MSA

10154079 Altair 2X Single Gas Detector, NH3 (25, 50), Charcoal by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

10154072 Altair 2XT Two-Tox Gas Detector, CO/H2S-LC (CO: 25, 100; H2S: 5, 10), Charcoal by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

10128625 Galaxy GX2 Automated Test System, Altair 5/Altair 5X, Charger, 4 Valve, North American Version by MSA

MSA is committed to providing the very best in sensor cell technology. From instrument design and manufacturing to datalogging and report generating software, MSA has consistently delivered products designed to optimize workplace safety and take an active approach to advancing jobsite performance. With the new Galaxy GX2 Automated Test System, MSA takes safety and technology to a whole new level.

Advanced MSA Link Pro Software

The MSA Link Pro Software is a state of the art datalogging system that allows users to analyze all data at any time. The software is easy to set up and configure to user specifications. The dashboard will provide alerts on all conditions, gas calibrations, and maintenance information (including expiration warnings). With the software, users can research data, generate reports, and send automatic email exposure alerts. Users can even generate live results or schedule emails for detector activities. Essentially, the datalogging capabilities allow worksite safety managers effectively and efficiently organize all data obtained throughout the entire gas detection fleet.

Simple User Friendly Design

The new Galaxy GX2 Automated Test System was designed with ease of use and simplicity in mind. The test system features an intuitive color touch screen for easy setup and viewing. The touch buttons are large and feature a scrolling screen with pop up test results. Simply place any compatible Galaxy gas detector onto the automated test system and the system will automatically test, calibrate, and charge. The system allows up to 10 devices and 4 cylinder holders. When using RFID-tagged gas cylinders, gas cylinder information is automatically entered into the system, and the onscreen gas cylinder pressure gauge can display multiple cylinder statuses at the same time.

Users can also see the testing and battery status of devices quickly through the colored LED indicators. With the simple time efficient automatic testing, the Galaxy GX2 Automated Test System can save users up to 50% of calibration costs.

Automated Test System Features

The Galaxy GX2 Automated Test System features 18 different languages with easy language setup options. The system is also optimized for use with MSA s high performing X-Cell Sensors. The advanced MSA X-Cell Sensor technology has a long life, quick bump test, fast calibration, and less clear times.

Galaxy GX2 Automated Test System Specifications

The Galaxy GX2 Automated Test System comes standard with pre-configured plugs, barbs, fresh air filters, spare parts kit, power supply and plug, Ethernet cable, and screen protector. MSA also offers nearly two dozen optional accessories that can be used to customize the automatic test system to meet individual workplace needs.

The automatic test system operates on 100-200 VAC (47-63 Hz). The entire unit is approximately 12 inches high and 6.5 inches wide.

The new Galaxy GX2 Automated Test System provides a simple and efficient approach to testing, calibration, and charging. With numerous user features, advanced software, optional accessories, and automatic cost reduction, the automated test system is an automatic choice for workplace safety managers.

Altair 2X Gas Detector by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

10092522 Altair Single-Gas Detector - Carbon Monoxide (CO) by MSA

The MSA Altair Maintenance-Free Single-Gas Detector comes is available in variety of gas detection models including oxygen, carbon monoxide, and hydrogen sulfide. The unit is designed to notify users of gas monitoring with visual alarms of ultra-bright LED lights (which remain visibly noticeable when stored in pockets) and a screen display, distinct audible alarms of over 95 decibels, and vibrating alarms. The triple alarm system will ensure that users and those nearby are appropriately alerted to gas situations in the environment. Most notably, the alarm system is designed to alert users regardless of hearing or visual impairment.

Altair Maintenance-Free Single-Gas Detector features

Worksites interested in assessing alarm conditions and history will find the automatic internal record keeping of the device to be useful. Using MSA InfraRed communication technology, the Altair Maintenance-Free Single-Gas Detector automatically stores the last 25 alarm events. The InfraRed communication adapter allows users to adjust settings and assess alarm conditions.

Easy to use

The unit s ease of use is integral when working in potentially dangerous conditions. These low maintenance unit s are key features of the products advanced design. Long-life lithium batteries typically perform for two years or more, and are designed to outlast a two-minute alarm mode per day. This type of battery efficiency places the Altair Maintenance-Free Single-Gas Detector well above its closest competitors in longevity.

The unit allows for easy bump checks by pressing Gas Test. Once tested, the unit displays a checkmark on the screen for 24 hours. The detectors also offer built-in calibrations, as required for some worksites. For other gas response tests and bump checks, the Altair Maintenance-Free Single-Gas Detector is compatible with Altair Quick-Check Stations. These stations are another maintenance free way to ensure the quality and reliability of the industry s leading gas detection devices.

Durability

Exceeding industry standards is the norm for MSA, and those in dangerous work settings can rest assured that The Safety Company has provided the very best in gas detection technology.

10128686 Galaxy GX2 Automated Test System, Altair 5/Altair 5X, 4 Valve by MSA

MSA is committed to providing the very best in sensor cell technology. From instrument design and manufacturing to datalogging and report generating software, MSA has consistently delivered products designed to optimize workplace safety and take an active approach to advancing jobsite performance. With the new Galaxy GX2 Automated Test System, MSA takes safety and technology to a whole new level.

Advanced MSA Link Pro Software

The MSA Link Pro Software is a state of the art datalogging system that allows users to analyze all data at any time. The software is easy to set up and configure to user specifications. The dashboard will provide alerts on all conditions, gas calibrations, and maintenance information (including expiration warnings). With the software, users can research data, generate reports, and send automatic email exposure alerts. Users can even generate live results or schedule emails for detector activities. Essentially, the datalogging capabilities allow worksite safety managers effectively and efficiently organize all data obtained throughout the entire gas detection fleet.

Simple User Friendly Design

The new Galaxy GX2 Automated Test System was designed with ease of use and simplicity in mind. The test system features an intuitive color touch screen for easy setup and viewing. The touch buttons are large and feature a scrolling screen with pop up test results. Simply place any compatible Galaxy gas detector onto the automated test system and the system will automatically test, calibrate, and charge. The system allows up to 10 devices and 4 cylinder holders. When using RFID-tagged gas cylinders, gas cylinder information is automatically entered into the system, and the onscreen gas cylinder pressure gauge can display multiple cylinder statuses at the same time.

Users can also see the testing and battery status of devices quickly through the colored LED indicators. With the simple time efficient automatic testing, the Galaxy GX2 Automated Test System can save users up to 50% of calibration costs.

Automated Test System Features

The Galaxy GX2 Automated Test System features 18 different languages with easy language setup options. The system is also optimized for use with MSA s high performing X-Cell Sensors. The advanced MSA X-Cell Sensor technology has a long life, quick bump test, fast calibration, and less clear times.

Galaxy GX2 Automated Test System Specifications

The Galaxy GX2 Automated Test System comes standard with pre-configured plugs, barbs, fresh air filters, spare parts kit, power supply and plug, Ethernet cable, and screen protector. MSA also offers nearly two dozen optional accessories that can be used to customize the automatic test system to meet individual workplace needs.

The automatic test system operates on 100-200 VAC (47-63 Hz). The entire unit is approximately 12 inches high and 6.5 inches wide.

The new Galaxy GX2 Automated Test System provides a simple and efficient approach to testing, calibration, and charging. With numerous user features, advanced software, optional accessories, and automatic cost reduction, the automated test system is an automatic choice for workplace safety managers.