GasAlertMicroClip XT, Multi-Gas Monitors

MC-CK-DL Deluxe Confined Space Kit for the GasAlertMicroClip, GasAlertMicroClip XT, and GasAlertMicroClip XL versions

What comes with it?

Inside you will find:

• Regulator (REG-0.5)
• IR connectivity kit with Fleet Manager Software (GA-USB1-IR)
• Carrying strap (GA-ES-1)
• Test cap and hose (MC-TC-1)
• Manual aspirator pump kit with 1 ft probe (MC-AS01)
• Carrying case (MC-CK-CC)
• Auxiliary Filter Kit (MC-AF-K1)
• Leather carrying case (MC2-LC-1)

Part Number: MCLCDK1

SR-W-MP75C Replacement MICROpeL Combustible (LEL) Sensor

BW Technologies Test Cap and Hose Replacement (1 foot or .3 meters)

For customization and maintenance, BW Technologies manufactures a variety of replacement parts and accessories. The product offerings are cost effective solutions that help to extend the life of the device and preserve the integrity of the equipment. The BW Technologies Test Cap and Hose Replacement contain a hose that is approximately 1 foot in length (or .3 meters) and a secure cap. To ensure compatibility, please consult your device's specification sheet.

Part Number: MCTC1

Part Number: MC2FPCB1

SR-H-MC Replacement MICROceL Hydrogen Sulfide (H2S) Sensor

BW Technologies Replacement Oxygen (O2) Sensor

The BW Technologies Replacement Oxygen Sensor is a highly effective replacement accessory. It has a sensor range of 0 to 30% with a 0.1% resolution. The replacement sensor is operational in a temperature range of -4 to 122 degrees Fahrenheit. It is compatible with some of the BW Technologies devices. BW Technologies replacement sensors are reliable and dependable and backed by solid performance. To ensure optimal compatibility, please consult your product specification sheet.

Part Number: SRX10C1

BW Technologies Replacement Power Adaptor

BW Technologies manufactures a range of accessories and replacement parts for its vast collection of portable gas detection devices. For GasAlert detectors, BW Technologies offers numerous replacement products including the replacement power adaptor. The replacement adaptor is ready and able to ensure your BW Technologies device always has power. Simply plug the adaptor into the device and watch for the battery icon on the display to show that the battery is fully charged. This particular item and product number is specific to North American power supplies.

Part Number: GAPA1NA

BW Technologies Dummy Sensor for 3-Pin O2 or 3-Pin Twin Tox Locations

The BW Technologies Dummy Sensor for 3-Pin O2 or 3-Pin Twin Tox Locations is a dummy sensor that acts as a placeholder for the device. This dummy sensor does not detect gases and does not initiate the alarm sequence on the device. The sensor can be used for training and storage purposes. This cost effective dummy sensor fits several BW Technologies products.

Part Number: SRDUMM1

DOCK2-0-1C1P-00-G GasAlertMicroClip XT Docking Module (Charging with Power Supply) by BW Technologies

The BW Technologies GasAlertMicroClip XT Docking Module is an ideal and cost effective solution for bump tests and calibration. The lightweight and compact module easily fits on a desktop and includes a power supply for North American power outlets. This device is also an easy solution for maintaining compliance with safety standards and regulations. The unit operates with a 6V wall adaptor or 4 C-cell batteries. The device is compatible with the GasAlertMicroClip XT portable gas detection instrument.

Part Number: DOCK201C1P00G

Part Number: MC2SS

MC-CK-CC Carrying Case for GasAlertMicroClip

This case is made from durable aluminum and rugged enough to withstand most environments. The case can be carried with the attached handle or slung over your shoulder with the included 4 ft strap.

Roomy and spacious enough to carry all of your accessories and the GasAlertMicroClip. The foam cut-outs have custom inserts for the calibration cylinder, regulator, detector, sampling hose, screwdrivers, connectivity kit, and large pockets hold miscellaneous tools and items.

Keep your monitor safe and in like-new condition by keeping it in this specially designed case.

BW Technologies Vehicle Power Adaptor

BW Technologies produces a variety of on the go accessories for their product lines. The BW Technologies Vehicle Power Adaptor allows users to charge their detectors easily in any vehicle. The vehicle power adapter is easy to use and convenient. Simply plug the adapter into the device, and then plug the other end into the vehicle power port. The adapter has an LED light that will indicate when the detector is fully charged. The power adaptor is suitable for 12V applications.

Part Number: GAVPA1

BW Technologies Chest Harness

BW Technologies has a wide range of accessories designed to improve the usability of their product lines. The BW Technologies Chest Harness does just that. Simply secure the harness to your body and insert the monitor into the harness. The monitor will fit securely in place on your chest and near your breathing zones. The chest harness is comfortable and tough enough to withstand modern work environments. With the chest harness, the device can continue to be hands free.

Part Number: GACH2

BW Technologies IR Connectivity Kit with Fleet Manager II Software

The BW Technologies IR Connectivity Kit connects your BW Technologies device to your computer. The kit also includes the Fleet Manager II Software. The software allows users to download data directly from their device to their computer. Downloading is quick and easy with the connectivity kit. From here, users can create and run a variety of reports that help with site assessments and analysis. The information can also be easily archived for future referencing.

Part Number: GAUSB1IR

MC2-00H0-B-NA GasAlertMicroClip Extreme Detector Hydrogen Sulfide (H2S) - Black Housing by BW Technologies

When purchasing a gas and atmospheric detection device, buyers should evaluate their needs to determine the most appropriate device on the market. At BW Technologies by Honeywell, safety and reliability are top priorities. After years of research and development in gas and hazardous atmosphere detection, BW Technologies has introduced the GasAlertMicroClip XT into the gas monitoring market. Its sleek design and affordable price point place this gas detection system at the top of the market.

When looking for a safe, affordable, and reliable gas monitoring system, look no further than the GasAlertMicroClip XT. The compact and portable design offers the most affordable protection in gas monitoring systems. Using the latest technology, and intuitive user friendly features, users are able to work confidently with knowledge that the GasAlertMicroClip XT will appropriately alert them to possible gas hazards.

Simple design and portability

At approximately 6 ounces, BW Technologies by Honeywell has introduced a safe, reliable, and highly portable gas detection unit. The slender and compact design is met with a bright yellow casing to help ensure that the device is not left behind on the worksite. The casing also helps to make the device water resistant and includes a built in concussion proof boot. In line with its simple design, the GasAlertMicroClip XT features a one button design that is both tamper-proof and intuitive.

Standard features

The exclusive IntelliFlash feature alerts users and those nearby that the GasAlertMicroClip XT is operating and functional. The LCD screen also consistently displays real time gas concentration levels. Like many products developed by BW Technologies, the MicroClip features a standard triple alarm system designed to alert users visually, audibly, and with vibrations. This multifaceted alarm system ensures that users and those nearby are well alerted of possible dangers regardless of visual or hearing impairments, including loud worksites.

Optional features and accessories

The GasAlertMicroClip XT also allows for users to customize certain features. Features such as alarm settings, display settings, test and calibration settings, start-up options, sensors, overrides, and measurements can be manually altered by the user. The MicroClip is compatible with the MicroDock II automatic test and calibration system. Additional accessories can be purchased including auxiliary filter kits, IR connectivity kits, and five unit cradle charges. By allowing users to customize various features and options, BW Technologies is ensuring that its gas detectors will continue to provide value to its buyers for many years.

Specifications

The GasAlertMicroClip XT monitors H2S, CO, O2, and combustible gases at varying measurement ranges. The device is compact at 4.4 inches long by 2.4 inches wide and 1 inch thick and features wide angle alarm bars that indicate alerts from all angles. On activation, the unit will automatically test audible and visual alarms, sensors, battery, and circuitry. The typical batter life is up to 10 hours with a 4 hour recharge time frame. As a testament to its commitment to safety and excellence, BW Technologies by Honeywell also offers a standard 2 year warranty that covers the sensors in addition to the unit.

Part Number: MC200H0BNA

SR-M-MC Replacement MICROceL Carbon Monoxide (CO) Sensor

• GasAlertMicroClip
• GasAlertMicroClip XT
• GasAlertMicroClip XL
• GasAlertMax XT
• GasAlertMax XT II

• Rugged, ultra-compact (4.2 x 2.4 x 1.4 in / 10.7 x 6.0 x 3.6 cm) and lightweight (5.6 oz. / 160 g)
• Simple one-button operation
• Standard datalogger (16 hours) and eventlogger (10 events)
• Durable, stainless steel alligator clip
• Integral concussion-proof boot for the most rugged environments
• Continuous LCD shows simultaneous gas concentrations for H2S,CO, O2, and combustibles (0-100% LEL or 0-5.0% Methane)
• Powered by a lithium polymer battery (run-time typically 14 hours;recharge in less than 3 hours)
• Provides 95 dB alarm tone and bright wide-angled alarm bars
• Equipped with internal vibrating alarm for high noise areas
• Backlight: in alarm (auto) and on demand reactivation
• Four alarm levels: Instant Low and High Alarm for all gases;TWA (time weighted average) and STEL (short term exposure limit) for H2S, CO; OL (over limit alarm)
• Simple automatic calibration procedure
• Fully compatible with BW's MicroDock II automatic test and calibration system
• Records TWA, STEL and maximum exposures to gas and displays readings on command
• User selectable options include: confi dence beep, latching alarm, calibration due date, bump due date, "SAFE" display function, multi-language, span concentration values, combustible sensor measurement selection (0-100%LEL or 0-5.0% v/v methane) and stealth mode
• Full function self-test of: sensor, battery, circuitry and audible/visual/vibration alarms
• Delivered ready for use with sensors, lithium polymer battey, stainless steel alligator belt clip, calibration hose/cap and instructions

Part Number: SRWMCDUM

BW Technologies 12-24 VDC Direct-Wire Power Adaptor

BW Technologies produces a multitude of accessories and replacement parts to improve the functionality and lifespan of their devices. BW Technologies also recognizes that various worksites have differing needs with respects to many aspects of equipment usage. To meet those needs, BW Technologies offers a variety of power options for their equipment. The BW Technologies 12-24 VDC Direct-Wire Power Adaptor can charge a gas detector by connecting directly to a 12V or 24V power system. Simply plug and charge.

Part Number: GAPA3

DOCK2-2-1C1P-00-G MicroDock II Automatic Test and Calibration Station with GasAlertMicroClip XT Module (Charging) with Power Supply and 2 Inlets by BW Technologies

BW Technologies by Honeywell has a solid reputation for cost effective, safe, and reliable gas detection and calibration systems. Continuing this trend of excellence, BW Technologies has developed the MicroDock II automated instrument docking station. With multi-language support systems, self-containment, and easy portability, the low cost Microdock II is a great choice for automatic tests and calibrations.

Standard features

The MicroDock II is a hands-free automated calibration and testing system designed to monitor the functions and effectiveness of gas monitoring instruments developed by BW Technologies. The easy to use portable MicroDock II is fully expandable, and can accommodate up to 10 docking modules and 6 charging stations. Once connected, the dock automatically verifies the performance of audible and visual alarms and can calibrate gas detection and measurement. Results of calibration tests and performance measures are automatically recorded. The MicroDock II contains a MultiMediaCard data storage system to provide maximum datalogging and record retention.

Low maintenance

The MicroDock II is a fully functional stand alone automatic test and calibration system. Users do not need to be connected to a computer in order to perform calibration and bump tests. However, the system can be connected via an LAN, and the instrument includes BW Fleet Manager II software for quick and easy data analysis. The instruments long lasting batteries and wall adapter increase the lifespand of the instrument. With limited battery and part replacements, users can rest assured that their investment in the MicroDock II is sure to be sound.

Ease of use

The easy to read instrument display screen and bright LED test indicators ensure maximum readability of test results. The screen provides a real-time clock that displays the time and date of the last calibration and the last bump test, and the LED lights provide unmistakable pass or fail test results . The one button command keys is one of the design features that helps to minimize user training requirements and ensure that the instrument is intuitive and easy to function. Adding additional docking modules to the test station is also simple. Users need only to plug-in connections.

Compatibility

For power, the test system can run on a 6 volt wall adapter or a set of 4 C-cell batteries. The MicroDock II is compatible with a variety of BW Technologies gas monitoring systems including the GasAlertQuatro, GasAlertMax XT II, GasAlertMicroClip, GasAlertMicro 5 Series models, GasAlertClip Extreme (2 and 3 year), and GasAlert Extreme. Users may also purchase an optional wall mount for easy storage. Other optional accessories include the Cal gas wall mount, the MicroDock II portable system kit, demand flow regulator, and network USB. BW Technologies by Honeywell provides a standard 2 year warranty for the MicroDock II.

Worksite managers looking for a high quality, reliable, and low cost automated calibration and test system should look no further than the MicroDock II by BW Technologies. With its simple design, intuitive test result display, and easy to use calibration system, the MicroDock II is the best choice for calibration and testing.

Part Number: DOCK221C1P00G

DOCK2-0-1P-00-G GasAlertMicroClip XT Docking Module (Charging - No Power Supply) by BW Technologies

As a compatible accessory for the GasAlertMicroClip XT, BW Technologies manufactures the GasAlertMicroClip XT Docking Module. This compact desktop module is an easy and cost effective solution for bump tests and calibration. Simply drop the MicroClip into the docking station and monitor the LED lights for progress. The Docking Module is also capable of charging the GasAlertMicroClip XT. This particular product does not include a power supply.

Part Number: DOCK201P00G

MC2-X000-Y-NA GasAlertMicroClip Extreme Detector Oxygen (O2) - Yellow Housing by BW Technologies

When purchasing a gas and atmospheric detection device, buyers should evaluate their needs to determine the most appropriate device on the market. At BW Technologies by Honeywell, safety and reliability are top priorities. After years of research and development in gas and hazardous atmosphere detection, BW Technologies has introduced the GasAlertMicroClip XT into the gas monitoring market. Its sleek design and affordable price point place this gas detection system at the top of the market.

When looking for a safe, affordable, and reliable gas monitoring system, look no further than the GasAlertMicroClip XT. The compact and portable design offers the most affordable protection in gas monitoring systems. Using the latest technology, and intuitive user friendly features, users are able to work confidently with knowledge that the GasAlertMicroClip XT will appropriately alert them to possible gas hazards.

Simple design and portability

At approximately 6 ounces, BW Technologies by Honeywell has introduced a safe, reliable, and highly portable gas detection unit. The slender and compact design is met with a bright yellow casing to help ensure that the device is not left behind on the worksite. The casing also helps to make the device water resistant and includes a built in concussion proof boot. In line with its simple design, the GasAlertMicroClip XT features a one button design that is both tamper-proof and intuitive.

Standard features

The exclusive IntelliFlash feature alerts users and those nearby that the GasAlertMicroClip XT is operating and functional. The LCD screen also consistently displays real time gas concentration levels. Like many products developed by BW Technologies, the MicroClip features a standard triple alarm system designed to alert users visually, audibly, and with vibrations. This multifaceted alarm system ensures that users and those nearby are well alerted of possible dangers regardless of visual or hearing impairments, including loud worksites.

Optional features and accessories

The GasAlertMicroClip XT also allows for users to customize certain features. Features such as alarm settings, display settings, test and calibration settings, start-up options, sensors, overrides, and measurements can be manually altered by the user. The MicroClip is compatible with the MicroDock II automatic test and calibration system. Additional accessories can be purchased including auxiliary filter kits, IR connectivity kits, and five unit cradle charges. By allowing users to customize various features and options, BW Technologies is ensuring that its gas detectors will continue to provide value to its buyers for many years.

Specifications

The GasAlertMicroClip XT monitors H2S, CO, O2, and combustible gases at varying measurement ranges. The device is compact at 4.4 inches long by 2.4 inches wide and 1 inch thick and features wide angle alarm bars that indicate alerts from all angles. On activation, the unit will automatically test audible and visual alarms, sensors, battery, and circuitry. The typical batter life is up to 10 hours with a 4 hour recharge time frame. As a testament to its commitment to safety and excellence, BW Technologies by Honeywell also offers a standard 2 year warranty that covers the sensors in addition to the unit.

Part Number: MC2X000YNA

Part Number: GAPA1MC5NA