Name: Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV 316 Stainless Steel Encl. with (2) M25 entries, INMETRO - FS20X-211-24-4
SKU: fs20x-211-24-4
Price: 5,226.00 USD

Filter Results

Category reset

Price Range

Items per page: Sort by:

QUICK VIEW

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum…

| Item #: FS20X-211-21-2

$3,824.00

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) 3/4 in. NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III - FS20X-211-21-2

View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) 3/4 in. NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III - FS20X-211-21-2

Item #	FS20X-211-21-2
Brand

Price: $3,824.00

Quantity:

FS20X-211-21-2 FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) 3/4 in. NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS fire and flame detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.

Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminations. All UV sensors will be attenuated to some degree. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal processing calculations whilst the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing event log and FirePic™ data. The FS20X detector has a detection range in excess of 60 m (200 feet) (very high sensitivity setting) for the detection of a 0.1m² (one square-foot) Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers' detectors.

The FS20 detector using advanced patented algorithms for signal processing and fire and flame analysis is designed to alarm to all types of fires in all industrial environmental conditions. If the detector's UV signal is degraded due to heavy smoke or a contaminated lens, the FS20X's patented WideBand IR™, Near Band IR and Visible sensors will still alarm to fire, albeit at a reduced sensitivity and slower response time.

FEATURES

Patented WideBand IR™ Infrared combined with Ultraviolet
Detection range greater than 60 m (200 feet) to 0.1 m² (1 sq. ft.) heptane fire
Patented Electronic Frequency Analysis
Visible sensor for optimum false alarm rejection
Selectable detection sensitivities
Solar blind 90° cone-of-vision
Dual microprocessors for reliable performance
Real-time clock for accurate time dating of events
FirePic™ - Up to 6 pre-fire event data storage
Event log - Up to 200 events with date and time stamp
Built-in RS-485 ModBus communication
Built-in non-isolated 4-20 mA analog output (sink or source)
Alarm, Fault and Fire Verification relays
Automatic Optical Path and Electronic self-test
Patented Electronics Module for component protection with plug-in terminations for easy field installation
Two 25 mm conduit entries or two 3/4" NPT
Low power consumption
High RFI and EMI immunity
FM hazardous area approved
Ex d ATEX approved
CU-TR approved
INMETRO approved
Meets SIL 2 requirements
Certified to EN54-10:2002 (option)
FM 3260 performance

BENEFITS

Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
Wide operating temperature range
Arc welding immunity
False alarm rejection
Minimal maintenance for trouble-free operation
PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
Suitable for a wide variety of applications

APPLICATIONS

Refineries and oil production facilities
Off-Shore platforms
Turbine/Compressor enclosures
Acetylene processing and storage
Oil and Gas pipelines and pumping stations
LNG/LPG loading and unloading facilities
Natural Gas and CNG plants
Ethanol, Methanol, and IPA production and storage
Crude oil and gasoline storage and tank farms
Aircraft hangars
Hydrogen plants and storage
Paint and solvent storage
Chemical production, storage, and loading facilities
Power plants
Silane gas storage

QUICK VIEW

Honeywell Analytics IR Test Lamp for Testing FSX Detectors, Explosion Proof version. Includes…

| Item #: TL-2055

Honeywell Analytics IR Test Lamp for Testing FSX Detectors, Explosion Proof version. Includes Universal Charger - TL-2055

Item #	TL-2055
Brand

Price: $4,001.00

Quantity:

IR Test Lamp for Testing FSX Detectors, Explosion Proof version. Includes Universal Charger

QUICK VIEW

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum…

| Item #: FS20X-211-23-3

$4,456.00

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 - FS20X-211-23-3

View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 - FS20X-211-23-3

Item #	FS20X-211-23-3
Brand

Price: $4,456.00

Quantity:

FS20X-211-23-3 FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

FEATURES

Patented WideBand IR™ Infrared combined with Ultraviolet
Detection range greater than 60 m (200 feet) to 0.1 m² (1 sq. ft.) heptane fire
Patented Electronic Frequency Analysis
Visible sensor for optimum false alarm rejection
Selectable detection sensitivities
Solar blind 90° cone-of-vision
Dual microprocessors for reliable performance
Real-time clock for accurate time dating of events
FirePic™ - Up to 6 pre-fire event data storage
Event log - Up to 200 events with date and time stamp
Built-in RS-485 ModBus communication
Built-in non-isolated 4-20 mA analog output (sink or source)
Alarm, Fault and Fire Verification relays
Automatic Optical Path and Electronic self-test
Patented Electronics Module for component protection with plug-in terminations for easy field installation
Two 25 mm conduit entries or two 3/4" NPT
Low power consumption
High RFI and EMI immunity
FM hazardous area approved
Ex d ATEX approved
CU-TR approved
INMETRO approved
Meets SIL 2 requirements
Certified to EN54-10:2002 (option)
FM 3260 performance

BENEFITS

Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
Wide operating temperature range
Arc welding immunity
False alarm rejection
Minimal maintenance for trouble-free operation
PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
Suitable for a wide variety of applications

APPLICATIONS

Refineries and oil production facilities
Off-Shore platforms
Turbine/Compressor enclosures
Acetylene processing and storage
Oil and Gas pipelines and pumping stations
LNG/LPG loading and unloading facilities
Natural Gas and CNG plants
Ethanol, Methanol, and IPA production and storage
Crude oil and gasoline storage and tank farms
Aircraft hangars
Hydrogen plants and storage
Paint and solvent storage
Chemical production, storage, and loading facilities
Power plants
Silane gas storage

QUICK VIEW

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV 316 Stainless Steel…

| Item #: FS20X-212-24-3

$5,769.00

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV 316 Stainless Steel Encl. with (2) M25 entries, ATEX/IECEx, HART module factory installed - FS20X-212-24-3

View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV 316 Stainless Steel Encl. with (2) M25 entries, ATEX/IECEx, HART module factory installed - FS20X-212-24-3

Item #	FS20X-212-24-3
Brand

Price: $5,769.00

Quantity:

FS20X-212-24-3 FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV 316 Stainless Steel Encl. with (2) M25 entries, ATEX/IECEx, HART module factory installed by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

FEATURES

Patented WideBand IR™ Infrared combined with Ultraviolet
Detection range greater than 60 m (200 feet) to 0.1 m² (1 sq. ft.) heptane fire
Patented Electronic Frequency Analysis
Visible sensor for optimum false alarm rejection
Selectable detection sensitivities
Solar blind 90° cone-of-vision
Dual microprocessors for reliable performance
Real-time clock for accurate time dating of events
FirePic™ - Up to 6 pre-fire event data storage
Event log - Up to 200 events with date and time stamp
Built-in RS-485 ModBus communication
Built-in non-isolated 4-20 mA analog output (sink or source)
Alarm, Fault and Fire Verification relays
Automatic Optical Path and Electronic self-test
Patented Electronics Module for component protection with plug-in terminations for easy field installation
Two 25 mm conduit entries or two 3/4" NPT
Low power consumption
High RFI and EMI immunity
FM hazardous area approved
Ex d ATEX approved
CU-TR approved
INMETRO approved
Meets SIL 2 requirements
Certified to EN54-10:2002 (option)
FM 3260 performance

BENEFITS

Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
Wide operating temperature range
Arc welding immunity
False alarm rejection
Minimal maintenance for trouble-free operation
PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
Suitable for a wide variety of applications

APPLICATIONS

Refineries and oil production facilities
Off-Shore platforms
Turbine/Compressor enclosures
Acetylene processing and storage
Oil and Gas pipelines and pumping stations
LNG/LPG loading and unloading facilities
Natural Gas and CNG plants
Ethanol, Methanol, and IPA production and storage
Crude oil and gasoline storage and tank farms
Aircraft hangars
Hydrogen plants and storage
Paint and solvent storage
Chemical production, storage, and loading facilities
Power plants
Silane gas storage

QUICK VIEW

Honeywell Analytics Battery Pack for Model FT-2145/TL-1055/Tl-2055 Test Lamps, 12VDC, 2200mA, NiMH -…

| Item #: PW-3123-0005

$197.00

View Product Details >

Honeywell Analytics Battery Pack for Model FT-2145/TL-1055/Tl-2055 Test Lamps, 12VDC, 2200mA, NiMH - PW-3123-0005

Item #	PW-3123-0005
Brand

Price: $197.00

Quantity:

Battery Pack for Model FT-2145/TL-1055/Tl-2055 Test Lamps, 12VDC, 2200mA, NiMH

QUICK VIEW

Honeywell Analytics Universal Charger for Fire Sentry Test Lamps and Interface Kits for 110-240 VAC…

| Item #: PSU-12

$232.00

View Product Details >

Honeywell Analytics Universal Charger for Fire Sentry Test Lamps and Interface Kits for 110-240 VAC with International Plugs - PSU-12

Item #	PSU-12
Brand

Price: $232.00

Quantity:

Universal Charger for Fire Sentry Test Lamps and Interface Kits for 110-240 VAC with International Plugs

QUICK VIEW

Honeywell Analytics Field of View Restrictor - FVR-01

| Item #: FVR-01

$176.00

View Product Details >

Honeywell Analytics Field of View Restrictor - FVR-01

Item #	FVR-01
Brand

Price: $176.00

Quantity:

Field of View Restrictor

QUICK VIEW

Honeywell Analytics Stainless Steel Swivel Mounting Assembly for FS24X, FS20X, SS4, SS2 detectors -…

| Item #: SM4

$307.00

View Product Details >

Honeywell Analytics Stainless Steel Swivel Mounting Assembly for FS24X, FS20X, SS4, SS2 detectors - SM4

Item #	SM4
Brand

Price: $307.00

Quantity:

Stainless Steel Swivel Mounting Assembly for FS24X, FS20X, SS4, SS2 detectors

QUICK VIEW

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV SS NPT FM/EN54 - FS20X-211…

| Item #: FS20X-211-22-6

$5,233.00

View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV SS NPT FM/EN54 - FS20X-211-22-6

Item #	FS20X-211-22-6
Brand

Price: $5,233.00

Quantity:

FS20X-211-22-6 FS20X Multi-Spectrum Fire and Flame Detector, IR/UV SS NPT FM/EN54 by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

FEATURES

Patented WideBand IR™ Infrared combined with Ultraviolet
Detection range greater than 60 m (200 feet) to 0.1 m² (1 sq. ft.) heptane fire
Patented Electronic Frequency Analysis
Visible sensor for optimum false alarm rejection
Selectable detection sensitivities
Solar blind 90° cone-of-vision
Dual microprocessors for reliable performance
Real-time clock for accurate time dating of events
FirePic™ - Up to 6 pre-fire event data storage
Event log - Up to 200 events with date and time stamp
Built-in RS-485 ModBus communication
Built-in non-isolated 4-20 mA analog output (sink or source)
Alarm, Fault and Fire Verification relays
Automatic Optical Path and Electronic self-test
Patented Electronics Module for component protection with plug-in terminations for easy field installation
Two 25 mm conduit entries or two 3/4" NPT
Low power consumption
High RFI and EMI immunity
FM hazardous area approved
Ex d ATEX approved
CU-TR approved
INMETRO approved
Meets SIL 2 requirements
Certified to EN54-10:2002 (option)
FM 3260 performance

BENEFITS

Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
Wide operating temperature range
Arc welding immunity
False alarm rejection
Minimal maintenance for trouble-free operation
PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
Suitable for a wide variety of applications

APPLICATIONS

Refineries and oil production facilities
Off-Shore platforms
Turbine/Compressor enclosures
Acetylene processing and storage
Oil and Gas pipelines and pumping stations
LNG/LPG loading and unloading facilities
Natural Gas and CNG plants
Ethanol, Methanol, and IPA production and storage
Crude oil and gasoline storage and tank farms
Aircraft hangars
Hydrogen plants and storage
Paint and solvent storage
Chemical production, storage, and loading facilities
Power plants
Silane gas storage

QUICK VIEW

Honeywell Analytics Optional HART Module for FS20X Detectors - FSX-A014

| Item #: FSX-A014

$678.00

View Product Details >

Honeywell Analytics Optional HART Module for FS20X Detectors - FSX-A014

Item #	FSX-A014
Brand

Price: $678.00

Quantity:

Optional HART Module for FS20X Detectors

QUICK VIEW

Honeywell Analytics IR Test Lamp for Testing FSX Detectors, Non-explosion Proof version. Includes…

| Item #: TL-1055

$2,055.00

View Product Details >

Honeywell Analytics IR Test Lamp for Testing FSX Detectors, Non-explosion Proof version. Includes Universal Charger - TL-1055

Item #	TL-1055
Brand

Price: $2,055.00

Quantity:

IR Test Lamp for Testing FSX Detectors, Non-explosion Proof version. Includes Universal Charger

QUICK VIEW

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV Copper-free Aluminum…

| Item #: FS20X-212-21-2

$4,502.00

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV Copper-free Aluminum Encl. with (2) 3/4 in. entries, FM/cFM, HART module factory installed - FS20X-212-21-2

View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV Copper-free Aluminum Encl. with (2) 3/4 in. entries, FM/cFM, HART module factory installed - FS20X-212-21-2

Item #	FS20X-212-21-2
Brand

Price: $4,502.00

Quantity:

FS20X-212-21-2 FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV Copper-free Aluminum Encl. with (2) 3/4 in. entries, FM/cFM, HART module factory installed by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

FEATURES

Patented WideBand IR™ Infrared combined with Ultraviolet
Detection range greater than 60 m (200 feet) to 0.1 m² (1 sq. ft.) heptane fire
Patented Electronic Frequency Analysis
Visible sensor for optimum false alarm rejection
Selectable detection sensitivities
Solar blind 90° cone-of-vision
Dual microprocessors for reliable performance
Real-time clock for accurate time dating of events
FirePic™ - Up to 6 pre-fire event data storage
Event log - Up to 200 events with date and time stamp
Built-in RS-485 ModBus communication
Built-in non-isolated 4-20 mA analog output (sink or source)
Alarm, Fault and Fire Verification relays
Automatic Optical Path and Electronic self-test
Patented Electronics Module for component protection with plug-in terminations for easy field installation
Two 25 mm conduit entries or two 3/4" NPT
Low power consumption
High RFI and EMI immunity
FM hazardous area approved
Ex d ATEX approved
CU-TR approved
INMETRO approved
Meets SIL 2 requirements
Certified to EN54-10:2002 (option)
FM 3260 performance

BENEFITS

Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
Wide operating temperature range
Arc welding immunity
False alarm rejection
Minimal maintenance for trouble-free operation
PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
Suitable for a wide variety of applications

APPLICATIONS

Refineries and oil production facilities
Off-Shore platforms
Turbine/Compressor enclosures
Acetylene processing and storage
Oil and Gas pipelines and pumping stations
LNG/LPG loading and unloading facilities
Natural Gas and CNG plants
Ethanol, Methanol, and IPA production and storage
Crude oil and gasoline storage and tank farms
Aircraft hangars
Hydrogen plants and storage
Paint and solvent storage
Chemical production, storage, and loading facilities
Power plants
Silane gas storage

QUICK VIEW

Honeywell Analytics Sunshield for SS2, SS4 & FS24X Detectors, 316 Stainless Steel - SH-001

| Item #: SH-001

$234.00

View Product Details >

Honeywell Analytics Sunshield for SS2, SS4 & FS24X Detectors, 316 Stainless Steel - SH-001

Item #	SH-001
Brand

Price: $234.00

Quantity:

Sunshield for SS2, SS4 & FS24X Detectors, 316 Stainless Steel

QUICK VIEW

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Stainless Steel Encl.…

| Item #: FS20X-211-22-2

$5,113.00

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Stainless Steel Encl. with (2) 3/4 in. NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III - FS20X-211-22-2

View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Stainless Steel Encl. with (2) 3/4 in. NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III - FS20X-211-22-2

Item #	FS20X-211-22-2
Brand

Price: $5,113.00

Quantity:

FS20X-211-22-2 FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Stainless Steel Encl. with (2) 3/4 in. NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

FEATURES

Patented WideBand IR™ Infrared combined with Ultraviolet
Detection range greater than 60 m (200 feet) to 0.1 m² (1 sq. ft.) heptane fire
Patented Electronic Frequency Analysis
Visible sensor for optimum false alarm rejection
Selectable detection sensitivities
Solar blind 90° cone-of-vision
Dual microprocessors for reliable performance
Real-time clock for accurate time dating of events
FirePic™ - Up to 6 pre-fire event data storage
Event log - Up to 200 events with date and time stamp
Built-in RS-485 ModBus communication
Built-in non-isolated 4-20 mA analog output (sink or source)
Alarm, Fault and Fire Verification relays
Automatic Optical Path and Electronic self-test
Patented Electronics Module for component protection with plug-in terminations for easy field installation
Two 25 mm conduit entries or two 3/4" NPT
Low power consumption
High RFI and EMI immunity
FM hazardous area approved
Ex d ATEX approved
CU-TR approved
INMETRO approved
Meets SIL 2 requirements
Certified to EN54-10:2002 (option)
FM 3260 performance

BENEFITS

Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
Wide operating temperature range
Arc welding immunity
False alarm rejection
Minimal maintenance for trouble-free operation
PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
Suitable for a wide variety of applications

APPLICATIONS

Refineries and oil production facilities
Off-Shore platforms
Turbine/Compressor enclosures
Acetylene processing and storage
Oil and Gas pipelines and pumping stations
LNG/LPG loading and unloading facilities
Natural Gas and CNG plants
Ethanol, Methanol, and IPA production and storage
Crude oil and gasoline storage and tank farms
Aircraft hangars
Hydrogen plants and storage
Paint and solvent storage
Chemical production, storage, and loading facilities
Power plants
Silane gas storage

QUICK VIEW

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Stainless Steel Encl.…

| Item #: FS20X-211-24-3

$5,221.00

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Stainless Steel Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 - FS20X-211-24-3

View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Stainless Steel Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 - FS20X-211-24-3

Item #	FS20X-211-24-3
Brand

Price: $5,221.00

Quantity:

FS20X-211-24-3 FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Stainless Steel Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

FEATURES

Patented WideBand IR™ Infrared combined with Ultraviolet
Detection range greater than 60 m (200 feet) to 0.1 m² (1 sq. ft.) heptane fire
Patented Electronic Frequency Analysis
Visible sensor for optimum false alarm rejection
Selectable detection sensitivities
Solar blind 90° cone-of-vision
Dual microprocessors for reliable performance
Real-time clock for accurate time dating of events
FirePic™ - Up to 6 pre-fire event data storage
Event log - Up to 200 events with date and time stamp
Built-in RS-485 ModBus communication
Built-in non-isolated 4-20 mA analog output (sink or source)
Alarm, Fault and Fire Verification relays
Automatic Optical Path and Electronic self-test
Patented Electronics Module for component protection with plug-in terminations for easy field installation
Two 25 mm conduit entries or two 3/4" NPT
Low power consumption
High RFI and EMI immunity
FM hazardous area approved
Ex d ATEX approved
CU-TR approved
INMETRO approved
Meets SIL 2 requirements
Certified to EN54-10:2002 (option)
FM 3260 performance

BENEFITS

Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
Wide operating temperature range
Arc welding immunity
False alarm rejection
Minimal maintenance for trouble-free operation
PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
Suitable for a wide variety of applications

APPLICATIONS

Refineries and oil production facilities
Off-Shore platforms
Turbine/Compressor enclosures
Acetylene processing and storage
Oil and Gas pipelines and pumping stations
LNG/LPG loading and unloading facilities
Natural Gas and CNG plants
Ethanol, Methanol, and IPA production and storage
Crude oil and gasoline storage and tank farms
Aircraft hangars
Hydrogen plants and storage
Paint and solvent storage
Chemical production, storage, and loading facilities
Power plants
Silane gas storage

QUICK VIEW

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV AL M25 FM/EN54 - FS20X-211…

| Item #: FS20X-211-23-6

$4,766.00

View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV AL M25 FM/EN54 - FS20X-211-23-6

Item #	FS20X-211-23-6
Brand

Price: $4,766.00

Quantity:

FS20X-211-23-6 FS20X Multi-Spectrum Fire and Flame Detector, IR/UV AL M25 FM/EN54 by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

FEATURES

Patented WideBand IR™ Infrared combined with Ultraviolet
Detection range greater than 60 m (200 feet) to 0.1 m² (1 sq. ft.) heptane fire
Patented Electronic Frequency Analysis
Visible sensor for optimum false alarm rejection
Selectable detection sensitivities
Solar blind 90° cone-of-vision
Dual microprocessors for reliable performance
Real-time clock for accurate time dating of events
FirePic™ - Up to 6 pre-fire event data storage
Event log - Up to 200 events with date and time stamp
Built-in RS-485 ModBus communication
Built-in non-isolated 4-20 mA analog output (sink or source)
Alarm, Fault and Fire Verification relays
Automatic Optical Path and Electronic self-test
Patented Electronics Module for component protection with plug-in terminations for easy field installation
Two 25 mm conduit entries or two 3/4" NPT
Low power consumption
High RFI and EMI immunity
FM hazardous area approved
Ex d ATEX approved
CU-TR approved
INMETRO approved
Meets SIL 2 requirements
Certified to EN54-10:2002 (option)
FM 3260 performance

BENEFITS

Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
Wide operating temperature range
Arc welding immunity
False alarm rejection
Minimal maintenance for trouble-free operation
PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
Suitable for a wide variety of applications

APPLICATIONS

Refineries and oil production facilities
Off-Shore platforms
Turbine/Compressor enclosures
Acetylene processing and storage
Oil and Gas pipelines and pumping stations
LNG/LPG loading and unloading facilities
Natural Gas and CNG plants
Ethanol, Methanol, and IPA production and storage
Crude oil and gasoline storage and tank farms
Aircraft hangars
Hydrogen plants and storage
Paint and solvent storage
Chemical production, storage, and loading facilities
Power plants
Silane gas storage

QUICK VIEW

Honeywell Analytics FS20X Replacement Detector Module - FS20X-211-10

| Item #: FS20X-211-10

$3,892.00

View Product Details >

Honeywell Analytics FS20X Replacement Detector Module - FS20X-211-10

Item #	FS20X-211-10
Brand

Price: $3,892.00

Quantity:

FS20X Replacement Detector Module

QUICK VIEW

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR STmp, EN54 - FS20X-211-10-6

| Item #: FS20X-211-10-6

$4,183.00

View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR STmp, EN54 - FS20X-211-10-6

Item #	FS20X-211-10-6
Brand

Price: $4,183.00

Quantity:

FS20X-211-10-6 FS20X Multi-Spectrum Fire and Flame Detector, UV/IR STmp, EN54 by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

FEATURES

Patented WideBand IR™ Infrared combined with Ultraviolet
Detection range greater than 60 m (200 feet) to 0.1 m² (1 sq. ft.) heptane fire
Patented Electronic Frequency Analysis
Visible sensor for optimum false alarm rejection
Selectable detection sensitivities
Solar blind 90° cone-of-vision
Dual microprocessors for reliable performance
Real-time clock for accurate time dating of events
FirePic™ - Up to 6 pre-fire event data storage
Event log - Up to 200 events with date and time stamp
Built-in RS-485 ModBus communication
Built-in non-isolated 4-20 mA analog output (sink or source)
Alarm, Fault and Fire Verification relays
Automatic Optical Path and Electronic self-test
Patented Electronics Module for component protection with plug-in terminations for easy field installation
Two 25 mm conduit entries or two 3/4" NPT
Low power consumption
High RFI and EMI immunity
FM hazardous area approved
Ex d ATEX approved
CU-TR approved
INMETRO approved
Meets SIL 2 requirements
Certified to EN54-10:2002 (option)
FM 3260 performance

BENEFITS

Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
Wide operating temperature range
Arc welding immunity
False alarm rejection
Minimal maintenance for trouble-free operation
PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
Suitable for a wide variety of applications

APPLICATIONS

Refineries and oil production facilities
Off-Shore platforms
Turbine/Compressor enclosures
Acetylene processing and storage
Oil and Gas pipelines and pumping stations
LNG/LPG loading and unloading facilities
Natural Gas and CNG plants
Ethanol, Methanol, and IPA production and storage
Crude oil and gasoline storage and tank farms
Aircraft hangars
Hydrogen plants and storage
Paint and solvent storage
Chemical production, storage, and loading facilities
Power plants
Silane gas storage

QUICK VIEW

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL NPT INMETRO - FS20X-211…

| Item #: FS20X-211-21-4

$4,374.00

View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL NPT INMETRO - FS20X-211-21-4

Item #	FS20X-211-21-4
Brand

Price: $4,374.00

Quantity:

FS20X-211-21-4 FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL NPT INMETRO by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

FEATURES

Patented WideBand IR™ Infrared combined with Ultraviolet
Detection range greater than 60 m (200 feet) to 0.1 m² (1 sq. ft.) heptane fire
Patented Electronic Frequency Analysis
Visible sensor for optimum false alarm rejection
Selectable detection sensitivities
Solar blind 90° cone-of-vision
Dual microprocessors for reliable performance
Real-time clock for accurate time dating of events
FirePic™ - Up to 6 pre-fire event data storage
Event log - Up to 200 events with date and time stamp
Built-in RS-485 ModBus communication
Built-in non-isolated 4-20 mA analog output (sink or source)
Alarm, Fault and Fire Verification relays
Automatic Optical Path and Electronic self-test
Patented Electronics Module for component protection with plug-in terminations for easy field installation
Two 25 mm conduit entries or two 3/4" NPT
Low power consumption
High RFI and EMI immunity
FM hazardous area approved
Ex d ATEX approved
CU-TR approved
INMETRO approved
Meets SIL 2 requirements
Certified to EN54-10:2002 (option)
FM 3260 performance

BENEFITS

Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
Wide operating temperature range
Arc welding immunity
False alarm rejection
Minimal maintenance for trouble-free operation
PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
Suitable for a wide variety of applications

APPLICATIONS

Refineries and oil production facilities
Off-Shore platforms
Turbine/Compressor enclosures
Acetylene processing and storage
Oil and Gas pipelines and pumping stations
LNG/LPG loading and unloading facilities
Natural Gas and CNG plants
Ethanol, Methanol, and IPA production and storage
Crude oil and gasoline storage and tank farms
Aircraft hangars
Hydrogen plants and storage
Paint and solvent storage
Chemical production, storage, and loading facilities
Power plants
Silane gas storage

QUICK VIEW

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV AL NPT FM/EN54 - FS20X-211…

| Item #: FS20X-211-21-6

$4,870.00

View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV AL NPT FM/EN54 - FS20X-211-21-6

Item #	FS20X-211-21-6
Brand

Price: $4,870.00

Quantity:

FS20X-211-21-6 FS20X Multi-Spectrum Fire and Flame Detector, IR/UV AL NPT FM/EN54 by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

FEATURES

Patented WideBand IR™ Infrared combined with Ultraviolet
Detection range greater than 60 m (200 feet) to 0.1 m² (1 sq. ft.) heptane fire
Patented Electronic Frequency Analysis
Visible sensor for optimum false alarm rejection
Selectable detection sensitivities
Solar blind 90° cone-of-vision
Dual microprocessors for reliable performance
Real-time clock for accurate time dating of events
FirePic™ - Up to 6 pre-fire event data storage
Event log - Up to 200 events with date and time stamp
Built-in RS-485 ModBus communication
Built-in non-isolated 4-20 mA analog output (sink or source)
Alarm, Fault and Fire Verification relays
Automatic Optical Path and Electronic self-test
Patented Electronics Module for component protection with plug-in terminations for easy field installation
Two 25 mm conduit entries or two 3/4" NPT
Low power consumption
High RFI and EMI immunity
FM hazardous area approved
Ex d ATEX approved
CU-TR approved
INMETRO approved
Meets SIL 2 requirements
Certified to EN54-10:2002 (option)
FM 3260 performance

BENEFITS

Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
Wide operating temperature range
Arc welding immunity
False alarm rejection
Minimal maintenance for trouble-free operation
PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
Suitable for a wide variety of applications

APPLICATIONS

Refineries and oil production facilities
Off-Shore platforms
Turbine/Compressor enclosures
Acetylene processing and storage
Oil and Gas pipelines and pumping stations
LNG/LPG loading and unloading facilities
Natural Gas and CNG plants
Ethanol, Methanol, and IPA production and storage
Crude oil and gasoline storage and tank farms
Aircraft hangars
Hydrogen plants and storage
Paint and solvent storage
Chemical production, storage, and loading facilities
Power plants
Silane gas storage

QUICK VIEW

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS NPT INMETRO - FS20X-211…

| Item #: FS20X-211-22-4

$4,906.00

View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS NPT INMETRO - FS20X-211-22-4

Item #	FS20X-211-22-4
Brand

Price: $4,906.00

Quantity:

FS20X-211-22-4 FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS NPT INMETRO by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

FEATURES

Patented WideBand IR™ Infrared combined with Ultraviolet
Detection range greater than 60 m (200 feet) to 0.1 m² (1 sq. ft.) heptane fire
Patented Electronic Frequency Analysis
Visible sensor for optimum false alarm rejection
Selectable detection sensitivities
Solar blind 90° cone-of-vision
Dual microprocessors for reliable performance
Real-time clock for accurate time dating of events
FirePic™ - Up to 6 pre-fire event data storage
Event log - Up to 200 events with date and time stamp
Built-in RS-485 ModBus communication
Built-in non-isolated 4-20 mA analog output (sink or source)
Alarm, Fault and Fire Verification relays
Automatic Optical Path and Electronic self-test
Patented Electronics Module for component protection with plug-in terminations for easy field installation
Two 25 mm conduit entries or two 3/4" NPT
Low power consumption
High RFI and EMI immunity
FM hazardous area approved
Ex d ATEX approved
CU-TR approved
INMETRO approved
Meets SIL 2 requirements
Certified to EN54-10:2002 (option)
FM 3260 performance

BENEFITS

Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
Wide operating temperature range
Arc welding immunity
False alarm rejection
Minimal maintenance for trouble-free operation
PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
Suitable for a wide variety of applications

APPLICATIONS

Refineries and oil production facilities
Off-Shore platforms
Turbine/Compressor enclosures
Acetylene processing and storage
Oil and Gas pipelines and pumping stations
LNG/LPG loading and unloading facilities
Natural Gas and CNG plants
Ethanol, Methanol, and IPA production and storage
Crude oil and gasoline storage and tank farms
Aircraft hangars
Hydrogen plants and storage
Paint and solvent storage
Chemical production, storage, and loading facilities
Power plants
Silane gas storage

QUICK VIEW

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum…

| Item #: FS20X-211-23-4

$4,666.00

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) M25 entries, INMETRO - FS20X-211-23-4

View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) M25 entries, INMETRO - FS20X-211-23-4

Item #	FS20X-211-23-4
Brand

Price: $4,666.00

Quantity:

FS20X-211-23-4 FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) M25 entries, INMETRO by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

FEATURES

Patented WideBand IR™ Infrared combined with Ultraviolet
Detection range greater than 60 m (200 feet) to 0.1 m² (1 sq. ft.) heptane fire
Patented Electronic Frequency Analysis
Visible sensor for optimum false alarm rejection
Selectable detection sensitivities
Solar blind 90° cone-of-vision
Dual microprocessors for reliable performance
Real-time clock for accurate time dating of events
FirePic™ - Up to 6 pre-fire event data storage
Event log - Up to 200 events with date and time stamp
Built-in RS-485 ModBus communication
Built-in non-isolated 4-20 mA analog output (sink or source)
Alarm, Fault and Fire Verification relays
Automatic Optical Path and Electronic self-test
Patented Electronics Module for component protection with plug-in terminations for easy field installation
Two 25 mm conduit entries or two 3/4" NPT
Low power consumption
High RFI and EMI immunity
FM hazardous area approved
Ex d ATEX approved
CU-TR approved
INMETRO approved
Meets SIL 2 requirements
Certified to EN54-10:2002 (option)
FM 3260 performance

BENEFITS

Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
Wide operating temperature range
Arc welding immunity
False alarm rejection
Minimal maintenance for trouble-free operation
PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
Suitable for a wide variety of applications

APPLICATIONS

Refineries and oil production facilities
Off-Shore platforms
Turbine/Compressor enclosures
Acetylene processing and storage
Oil and Gas pipelines and pumping stations
LNG/LPG loading and unloading facilities
Natural Gas and CNG plants
Ethanol, Methanol, and IPA production and storage
Crude oil and gasoline storage and tank farms
Aircraft hangars
Hydrogen plants and storage
Paint and solvent storage
Chemical production, storage, and loading facilities
Power plants
Silane gas storage

QUICK VIEW

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL M25 CU-TR - FS20X-211-23…

| Item #: FS20X-211-23-8

$4,296.00

View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL M25 CU-TR - FS20X-211-23-8

Item #	FS20X-211-23-8
Brand

Price: $4,296.00

Quantity:

FS20X-211-23-8 FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL M25 CU-TR by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

FEATURES

Patented WideBand IR™ Infrared combined with Ultraviolet
Detection range greater than 60 m (200 feet) to 0.1 m² (1 sq. ft.) heptane fire
Patented Electronic Frequency Analysis
Visible sensor for optimum false alarm rejection
Selectable detection sensitivities
Solar blind 90° cone-of-vision
Dual microprocessors for reliable performance
Real-time clock for accurate time dating of events
FirePic™ - Up to 6 pre-fire event data storage
Event log - Up to 200 events with date and time stamp
Built-in RS-485 ModBus communication
Built-in non-isolated 4-20 mA analog output (sink or source)
Alarm, Fault and Fire Verification relays
Automatic Optical Path and Electronic self-test
Patented Electronics Module for component protection with plug-in terminations for easy field installation
Two 25 mm conduit entries or two 3/4" NPT
Low power consumption
High RFI and EMI immunity
FM hazardous area approved
Ex d ATEX approved
CU-TR approved
INMETRO approved
Meets SIL 2 requirements
Certified to EN54-10:2002 (option)
FM 3260 performance

BENEFITS

Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
Wide operating temperature range
Arc welding immunity
False alarm rejection
Minimal maintenance for trouble-free operation
PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
Suitable for a wide variety of applications

APPLICATIONS

Refineries and oil production facilities
Off-Shore platforms
Turbine/Compressor enclosures
Acetylene processing and storage
Oil and Gas pipelines and pumping stations
LNG/LPG loading and unloading facilities
Natural Gas and CNG plants
Ethanol, Methanol, and IPA production and storage
Crude oil and gasoline storage and tank farms
Aircraft hangars
Hydrogen plants and storage
Paint and solvent storage
Chemical production, storage, and loading facilities
Power plants
Silane gas storage

QUICK VIEW

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV 316 Stainless Steel…

| Item #: FS20X-211-24-4

$5,226.00

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV 316 Stainless Steel Encl. with (2) M25 entries, INMETRO - FS20X-211-24-4

View Product Details >

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV 316 Stainless Steel Encl. with (2) M25 entries, INMETRO - FS20X-211-24-4

Item #	FS20X-211-24-4
Brand

Price: $5,226.00

Quantity:

FS20X-211-24-4 FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV 316 Stainless Steel Encl. with (2) M25 entries, INMETRO by Honeywell Analytics

The FS20X is the latest generation high technology Multi Spectrum (UV/Dual IR/VIS) Fire and Flame Detector, which is part of the FSX family of advanced technology Electro-Optical Flame detectors.

FEATURES

Patented WideBand IR™ Infrared combined with Ultraviolet
Detection range greater than 60 m (200 feet) to 0.1 m² (1 sq. ft.) heptane fire
Patented Electronic Frequency Analysis
Visible sensor for optimum false alarm rejection
Selectable detection sensitivities
Solar blind 90° cone-of-vision
Dual microprocessors for reliable performance
Real-time clock for accurate time dating of events
FirePic™ - Up to 6 pre-fire event data storage
Event log - Up to 200 events with date and time stamp
Built-in RS-485 ModBus communication
Built-in non-isolated 4-20 mA analog output (sink or source)
Alarm, Fault and Fire Verification relays
Automatic Optical Path and Electronic self-test
Patented Electronics Module for component protection with plug-in terminations for easy field installation
Two 25 mm conduit entries or two 3/4" NPT
Low power consumption
High RFI and EMI immunity
FM hazardous area approved
Ex d ATEX approved
CU-TR approved
INMETRO approved
Meets SIL 2 requirements
Certified to EN54-10:2002 (option)
FM 3260 performance

BENEFITS

Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
Wide operating temperature range
Arc welding immunity
False alarm rejection
Minimal maintenance for trouble-free operation
PC software and interface module (FSIM) for fault diagnostics real-time graphs (RTGs), and downloading of FirePics™ and event log
Suitable for a wide variety of applications

APPLICATIONS

Refineries and oil production facilities
Off-Shore platforms
Turbine/Compressor enclosures
Acetylene processing and storage
Oil and Gas pipelines and pumping stations
LNG/LPG loading and unloading facilities
Natural Gas and CNG plants
Ethanol, Methanol, and IPA production and storage
Crude oil and gasoline storage and tank farms
Aircraft hangars
Hydrogen plants and storage
Paint and solvent storage
Chemical production, storage, and loading facilities
Power plants
Silane gas storage

Technical Library

Access product manuals, datasheets, software downloads and more.

View Library

Calibration & Repair

Book certified service and repairs using our simple online work-order system.

View Services

Model FS20X, Honeywell Analytics

Category reset

Price Range

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) 3/4 in. NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III - FS20X-211-21-2

FS20X-211-21-2 FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) 3/4 in. NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III by Honeywell Analytics

FEATURES

BENEFITS

APPLICATIONS

Honeywell Analytics IR Test Lamp for Testing FSX Detectors, Explosion Proof version. Includes Universal Charger - TL-2055

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 - FS20X-211-23-3

FS20X-211-23-3 FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 by Honeywell Analytics

FEATURES

BENEFITS

APPLICATIONS

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV 316 Stainless Steel Encl. with (2) M25 entries, ATEX/IECEx, HART module factory installed - FS20X-212-24-3

FS20X-212-24-3 FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV 316 Stainless Steel Encl. with (2) M25 entries, ATEX/IECEx, HART module factory installed by Honeywell Analytics

FEATURES

BENEFITS

APPLICATIONS

Honeywell Analytics Battery Pack for Model FT-2145/TL-1055/Tl-2055 Test Lamps, 12VDC, 2200mA, NiMH - PW-3123-0005

Honeywell Analytics Universal Charger for Fire Sentry Test Lamps and Interface Kits for 110-240 VAC with International Plugs - PSU-12

Honeywell Analytics Field of View Restrictor - FVR-01

Honeywell Analytics Stainless Steel Swivel Mounting Assembly for FS24X, FS20X, SS4, SS2 detectors - SM4

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV SS NPT FM/EN54 - FS20X-211-22-6

FS20X-211-22-6 FS20X Multi-Spectrum Fire and Flame Detector, IR/UV SS NPT FM/EN54 by Honeywell Analytics

FEATURES

BENEFITS

APPLICATIONS

Honeywell Analytics Optional HART Module for FS20X Detectors - FSX-A014

Honeywell Analytics IR Test Lamp for Testing FSX Detectors, Non-explosion Proof version. Includes Universal Charger - TL-1055

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV Copper-free Aluminum Encl. with (2) 3/4 in. entries, FM/cFM, HART module factory installed - FS20X-212-21-2

FS20X-212-21-2 FS20X Multi-Spectrum Fire and Flame Detector, Dual IR/UV Copper-free Aluminum Encl. with (2) 3/4 in. entries, FM/cFM, HART module factory installed by Honeywell Analytics

FEATURES

BENEFITS

APPLICATIONS

Honeywell Analytics Sunshield for SS2, SS4 & FS24X Detectors, 316 Stainless Steel - SH-001

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Stainless Steel Encl. with (2) 3/4 in. NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III - FS20X-211-22-2

FS20X-211-22-2 FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Stainless Steel Encl. with (2) 3/4 in. NPT entries, FM, cFM for Class I, Division 1, Groups A, B, C, D; Class II, Division 1, Groups E, F, G; Class III by Honeywell Analytics

FEATURES

BENEFITS

APPLICATIONS

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Stainless Steel Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 - FS20X-211-24-3

FS20X-211-24-3 FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Stainless Steel Encl. with (2) M25 entries, FM, cFM, ATEX, IECEx for Class I, Zone 1 by Honeywell Analytics

FEATURES

BENEFITS

APPLICATIONS

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV AL M25 FM/EN54 - FS20X-211-23-6

FS20X-211-23-6 FS20X Multi-Spectrum Fire and Flame Detector, IR/UV AL M25 FM/EN54 by Honeywell Analytics

FEATURES

BENEFITS

APPLICATIONS

Honeywell Analytics FS20X Replacement Detector Module - FS20X-211-10

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR STmp, EN54 - FS20X-211-10-6

FS20X-211-10-6 FS20X Multi-Spectrum Fire and Flame Detector, UV/IR STmp, EN54 by Honeywell Analytics

FEATURES

BENEFITS

APPLICATIONS

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL NPT INMETRO - FS20X-211-21-4

FS20X-211-21-4 FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL NPT INMETRO by Honeywell Analytics

FEATURES

BENEFITS

APPLICATIONS

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, IR/UV AL NPT FM/EN54 - FS20X-211-21-6

FS20X-211-21-6 FS20X Multi-Spectrum Fire and Flame Detector, IR/UV AL NPT FM/EN54 by Honeywell Analytics

FEATURES

BENEFITS

APPLICATIONS

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS NPT INMETRO - FS20X-211-22-4

FS20X-211-22-4 FS20X Multi-Spectrum Fire and Flame Detector, UV/IR SS NPT INMETRO by Honeywell Analytics

FEATURES

BENEFITS

APPLICATIONS

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) M25 entries, INMETRO - FS20X-211-23-4

FS20X-211-23-4 FS20X Multi-Spectrum Fire and Flame Detector, DUAL IR/UV Copper-Free Aluminum Encl. with (2) M25 entries, INMETRO by Honeywell Analytics

FEATURES

BENEFITS

APPLICATIONS

Honeywell Analytics FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL M25 CU-TR - FS20X-211-23-8

FS20X-211-23-8 FS20X Multi-Spectrum Fire and Flame Detector, UV/IR AL M25 CU-TR by Honeywell Analytics

FEATURES