Fixed Systems, Crowcon Gas Monitors

123-HF Gasflag Hydrogen Fluoride, 0-10ppm by Crowcon

Gasflag is a control system for monitoring any 4-20mA flammable, toxic or oxygen gas detector. Gasflag is ideally suited to light industrial or commercial applications such as LPG monitoring on garage forecourts, chlorine detection in swimming pool dosing rooms, or methane detection in boiler rooms.

Gasflag features a loud sounder, bright LED indicators and relays for switching external devices such as audible visual alarms or valves.

Easy and safe to use - Bright alarm annunciator

• Loud internal audible alarm
• Clear sytem intergrity indication

Fully Flexible

• Accepts industry standard 4-20mA inputs
• Multiple units can be daisy chained
• Variable alarm configurations

No hidden costs

• Integral alarm outputs
• Simple installation
• Minimum maintenance
• One button operation

123-NH3 Gasflag Ammonia, 0-50ppm by Crowcon

Gasflag is a control system for monitoring any 4-20mA flammable, toxic or oxygen gas detector. Gasflag is ideally suited to light industrial or commercial applications such as LPG monitoring on garage forecourts, chlorine detection in swimming pool dosing rooms, or methane detection in boiler rooms.

Gasflag features a loud sounder, bright LED indicators and relays for switching external devices such as audible visual alarms or valves.

Easy and safe to use - Bright alarm annunciator

• Loud internal audible alarm
• Clear sytem intergrity indication

Fully Flexible

• Accepts industry standard 4-20mA inputs
• Multiple units can be daisy chained
• Variable alarm configurations

No hidden costs

• Integral alarm outputs
• Simple installation
• Minimum maintenance
• One button operation

123-NO2 Gasflag Nitrogen Dioxide, 0-10ppm by Crowcon

Gasflag is a control system for monitoring any 4-20mA flammable, toxic or oxygen gas detector. Gasflag is ideally suited to light industrial or commercial applications such as LPG monitoring on garage forecourts, chlorine detection in swimming pool dosing rooms, or methane detection in boiler rooms.

Gasflag features a loud sounder, bright LED indicators and relays for switching external devices such as audible visual alarms or valves.

Easy and safe to use - Bright alarm annunciator

• Loud internal audible alarm
• Clear sytem intergrity indication

Fully Flexible

• Accepts industry standard 4-20mA inputs
• Multiple units can be daisy chained
• Variable alarm configurations

No hidden costs

• Integral alarm outputs
• Simple installation
• Minimum maintenance
• One button operation

123-O2 Gasflag Oxygen, 0-25% V/V by Crowcon

Gasflag is a control system for monitoring any 4-20mA flammable, toxic or oxygen gas detector. Gasflag is ideally suited to light industrial or commercial applications such as LPG monitoring on garage forecourts, chlorine detection in swimming pool dosing rooms, or methane detection in boiler rooms.

Gasflag features a loud sounder, bright LED indicators and relays for switching external devices such as audible visual alarms or valves.

Easy and safe to use - Bright alarm annunciator

• Loud internal audible alarm
• Clear sytem intergrity indication

Fully Flexible

• Accepts industry standard 4-20mA inputs
• Multiple units can be daisy chained
• Variable alarm configurations

No hidden costs

• Integral alarm outputs
• Simple installation
• Minimum maintenance
• One button operation

123-O3 Gasflag Ozone, 0-1ppm by Crowcon

Gasflag is a control system for monitoring any 4-20mA flammable, toxic or oxygen gas detector. Gasflag is ideally suited to light industrial or commercial applications such as LPG monitoring on garage forecourts, chlorine detection in swimming pool dosing rooms, or methane detection in boiler rooms.

Gasflag features a loud sounder, bright LED indicators and relays for switching external devices such as audible visual alarms or valves.

Easy and safe to use - Bright alarm annunciator

• Loud internal audible alarm
• Clear sytem intergrity indication

Fully Flexible

• Accepts industry standard 4-20mA inputs
• Multiple units can be daisy chained
• Variable alarm configurations

No hidden costs

• Integral alarm outputs
• Simple installation
• Minimum maintenance
• One button operation

123-PH3 Gasflag Phosphine, 0-5ppm by Crowcon

Gasflag is a control system for monitoring any 4-20mA flammable, toxic or oxygen gas detector. Gasflag is ideally suited to light industrial or commercial applications such as LPG monitoring on garage forecourts, chlorine detection in swimming pool dosing rooms, or methane detection in boiler rooms.

Gasflag features a loud sounder, bright LED indicators and relays for switching external devices such as audible visual alarms or valves.

Easy and safe to use - Bright alarm annunciator

• Loud internal audible alarm
• Clear sytem intergrity indication

Fully Flexible

• Accepts industry standard 4-20mA inputs
• Multiple units can be daisy chained
• Variable alarm configurations

No hidden costs

• Integral alarm outputs
• Simple installation
• Minimum maintenance
• One button operation

123-SO2 Gasflag Sulfur Dioxide, 0-10ppm by Crowcon

Gasflag is a control system for monitoring any 4-20mA flammable, toxic or oxygen gas detector. Gasflag is ideally suited to light industrial or commercial applications such as LPG monitoring on garage forecourts, chlorine detection in swimming pool dosing rooms, or methane detection in boiler rooms.

Gasflag features a loud sounder, bright LED indicators and relays for switching external devices such as audible visual alarms or valves.

Easy and safe to use - Bright alarm annunciator

• Loud internal audible alarm
• Clear sytem intergrity indication

Fully Flexible

• Accepts industry standard 4-20mA inputs
• Multiple units can be daisy chained
• Variable alarm configurations

No hidden costs

• Integral alarm outputs
• Simple installation
• Minimum maintenance
• One button operation

1385-1 UV High Temperature Flame Detector (660) - Aluminium by Crowcon

Crowcon supplies a wide range of detectors designed to detect flames extremely quickly and over long distances. The detectors can operate in difficult envonmental conditions and incorporate sophisticated algorithms and logic to prevent false alarms.

Features:

• Explosion proof ATEX, FM, CSA and GOST-R standards
• IR, UV, UV/IR and IR3 options
• Aluminium or stainless steel construction
• 4-20mA, RS-485 or standard 4-wire relay operation

1667-1 Gasmonitor Plus 24 V 750 W Power Supply 100-260 V AC by Crowcon

Gasmonitor Plus is our flexible microprocessor controlled system designed with a modular approach, so you get exactly what you want.

Used throughout the world, both on and offshore, Gasmonitor Plus provides the cost effective solution to your system requirements. Gasmonitor Plus, the gas and fire control system you can trust.

Simple to use

• Gasmonitor Plus offers flexibility whilst still providing simple operation. All the day to day functions are accessible via push buttons on the front panel.
• As well as a rolling display, indicating the channel currently monitored, each channel has a bar graph display. This unique bar graph format is ranged to indicate readings below the first alarm setting, providing an instantaneous representation of the gas concentration on every detector.
• Common alarm LEDs on the display card and individual alarms on the panel only light when a hazard or fault is detected. This means the whole rack status can be checked at a glance.

Flexible architecture

• Each channel has three levels of alarm as well as a dedicated analogue output, set as 4-20 mA as standard.
• Optional relay modules can interface to the panel to provide up to a total of 84 output relays per rack. Sixteen of these relays can be configured/voted from a combination of the three levels of alarm per channel.
• The RS232 digital interface provides connectivity with PC for configuration, monitoring and datalog upload. Each rack is uniquely addressable, making multi-drop architectures possible. This cuts down on configuration and monitoring cabling.

Ground breaking design

• Gasmonitor Plus is a microprocessor based expandable control system, which can be multiplied to offer unlimited channels and outputs.
• Its modular construction provides ultimate customisation capacity with minimal wiring.
• Gasmonitor Plus has industry standard analogue outputs, and the mechanical design is based on 19 Eurorack. This means that the Gasmonitor Plus will integrate fully with existing rack mounted protection systems on site.
• The alochrome finish and rack screening plates ensure that the Gasmonitor Plus is impervious to radio frequency interferance.

Easy maintenance

• Gasmonitor Plus has been designed with easy servicing and maintenance in mind.
• Each channel is inhibited separately so that plant safety is not compromised during maintenance checks.
• Routine calibration can be achieved from the front panel. The one man calibration feature reduces the service overhead by half.
• One universal gas card architecture controls all gas detectors. This reduces the spares holding required for Gasmonitor Plus maintenance. Each control card is fitted with its own dedicated micro-controller so it can function independently in the event of a single point failure.

2010-1 UV/IR Flame Detector (20/20L) by Crowcon

Crowcon supplies a wide range of detectors designed to detect flames extremely quickly and over long distances. The detectors can operate in difficult envonmental conditions and incorporate sophisticated algorithms and logic to prevent false alarms.

Features:

• Explosion proof ATEX, FM, CSA and GOST-R standards
• IR, UV, UV/IR and IR3 options
• Aluminium or stainless steel construction
• 4-20mA, RS-485 or standard 4-wire relay operation

202ST Hydrocarbon Duct Mounting Open Path Detector (3-12 m), Xenon Flash by Crowcon

Open Path IR or "line of sight" optical gas detectors offer reliable detection of hydrocarbon gas emmissions over large areas. OPIR detectors detect gas hazards ranging from low level Parts Per Million (PPM) levels to Lower Exposure Limit (LEL) levels in hazardous areas.

Features:

• Hydrocarbon and H2S versions available
• Explosion proof to ATEX, UL and GOST-R Standards
• Choice of models for ranges of 0.6m up to 140m
• Aluminium or stainless steel construction
• 4-20mA or RS-485 operation, with alarm and fault relays available

203ST Hydrocarbon Open Path Detector (10-40 m), Xenon Flash by Crowcon

Open Path IR or "line of sight" optical gas detectors offer reliable detection of hydrocarbon gas emmissions over large areas. OPIR detectors detect gas hazards ranging from low level Parts Per Million (PPM) levels to Lower Exposure Limit (LEL) levels in hazardous areas.

Features:

• Hydrocarbon and H2S versions available
• Explosion proof to ATEX, UL and GOST-R Standards
• Choice of models for ranges of 0.6m up to 140m
• Aluminium or stainless steel construction
• 4-20mA or RS-485 operation, with alarm and fault relays available

204ST Hydrocarbon Open Path Detector (15-60 m), Xenon Flash by Crowcon

Open Path IR or "line of sight" optical gas detectors offer reliable detection of hydrocarbon gas emmissions over large areas. OPIR detectors detect gas hazards ranging from low level Parts Per Million (PPM) levels to Lower Exposure Limit (LEL) levels in hazardous areas.

Features:

• Hydrocarbon and H2S versions available
• Explosion proof to ATEX, UL and GOST-R Standards
• Choice of models for ranges of 0.6m up to 140m
• Aluminium or stainless steel construction
• 4-20mA or RS-485 operation, with alarm and fault relays available

2060-1 UV Flame Detector (660) - Aluminium by Crowcon

Crowcon supplies a wide range of detectors designed to detect flames extremely quickly and over long distances. The detectors can operate in difficult envonmental conditions and incorporate sophisticated algorithms and logic to prevent false alarms.

Features:

• Explosion proof ATEX, FM, CSA and GOST-R standards
• IR, UV, UV/IR and IR3 options
• Aluminium or stainless steel construction
• 4-20mA, RS-485 or standard 4-wire relay operation

2087-1 UV Flame Detector (20/20U) by Crowcon

Crowcon supplies a wide range of detectors designed to detect flames extremely quickly and over long distances. The detectors can operate in difficult envonmental conditions and incorporate sophisticated algorithms and logic to prevent false alarms.

Features:

• Explosion proof ATEX, FM, CSA and GOST-R standards
• IR, UV, UV/IR and IR3 options
• Aluminium or stainless steel construction
• 4-20mA, RS-485 or standard 4-wire relay operation

226ST Hydrocarbon Open Path Detector (30-90 m), Xenon Flash by Crowcon

Open Path IR or "line of sight" optical gas detectors offer reliable detection of hydrocarbon gas emmissions over large areas. OPIR detectors detect gas hazards ranging from low level Parts Per Million (PPM) levels to Lower Exposure Limit (LEL) levels in hazardous areas.

Features:

• Hydrocarbon and H2S versions available
• Explosion proof to ATEX, UL and GOST-R Standards
• Choice of models for ranges of 0.6m up to 140m
• Aluminium or stainless steel construction
• 4-20mA or RS-485 operation, with alarm and fault relays available

227ST Hydrocarbon Open Path Detector (50-140 m), Xenon Flash by Crowcon

Open Path IR or "line of sight" optical gas detectors offer reliable detection of hydrocarbon gas emmissions over large areas. OPIR detectors detect gas hazards ranging from low level Parts Per Million (PPM) levels to Lower Exposure Limit (LEL) levels in hazardous areas.

Features:

• Hydrocarbon and H2S versions available
• Explosion proof to ATEX, UL and GOST-R Standards
• Choice of models for ranges of 0.6m up to 140m
• Aluminium or stainless steel construction
• 4-20mA or RS-485 operation, with alarm and fault relays available

2364-1 UV/IR Flame Detector with Automatic Self-Test (20/20LB) by Crowcon

Crowcon supplies a wide range of detectors designed to detect flames extremely quickly and over long distances. The detectors can operate in difficult envonmental conditions and incorporate sophisticated algorithms and logic to prevent false alarms.

Features:

• Explosion proof ATEX, FM, CSA and GOST-R standards
• IR, UV, UV/IR and IR3 options
• Aluminium or stainless steel construction
• 4-20mA, RS-485 or standard 4-wire relay operation

239-1 UV High Temperature Flame Detector With Self-Test (660) - Aluminium by Crowcon

Crowcon supplies a wide range of detectors designed to detect flames extremely quickly and over long distances. The detectors can operate in difficult envonmental conditions and incorporate sophisticated algorithms and logic to prevent false alarms.

Features:

• Explosion proof ATEX, FM, CSA and GOST-R standards
• IR, UV, UV/IR and IR3 options
• Aluminium or stainless steel construction
• 4-20mA, RS-485 or standard 4-wire relay operation