$1000 - $2000, Crowcon Gas Monitors

TXgard and Flamgard Plus

With over 40 years of experience in gas detection technology and development, Crowcon Detection Instruments is pleased to present one of its most economical gas sensing devices. With its one man calibration system, life-long sensors, and simple parts replacement, the Txgard and Flamgard Plus range of detectors offer a reliable and cost efficient solution for most gas detection needs.

With its mission to protect people and plant from gas hazards, the newest line of gas detecting instruments include exclusive state of the art features including:

• Marine grade with stainless steel housing
• A wide range of reliable and advanced gas detecting sensors
• Flexible output options
• Optional relays for alarm and fault
• Quick response times
• Easy to read screen displays
• Easy to operate calibration methods
• Efficient and economical sensor and gas detection technology

Rugged, Reliable, and Flexible

The detector models are constructed to withstand the abuse of hazardous work environments. The TXgard and Flamgard Plus detectors use marine grade aluminum with a stainless steel sensor housing to ensure the safety and integrity of the equipment. The TXgard-IS+ is constructed of carbon-loaded nylon. The models also feature flexible output options including 2 or 3 wire formats, optional relays for alarm and fault, and 4-20mA current sink or source. Crowcon also has a wide variety of catalytic and electrochemical gas sensors to fit these models (currently offering more than 25 individual gas sensors).

Flamgard Plus and TXgardPlus Specifications

The Flamgard Plus and TXgard Plus models are similar in size (200 x 115 x 115 mm) and weight (2.2 kilograms). However, the Flamgard Plus utilizes a catalytic bead sensor and the TXgard Plus utilizes an electrochemical sensor. Both feature an ingress protection with an IP66 weatherproof cap and 2 x M20 x ½ NPT cable entries. These models feature optional relays of SPNO or SPNC contacts rated 30 Vdc 1A (non-inductive load) for Alarm 1 and fault for Alarm 2.

For easy reading, these models have a 3 digit backlit display with and LED status indicator. The magnetically operated buttons control the calibration method and the terminals are suited for up to 1.5 mm2 cable. Both models are suited for usage in hazardous zones 1 and 2.

TXgard IS+ and Specs

The TXgard IS+ is slightly smaller than the other two models and houses an electrochemical sensor type. It is approximately 160 x 123 x 92 mm in size and .7 kilograms in weight. This unit also features an IP66 weatherproof cap for ingress protection. The display is slightly smaller than the other two models, and offers a 2 line 16 character LCD screen. The calibration method is operated via front mounted push buttons, and its terminals are suited for up to 2.5 mm2 cables. This model is appropriate for hazardous zones 0, 1, and 2, and when connected via an isolation device, the TXgard IS+ is suited for hazardous zones 20, 21, and 22.

TXgard and Flamgard Plus

With over 40 years of experience in gas detection technology and development, Crowcon Detection Instruments is pleased to present one of its most economical gas sensing devices. With its one man calibration system, life-long sensors, and simple parts replacement, the Txgard and Flamgard Plus range of detectors offer a reliable and cost efficient solution for most gas detection needs.

With its mission to protect people and plant from gas hazards, the newest line of gas detecting instruments include exclusive state of the art features including:

• Marine grade with stainless steel housing
• A wide range of reliable and advanced gas detecting sensors
• Flexible output options
• Optional relays for alarm and fault
• Quick response times
• Easy to read screen displays
• Easy to operate calibration methods
• Efficient and economical sensor and gas detection technology

Rugged, Reliable, and Flexible

The detector models are constructed to withstand the abuse of hazardous work environments. The TXgard and Flamgard Plus detectors use marine grade aluminum with a stainless steel sensor housing to ensure the safety and integrity of the equipment. The TXgard-IS+ is constructed of carbon-loaded nylon. The models also feature flexible output options including 2 or 3 wire formats, optional relays for alarm and fault, and 4-20mA current sink or source. Crowcon also has a wide variety of catalytic and electrochemical gas sensors to fit these models (currently offering more than 25 individual gas sensors).

Flamgard Plus and TXgardPlus Specifications

The Flamgard Plus and TXgard Plus models are similar in size (200 x 115 x 115 mm) and weight (2.2 kilograms). However, the Flamgard Plus utilizes a catalytic bead sensor and the TXgard Plus utilizes an electrochemical sensor. Both feature an ingress protection with an IP66 weatherproof cap and 2 x M20 x ½ NPT cable entries. These models feature optional relays of SPNO or SPNC contacts rated 30 Vdc 1A (non-inductive load) for Alarm 1 and fault for Alarm 2.

For easy reading, these models have a 3 digit backlit display with and LED status indicator. The magnetically operated buttons control the calibration method and the terminals are suited for up to 1.5 mm2 cable. Both models are suited for usage in hazardous zones 1 and 2.

TXgard IS+ and Specs

The TXgard IS+ is slightly smaller than the other two models and houses an electrochemical sensor type. It is approximately 160 x 123 x 92 mm in size and .7 kilograms in weight. This unit also features an IP66 weatherproof cap for ingress protection. The display is slightly smaller than the other two models, and offers a 2 line 16 character LCD screen. The calibration method is operated via front mounted push buttons, and its terminals are suited for up to 2.5 mm2 cables. This model is appropriate for hazardous zones 0, 1, and 2, and when connected via an isolation device, the TXgard IS+ is suited for hazardous zones 20, 21, and 22.

Tetra 3 IR Multigas Personal Monitor with Charger by Crowcon

The Tetra:3 multi-gas monitor is a compact, robust and easy to use diffusion based detector.

Single button operation, small size and clear top-mounted display make it a favourite in the market amongst those working in demanding industrial environments such as those in the water, telecoms, food, brewing or hydrocarbons sectors.

Despite its compact size the Tetra:3 is ultra-rugged and water proof.

• Up to 4 gases in a small and lightweight design
• Infra-red carbon dixoide sensor version for safe area use (ie non-explosion risk areas)
• Single button operation for all functions, can be operated with gloved hands
• Rugged impact resistant design provides extra shock and vibration protection
• Reliable Lithium-ion battery provides over 16 hours continuous operation from a single charge with no memory effects.
• Water and Dust resistant to IP67, can be submerged in water
• Rapid and effective warning with a 95 dBa audible alarm, an extremely bright red/blue visual alarm and vibrating alarm as standard.
• Top mounted, backlit display of all gas readings, diagnostics and battery life.

Gases include the most common four (carbon monoxide, methane, oxygen and hydrogen sulphide), but also an expanded range: ammonia, ozone, sulphur dioxide, H2 filtered CO (for steel plants) and IR carbon dioxide (for safe area use only).

Triple Plus+ Multigas Personal Monitor by Crowcon

Triple Plus+ is a multigas detector providing triple protection, against toxic, oxygen and flammable gas hazards.

Intrinsically safe, the Triple Plus+ provides enhanced capabilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Clear and unambiguous

• Piercing 85dB audible alarm - Ensures clear warning and Gives you confidence in the operating status of the Triple Plus+ unit
• Vivid LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Timed data logging with 100-hour capacity

Simple to customise

• Wide array of sensors available - Can be tailored to fit the requirements of any job scenario with a gas risk

Durable

• Triax™ casing will not crack or shatter when dropped - System integrity and operation assured
• Full bouyancy - Makes recovery from water possible

Easy to maintain

• User menus allow calibration with or without connecting to a PC - Simple calibration procedure ensures operational effectiveness

IR option

• No poisoning effects - Works well where catalytic pellistors would perform poorly
• Long life sensor and no burnout - Reduced cost of ownership
• % vol. measurement for purging applications
• % LEL measurement in air or inert backgrounds
• Single or dual range measurement
• IR CO₂ detection, 0 5%

Triple Plus+ IR Multigas Personal Monitor by Crowcon

Triple Plus+ is a multigas detector providing triple protection, against toxic, oxygen and flammable gas hazards.

Intrinsically safe, the Triple Plus+ provides enhanced capabilities for safety and detector fleet managers including selection of flammable gas correction factors (so one unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Clear and unambiguous

• Piercing 85dB audible alarm - Ensures clear warning and Gives you confidence in the operating status of the Triple Plus+ unit
• Vivid LED alarms with top visibility
• Confidence blip, low battery and TWA warnings
• Timed data logging with 100-hour capacity

Simple to customise

• Wide array of sensors available - Can be tailored to fit the requirements of any job scenario with a gas risk

Durable

• Triax™ casing will not crack or shatter when dropped - System integrity and operation assured
• Full bouyancy - Makes recovery from water possible

Easy to maintain

• User menus allow calibration with or without connecting to a PC - Simple calibration procedure ensures operational effectiveness

IR option

• No poisoning effects - Works well where catalytic pellistors would perform poorly
• Long life sensor and no burnout - Reduced cost of ownership
• % vol. measurement for purging applications
• % LEL measurement in air or inert backgrounds
• Single or dual range measurement
• IR CO₂ detection, 0 5%