1000P

HI-1000P Hallway Air Intake for Interior Walls, Poly by Schaefer

• Designed to control airflow between two interior spaces
• Mounts flush to an interior wall up to 6" thick
• Durable polyethylene housing with insulated damper door and air deflectors adjust airflow volume and direction with the seasons

MIT-1600 16" Motorized Intake by Schaefer

Optional integrated shutter motors are available for Schaefer exterior shutters.

The white exterior grade PVC shutters are maintenance free, resistant to rust and corrosion and have an efficient, aerodynamic design. Louvers are curved for a tight seal when closed and corners are fused together for exceptional strength and durability.

MIT-2000 20" Motorized Intake by Schaefer

Optional integrated shutter motors are available for Schaefer exterior shutters.

The white exterior grade PVC shutters are maintenance free, resistant to rust and corrosion and have an efficient, aerodynamic design. Louvers are curved for a tight seal when closed and corners are fused together for exceptional strength and durability.

MIT-2200 22" Motorized Intake by Schaefer

Optional integrated shutter motors are available for Schaefer exterior shutters.

The white exterior grade PVC shutters are maintenance free, resistant to rust and corrosion and have an efficient, aerodynamic design. Louvers are curved for a tight seal when closed and corners are fused together for exceptional strength and durability.

PS12 12" PVC Shutter by Schaefer

Schaefer PVC shutters are maintenance free, resistant to rust and corrosion and have an efficient, aerodynamic design. Louvers are curved for a tight seal when closed and corners are fused together for exceptional strength and durability. Optional integrated shutter motors available.

The 115 volt, 1/2 amp gear motor and arm assembly opens shutter when energized and closes shutter when de-energized. Nylon bearings will not corrode and never needs lubrication.

PS14 14" PVC Shutter by Schaefer

Schaefer PVC shutters are maintenance free, resistant to rust and corrosion and have an efficient, aerodynamic design. Louvers are curved for a tight seal when closed and corners are fused together for exceptional strength and durability. Optional integrated shutter motors available.

The 115 volt, 1/2 amp gear motor and arm assembly opens shutter when energized and closes shutter when de-energized. Nylon bearings will not corrode and never needs lubrication.

PS18 18" PVC Shutter by Schaefer

Schaefer PVC shutters are maintenance free, resistant to rust and corrosion and have an efficient, aerodynamic design. Louvers are curved for a tight seal when closed and corners are fused together for exceptional strength and durability. Optional integrated shutter motors available.

The 115 volt, 1/2 amp gear motor and arm assembly opens shutter when energized and closes shutter when de-energized. Nylon bearings will not corrode and never needs lubrication.