Jenco

3010M Handheld Cond/TDS/Sal/Temp Meter with Memories by Jenco

• Simultaneous displays of conductivity, salinity or TDS with temperature measurements.
• 50 data set reviewable memory.
• Convenient one point calibration. Calibration data is stored in memory and ready for use on power up.
• Selectable cell constants for true wide range readings.
• Adjustable TDS coefficient, reference temperature and temperature coefficient.
• Uses one conductivity cell for conductivity, salinity and TDS measurements.
• Accepts 2-wire conductivity cells with K=0.1, 1.0 and 10.0 cell constants for improved flexibility and accuracy.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof.
• Low battery indicator.
• RoHS and CE compliant.

768KF-02 Panel Mount Digital Thermometer with Analog Voltage Output, Type K, Range -2 to 752 °F by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.5% of span ± 1 digit, features a bright red LED display and 1/8 DIN plastic housing. Available in types. J or K with 4 available temperature ranges per type, specify degrees °C or °F. Ambient range 0 to 40°C. 115/230V AC operation.

9010M Handheld DO/Temp Meter with Memories by Jenco

• Simultaneous display of dissolved oxygen and temperature measurements.
• 50 data set reviewable memory.
• Automatic temperature compensated (ATC) dissolved oxygen readings.
• User selectable salinity and pressure compensated dissolved oxygen readings.
• Works with accurate and reliable polarographic (9010M) or galvanic (9020M) dissolved oxygen probes.
• Automatic shutoff function (45 minutes of non-use).
• Battery life over 500 hours.
• IP65 waterproof housing.
• Low battery indicator.
• RoHS and CE compliant

EC330 VisionPlus Conductivity Meter by Jenco

Jenco EC330 is an easy to use, IP67 rated conductivity tester with TDS and temperature readout. Key features include dual display of conductivity or TDS with temperature, selectable or auto ranging, replaceable conductivity cell and IP67 rated body.

This tester is RoHS compliant.

• Simultaneous display of conductivity and temperature, or TDS and temperature
• 1 or 2 point calibration
• Automatic temperature compensation
• Selectable or auto ranging of conductivity and TDS readings
• Replaceable conductivity cell
• 6 selectable units of measure (uS/cm, mS/cm, mg/L, g/L, °C, °F)
• Data hold

392-SBC Conductivity Transmitter, K=1, uS/mS Mid/Hi Range by Jenco

Conductivity Transmitter, panel mount, 1/8 DIN aluminum case, K=1.0 cell constant, isolated 4-20 mA output for 0 to 5.0 mS range, 0 mA = 0 mS, 20 mA = 5.0 mS. Isolated 4- 30 mA transmitter output for 0 to 15.0 mS range, 0 mA = 0 mS, each 5/16 mS thereafter equals 1.0 mA additionally. ATC is 10K thermistor, 5 to 55°. Connections are to terminal blocks via spade lug connectors. 115/230V AC powered.

• Measurement range 0 to 5.0 ms/cm / 0 to 15.0 ms/cm
• Isolated 4-20ma output
• Automatic temperature compensation
• K= 1.0 cell constant
• Display in ms/cm
• High 50/60 hz noise rejection
• 1/8 DIN package

3251MK Handheld Conductivity Meter with Memory Kit by Jenco

Includes:

• 3251M Handheld Conductivity Meter with Memory
• K=1 Cond. Probe
• 6230D115 AC Adapter
• 3250F Carrying Case

3251NK Cond/Sal/Temp Meter without RS-232 Computer Interface Kit by Jenco

Includes:

• 3251M Handheld Conductivity Meter with Memory
• 106 K=1 Cond. Probe
• 6230D115 AC Adapter
• 3250F Carrying Case