Over $5000

UV-IR Flame Detector for Hydrocarbon Fires. With HD Camera

*Please note we can only ship RKI products to customers within the United States

UV-IR Flame Detector for Hydrocarbon Fires. With HD Camera. HART® 7 Digital protocol providing Advanced detector Comms, Event Push Notification and HART® 7 Wireless ready and SIL 2.

*Please note we can only ship RKI products to customers within the United States

UV-IR Flame Detector for Hydrocarbon Fires. With HD Camera. Outputs include Tri-Colour LED, 4-20mA with HART® 7, 3 x SPST relays - Fire Alarm, Fault & Auxiliary, Modbus RS485. SIL 2.

*Please note we can only ship RKI products to customers within the United States

UV-IR Flame Detector for Hydrocarbon Fires. With HD Camera. HART® 7 Digital protocol providing Advanced detector Comms, Event Push Notification and HART® 7 Wireless ready and SIL 2.

*Please note we can only ship RKI products to customers within the United States

UV/IR HD Flame Detector for Hydrocarbon Fires. With HD Camera. Outputs include Tri-Colour LED, 4-20mA with HART® 7, 3 x SPST relays - Fire Alarm, Fault & Auxiliary, Modbus RS485. Near IR (greyscale) video output via Ethernet TCP/IP, Composite NTSC or PAL user selectable. SIL 2.

*Please note we can only ship RKI products to customers within the United States

Kit, RAEPoint With Alarm Bar, Remote, 2.4G

flame detector - Flame simulator

Wall Mount Base Station With Antenna and Coax Display, Modbus-RTU Output, 900MHz Mesh

TW-XP "UD" Monitor Housing with Window

OPTICAL ASSY,W/CFG KIT,1.25mA HART

FP-300A-PH3 FP-300A Paper Tape Machine for 0-500 ppb or 0-900 ppb PH3, FCL-002E, with 1/4" +6mm fittings by RKI Instruments

RKI's paper tape monitors utilize highly sensitive colorimetric tapes to achieve interference free detection at low PPB and PPM levels Ammonia, Arsine, Chlorine, Diborane, Hydrogen Chloride, Hydrogen Fluoride, Hydrogen Sulfide, Phosphine, Silane. The FP-300 is equipped with an easily replaceable tape. This model is equipped with a digital display showing the type of gas and concentration in PPM or PPB. The FP-300 will also display remaining tape life as well as an end of tape alarm.

The FP-300 has audible and visual alarms, as well as alarm relay contacts and 4-20mA output. A unique tape saver mode" extends tape life in applications where high background gas levels may be present.

The FP-300 meets and exceeds OSHA and NIOSH compliance requirements, and does not respond to interfering gases (hydrocarbons, alcohols, solvents, CO, etc.) that may be present in industrial/manufacturing environments.

Features:

• Small and compact
• Highly sensitive and ideal for low gas concentrations (ppb detection)
• Interference-free detection
• Easy detection tape replacement with plug-in cassette
• Tape remainder display and tape end warning alarm provided
• Easily transportable

Applications:

• Scrubbers
• Environmental Monitoring
• Semiconductor Fabs
• Manufacturing
• Detecting uncaptured gas from scrubber

*Please note we can only ship RKI products to customers within the United States

GL-50-E-AA Eddington Glycol Feed System, 50 Gallon with Audible Alarm by Quantrol

The J. L. Wingert Company is proud to offer four (4) varieties of standard Glycol packages. Whether your needs are for an Industrial continuous use or a smaller Residential Radiant Heat application, Wingert Glycol Systems can meet your requirements.

Proudly manufacturing since 1964, the J. L. Wingert Company understands and delivers the quality expected in today's marketplace. Designed for ease of use, with the highest standard of individual components, these Glycol Systems stand the test of time.

With the flexibility of design, production and aftermarket support in the United States, the J. L. Wingert Company has the capabilities to modify any system to meet your specifications. Let us work with your team to get the correct fit for your application.

ECONOMY GLYCOL SYSTEM - Model GL

• Standard with 1/3 HP Rotary Vane Pump, Tank Stand, Tank and Control Panel
• Numerous options including PLC Interface
• Expansion Tank optional
• Optional High-Temperature Models

ECONOMY GLYCOL SYSTEM - Available on most Models

• Easy to adjust pressure settings
• Available with remote alarm system and notification
• Lockable NEMA 4X control panel with clear cover
• Backlit LCD Display shows system status, current pressure and level status

TRI-LEG GLYCOL SYSTEM - Model TGL

• Standard with 1/4 HP Rotary Vane Pump, Tri-Leg Stand, Tank and Control Panel
• Same options as Economy Glycol
• Smaller Foot Print
• A Variety of pressure ranges and sizes

WALL MOUNTED GLYCOL SYSTEM - Model WGL

• Freight friendly - ships UPS
• Available for various size drums / tanks
• Optional Digital Control Panel available
• Quick switch-out to new drums / tanks

COMPACT GLYCOL SYSTEM - Model CGL

• Available in a variety of sizes
• Patent Pending Integrated Funnel allows for ease of filling
• Ready for field installation
• Easy access to pump and fuse box

HRR-A300579AB0-000 Basic diffusion: BLE only / Americas / BLE is included in all units / CO2 NDIR, PID (10.6 eV), CAT LEL, CO, H2S / non-GPS by BW Technologies

Honeywell BW™ RigRat is so easy to use that workers can operate it with confidence, trusting it to alert them to gas threats in their proximity — indoors and out, in temperatures from -40 to +140°F (-40 to +60°C). Honeywell BW™ RigRat delivers:

• Up to 8 weeks of runtime on a single charge. Longer runtime than any area monitor in its class.
• Up to six slots for interchangeable gas sensors. Choice of electrochemical, PID, infrared, and catalytic bead sensors (measuring percent LEL and percent by volume).
• Integrated Noise sensor and Metrological data sensors.
• Enhanced configurations with programmable input and output.
• Approval for explosive atmosphere. Certified for ATEX/IECEx Zone 0 and CSA C1D1.
• Flexible applications. Zone declassification, turnarounds, confined space, routine maintenance, fence line and more. Available with pump for remote sampling.
• One-button operation. Grab and go. No expertise required.
• Simple setup with a smartphone. Easy mobile app for alarm set points, calibration records and more.
• Added protection. Alerts workers to nearby gas leaks, whereas personal detectors cover only the breathing zone.

FEATURES AND BENEFITS

• WIRELESS SAFETY PERIMETER: Position several Honeywell BW™ RigRat monitors to form a wireless safety perimeter.
• REMOTE MONITORING: Use with Honeywell's remote monitoring software to see gas readings, location and other data from any device with an internet connection — for fast, informed decisions. Add an optional noise sensor or meteorological sensor.
• HONEYWELL TOUCHPOINT™ PLUS COMPATIBLE: Use with the Honeywell Touchpoint™ Plus controller for visibility on Honeywell BW™ RigRat monitors and workers' personal detectors.

OTHER HONEYWELL BWTM RIGRAT FEATURES:

• Line power for extended runtime in the field
• I/O ports providing additional input capabilities and local executive activation.
• Inert mode that prevents alarm in normal ambient air.
• Large, easy-to-read display
• Rugged, weatherproof design, with optional protective cage

Part Number: HRR-A300579AB0-000

IR400 Point IR Gas Detector by MSA

The IR400 Infrared (IR) Point Detector is a hydrocarbon gas detector that continuously monitors combustible gases and vapors within the lower explosive limit (LEL) and provides alarm indication. It features an industry-leading response time of less than 3 seconds, even with a splash guard installed. All electronics are contained within an explosion-proof housing so that the IR400's detector information can be processed locally. Configurations with analog output, Modbus and HART are also available.

• Industry-leading speed & response: T90 ≤ 3 seconds even with splash guard installed
• No routine calibration required reducing maintenance costs
• Industry standard 4-20 mA output provides remote alarm and fault indication
• Multiple communication outputs provide complete status and control capability in the control room
• Heated optics eliminate condensation
• Dirty optics indication discriminates between true fault and cleaning requirements
• Fast calibration times reduce amount of cal gas required which lowers maintenance time and costs

Applications

• Chemical plants
• Compressor stations
• Drilling and production platforms
• Fuel loading facilities
• Oil well logging
• LNG/LPG processing and storage facilities
• Refineries
• Wastewater treatment facilities

FGD,XMTR (OP),SOURCE,STACK,KIT

MMT-LB01 Midas-M 4-20mA and TCPIP Modbus Transmitter with Tube by Honeywell Analytics

Bringing new visibility, reliability, and easeof-use to gas detection in semiconductor processing and industrial manufacturing.

An easy-to-use, cost-effective addition to the Honeywell gas detection portfolio, the Honeywell Midas®-M Gas Detector uses reliable sensor technology to detect more than 35 key toxic, ambient, and flammable gases - easily, quickly, and error-free.

The device monitors points up to 30 meters (100 feet) away while using patented technology to regulate flow rates and ensure error-free gas detection.

The standard power supply and communications capabilities include three onboard relays (Form C), 0 mA to 21 mA analog output, and Modbus®/TCP Ethernet digital outputs for easy connectivity to control and alarm systems' ports for optimal connectivity and service interaction.

With flexible features and options, the Midas-M Gas Detector works right out of the box and configures easily to meet your needs. Each plug-and-play sensor cartridge is pre-calibrated, so it's ready when you are. That means longer sensor life, quick-and-easy replacement, and no operator error due to incorrect or depleted sensors. With the Midas-M Gas Detector, customers can get extended sensor calibration periods, patented diagnostics, and lower cost of ownership.

FEATURES AND BENEFITS

• CLEAR VISIBILITY: The Midas-M Gas Detector is equipped with bright LEDs and an intuitive interface that provides instant alerts to gas readings or alarm levels.
• CALIBRATION COMPLETED: Factory-calibrated sensors reduce need for frequent gas testing.
• EASY INSTALLATION: Compact in size making it suitable for crowded, complex process environments where space is at a premium, the Midas-M Gas Detector is simple to install with its plugand-play capability.
• POE PROTOCOL: The detector includes the innovative Power over Ethernet (PoE) protocol - a single Ethernet connection for all power, control and communication requirements.
• INTEGRATED SECURITY: The Midas-M Gas Detector's interface includes passwordprotected menus to maintain system integrity.

APPLICATIONS

• Semiconductor processing
• Light industrial manufacturing
• University laboratories
• Aerospace
• Wastewater

M011-0034-000 MP186 Butadiene (Red Boot) Kit by mPower Electronics

The NEO is one of the most advanced handheld VOC (Volatile Organic Compound) monitors available for ppb (parts per billion) detection. VOCs include a variety of chemicals such as benzene, alcohols, fuels, paint thinners, industrial solvents and many others, which can have short and long-term adverse health effects. Measuring these compounds is essential for worker protection in industries like oil & gas, fire & hazmat, pharmaceuticals, paints & adhesives, and many others. In addition, VOC monitoring is useful chemical process control, detecting leaks and other releases to the environment, and in measuring indoor air quality. The NEO offers several models from the most sensitive 1 ppb to a high range up to 15,000 ppm for different applications, and a filter tube version (NEO BENZ) for benzene-specific or butadiene-specific measurements. In addition to the standard continuous read-out, a Leak Detection and Repair (LDAR) mode is included. Novel designs of the Photo-ionization Detector (PID) and Ultraviolet (UV) lamp provide outstanding sensitivity, stability and reproducibility. Includes real-time data monitoring using mPower Suite software via cable to a PC or via Bluetooth to an Android phone or tablet.

Features, Functions and Benefits

• Smaller and lighter weight than comparable PIDs
• Most stable ppb-level PID on the market
• Outstanding linearity over full measurement range
• Easy charging on laptop or other USB port
• USB Micro Charger; combination USB-m charging and communications cable
• Powerful battery (run time 24 hours)
• Bluetooth Low Energy (BLE) connectivity standard
• Search Mode for LDAR Sampling
• Filter tube version for benzene- or butadiene-selective measurements
• Large backlight graphic display
• Lamp glow indicator
• Rugged, stainless-steel housing with rubber outer boot

M027-0001-R12 UNILite MP112 Disposable Single Gas Detector, H2S, 100 PPM Range, 0.1 Resolution, Run time remaining Display (Min. Order 100) by mPower Electronics

The UNI Lite MP112 is a disposable or maintenance-free version of carbon monoxide (CO) and hydrogen sulfide (H2S) single gas detectors with up to 2 years continual operation. The detectors have large LCDs providing maximum readability in the field and are made with six bright red LEDs allowing for quick alarm notification. Constructed of strong and durable material, the UNI Lite is designed to be comfortable yet drop-resistant. The UNI Lite can easily be bump tested and calibrated either manually or using the 4-Bay CaliCase docking station.

Features, Functions and Benefits

• Simple one-button GO, NO-GO!
• Large LCD
• 4-size CO and H2S sensors
• 50 events logging
• IP rating: IP-67
• Low & High alarms
• Six bright red flashing LEDs
• 2/3 AA Lithium battery
• No maintenance or part replacement

M027-0002-R12 UNILite MP112 Disposable Single Gas Detector, H2S, 100 PPM Range, 0.1 Resolution, Run time remaining Display (Min. Order 100) by mPower Electronics

The UNI Lite MP112 is a disposable or maintenance-free version of carbon monoxide (CO) and hydrogen sulfide (H2S) single gas detectors with up to 2 years continual operation. The detectors have large LCDs providing maximum readability in the field and are made with six bright red LEDs allowing for quick alarm notification. Constructed of strong and durable material, the UNI Lite is designed to be comfortable yet drop-resistant. The UNI Lite can easily be bump tested and calibrated either manually or using the 4-Bay CaliCase docking station.

Features, Functions and Benefits

• Simple one-button GO, NO-GO!
• Large LCD
• 4-size CO and H2S sensors
• 50 events logging
• IP rating: IP-67
• Low & High alarms
• Six bright red flashing LEDs
• 2/3 AA Lithium battery
• No maintenance or part replacement

VERI5000 Hydrajaws cable line tester kit

SWAGE PRESS KIT BP BATTERY

RESCUEAIRE II, HP, 4500, STC, WITH CYL

RESCUEAIRE II, HP, 4500, STC, LESS CYL

RESCUEAIRE II, HP, 4500, PTC, WITH CYL