RKI Instruments

73-0591RK RX-415 Dual Gas IR For LEL/Volume HC & Oxygen, 0 - 100% LEL & 0 - 100% Vol CH4, & 0 - 25% O2, Land Version (CH4 Calibration) by RKI Instruments

This model has two versions and is a combination type portable HC/O2 or CH4/O2 gas detector with an Infrared (NDIR) type sensor and galvanic cell type sensor. These sensors provide accurate detection of HC/O2 (HC version) or CH4/O2 (CH4 version) levels even in N2 and other inert environments. The measuring ranges are 0-100%LEL/0-100 vol% for HC or CH4 and 0-25 vol% for )2 respectively with automatic ranging. The RX-415 has explosion proof and intrinsically safe construction so that it can be used safely in any environment.

Features

• Available to measure from higher concentration (vol%) to lower concentration (%LEL)
• Explosion proof (Detector: Explosion proof, other electrical circuit and pump, intrinsically safe design)
• Available to measure HC/O2, CH4/O2 in N2, inert gas and air with a reliable NDIR method

Applications

• Measures gas concentrations in tank of LNG and LPG carriers
• Measures gas concentrations in crude oil tankers
• Measures gas concentration in inert gas generating system (IGS)

*Please note we can only ship RKI products to customers within the United States

73-0591RK-ATEX RX-415 Dual Gas IR For LEL/Volume HC & Oxygen, 0 - 100% LEL & 0 - 100% Vol CH4, & 0 - 25% O2, Land Version (CH4 Calibration) with ATEX/BASEEFA Approval by RKI Instruments

This model has two versions and is a combination type portable HC/O2 or CH4/O2 gas detector with an Infrared (NDIR) type sensor and galvanic cell type sensor. These sensors provide accurate detection of HC/O2 (HC version) or CH4/O2 (CH4 version) levels even in N2 and other inert environments. The measuring ranges are 0-100%LEL/0-100 vol% for HC or CH4 and 0-25 vol% for )2 respectively with automatic ranging. The RX-415 has explosion proof and intrinsically safe construction so that it can be used safely in any environment.

Features

• Available to measure from higher concentration (vol%) to lower concentration (%LEL)
• Explosion proof (Detector: Explosion proof, other electrical circuit and pump, intrinsically safe design)
• Available to measure HC/O2, CH4/O2 in N2, inert gas and air with a reliable NDIR method

Applications

• Measures gas concentrations in tank of LNG and LPG carriers
• Measures gas concentrations in crude oil tankers
• Measures gas concentration in inert gas generating system (IGS)

*Please note we can only ship RKI products to customers within the United States

73-0611RK RX-516 Multigas IR Monitor, 0 - 100% LEL/0 - 100% Vol HC/0 - 25% O2/0 - 100 PPM H2S by RKI Instruments

The Crude Oil Tanker model is a combination type portable HC, O2, and H2s gas detector with an Infrared (NDIR) type sensor, galvanic cell type sensor and Electro-chemical cell type sensor. These sensors provide accurate detection of HC, O2 and H2S levels even in N2 and other inert environments. The measuring ranges of model RX-516 are 0-100%LEL / 0-10%vol for HC, 0-25% vol for O2 and 0-100.0ppm for H2S respectively. A higher range for H2S (0-1,000ppm) is available in model RX-517. A manual switch is used to change the flow to a unique path for high H2S applications to protect the other sensors. The RX-516 / RX-517 has an explosion proof and Intrinsically Safe design so that it can be used safely in any envrionment.

Features

• Dual range detection of CH4 or HC in %vol and %LEL.
• Unique gas combinations include: CH4/O2/CO/CO2/HC/O2/H2S
• Accurately measure CH4 or HC from inerted tanks with infrared sensor.
• High range H2S 0-1,000ppm available (RX-517).
• Intrinsically safe design.
• Datalogging (Max 30 hours of interval trend).

Application

• Crude oil tanker storage tank gas monitoring

*Please note we can only ship RKI products to customers within the United States

73-0615 RX-8000 Dual Gas IR Monitor, 0-100% LEL & 0-100% vol CH4, & 0-25% O2, Land Version (methane calibration) with Alkaline Battery Pack by RKI Instruments

Building on and improving the very successful Riken model RI-415 / RX-415, the RX-8000 Series is designed for measuring Hydrocarbons and Oxygen in inert or air atmospheres using Riken s proven IrDA sensor technology. Typically used for measuring gas concentration in tanks or piping during inerting/purging applications, and tank maintenance work.

There are two versions of the instrument with with either an HC iso-butane (i-C4H10) or CH4 methane (CH4) NDIR sensor, both are auto-ranging between 0-100%LEL and 0-100 vol%. The optional Oxygen sensor has a range of 0-40%vol.

Features:

• Real-time detection for Combustibles 100%LEL /100vol%, O2
• Large simultaneous display with auto back lighting
• Strong sample drawing capability
• Loud alarm buzzer with 95dB
• 3 bright LED alarm windows
• ATEX ExiaIICT4 /MED
• Water and dust resistant IP67
• Lithium-ion rechargeable battery
• Compact and light weight
• Ergonomic design with waist strap for hands free operation
• Datalogging standard

Applications:

• Oil tanker
• Gas carrier
• Product tanker
• Refineries/Petrochemical/Chemical plants
• Confined space
• Gas plant/Gas supplier services
• Power plant
• Water/Wastewater treatment
• Utilities

*Please note we can only ship RKI products to customers within the United States

73-0616 RX-8000 Dual Gas IR Monitor, 0-100% LEL & 0-100% vol HC, & 0-25% O2, (isobutane calibration) with Alkaline Battery Pack by RKI Instruments

Building on and improving the very successful Riken model RI-415 / RX-415, the RX-8000 Series is designed for measuring Hydrocarbons and Oxygen in inert or air atmospheres using Riken s proven IrDA sensor technology. Typically used for measuring gas concentration in tanks or piping during inerting/purging applications, and tank maintenance work.

There are two versions of the instrument with with either an HC iso-butane (i-C4H10) or CH4 methane (CH4) NDIR sensor, both are auto-ranging between 0-100%LEL and 0-100 vol%. The optional Oxygen sensor has a range of 0-40%vol.

Features:

• Real-time detection for Combustibles 100%LEL /100vol%, O2
• Large simultaneous display with auto back lighting
• Strong sample drawing capability
• Loud alarm buzzer with 95dB
• 3 bright LED alarm windows
• ATEX ExiaIICT4 /MED
• Water and dust resistant IP67
• Lithium-ion rechargeable battery
• Compact and light weight
• Ergonomic design with waist strap for hands free operation
• Datalogging standard

Applications:

• Oil tanker
• Gas carrier
• Product tanker
• Refineries/Petrochemical/Chemical plants
• Confined space
• Gas plant/Gas supplier services
• Power plant
• Water/Wastewater treatment
• Utilities

*Please note we can only ship RKI products to customers within the United States

73-0616C RX-8000 Dual Gas IR Monitor, 0-100% LEL & 0-100% vol HC, & 0-25% O2, (isobutane calibration) with Lithium Ion Battery Pack and 115 / 220 VAC Charger by RKI Instruments

Building on and improving the very successful Riken model RI-415 / RX-415, the RX-8000 Series is designed for measuring Hydrocarbons and Oxygen in inert or air atmospheres using Riken s proven IrDA sensor technology. Typically used for measuring gas concentration in tanks or piping during inerting/purging applications, and tank maintenance work.

There are two versions of the instrument with with either an HC iso-butane (i-C4H10) or CH4 methane (CH4) NDIR sensor, both are auto-ranging between 0-100%LEL and 0-100 vol%. The optional Oxygen sensor has a range of 0-40%vol.

Features:

• Real-time detection for Combustibles 100%LEL /100vol%, O2
• Large simultaneous display with auto back lighting
• Strong sample drawing capability
• Loud alarm buzzer with 95dB
• 3 bright LED alarm windows
• ATEX ExiaIICT4 /MED
• Water and dust resistant IP67
• Lithium-ion rechargeable battery
• Compact and light weight
• Ergonomic design with waist strap for hands free operation
• Datalogging standard

Applications:

• Oil tanker
• Gas carrier
• Product tanker
• Refineries/Petrochemical/Chemical plants
• Confined space
• Gas plant/Gas supplier services
• Power plant
• Water/Wastewater treatment
• Utilities

*Please note we can only ship RKI products to customers within the United States

73-0617 RX-8000 IR Combustible Monitor, 0-100% LEL & 0-100% vol CH4 (methane calibration) with Alkaline Battery Pack by RKI Instruments

Building on and improving the very successful Riken model RI-415 / RX-415, the RX-8000 Series is designed for measuring Hydrocarbons and Oxygen in inert or air atmospheres using Riken s proven IrDA sensor technology. Typically used for measuring gas concentration in tanks or piping during inerting/purging applications, and tank maintenance work.

There are two versions of the instrument with with either an HC iso-butane (i-C4H10) or CH4 methane (CH4) NDIR sensor, both are auto-ranging between 0-100%LEL and 0-100 vol%. The optional Oxygen sensor has a range of 0-40%vol.

Features:

• Real-time detection for Combustibles 100%LEL /100vol%, O2
• Large simultaneous display with auto back lighting
• Strong sample drawing capability
• Loud alarm buzzer with 95dB
• 3 bright LED alarm windows
• ATEX ExiaIICT4 /MED
• Water and dust resistant IP67
• Lithium-ion rechargeable battery
• Compact and light weight
• Ergonomic design with waist strap for hands free operation
• Datalogging standard

Applications:

• Oil tanker
• Gas carrier
• Product tanker
• Refineries/Petrochemical/Chemical plants
• Confined space
• Gas plant/Gas supplier services
• Power plant
• Water/Wastewater treatment
• Utilities

*Please note we can only ship RKI products to customers within the United States

73-0617C RX-8000 IR Combustible Monitor, 0-100% LEL & 0-100% vol CH4 (methane calibration) with Lithium Ion Battery Pack and 115 / 220 VAC Charger by RKI Instruments

Building on and improving the very successful Riken model RI-415 / RX-415, the RX-8000 Series is designed for measuring Hydrocarbons and Oxygen in inert or air atmospheres using Riken s proven IrDA sensor technology. Typically used for measuring gas concentration in tanks or piping during inerting/purging applications, and tank maintenance work.

There are two versions of the instrument with with either an HC iso-butane (i-C4H10) or CH4 methane (CH4) NDIR sensor, both are auto-ranging between 0-100%LEL and 0-100 vol%. The optional Oxygen sensor has a range of 0-40%vol.

Features:

• Real-time detection for Combustibles 100%LEL /100vol%, O2
• Large simultaneous display with auto back lighting
• Strong sample drawing capability
• Loud alarm buzzer with 95dB
• 3 bright LED alarm windows
• ATEX ExiaIICT4 /MED
• Water and dust resistant IP67
• Lithium-ion rechargeable battery
• Compact and light weight
• Ergonomic design with waist strap for hands free operation
• Datalogging standard

Applications:

• Oil tanker
• Gas carrier
• Product tanker
• Refineries/Petrochemical/Chemical plants
• Confined space
• Gas plant/Gas supplier services
• Power plant
• Water/Wastewater treatment
• Utilities

*Please note we can only ship RKI products to customers within the United States

73-0618 RX-8000 IR Combustible Monitor, 0-100% LEL & 0-100% vol HC (isobutane calibration) with Alkaline Battery Pack by RKI Instruments

Building on and improving the very successful Riken model RI-415 / RX-415, the RX-8000 Series is designed for measuring Hydrocarbons and Oxygen in inert or air atmospheres using Riken s proven IrDA sensor technology. Typically used for measuring gas concentration in tanks or piping during inerting/purging applications, and tank maintenance work.

There are two versions of the instrument with with either an HC iso-butane (i-C4H10) or CH4 methane (CH4) NDIR sensor, both are auto-ranging between 0-100%LEL and 0-100 vol%. The optional Oxygen sensor has a range of 0-40%vol.

Features:

• Real-time detection for Combustibles 100%LEL /100vol%, O2
• Large simultaneous display with auto back lighting
• Strong sample drawing capability
• Loud alarm buzzer with 95dB
• 3 bright LED alarm windows
• ATEX ExiaIICT4 /MED
• Water and dust resistant IP67
• Lithium-ion rechargeable battery
• Compact and light weight
• Ergonomic design with waist strap for hands free operation
• Datalogging standard

Applications:

• Oil tanker
• Gas carrier
• Product tanker
• Refineries/Petrochemical/Chemical plants
• Confined space
• Gas plant/Gas supplier services
• Power plant
• Water/Wastewater treatment
• Utilities

*Please note we can only ship RKI products to customers within the United States

73-0618C RX-8000 IR Combustible Monitor, 0-100% LEL & 0-100% vol HC (isobutane calibration) with Lithium Ion Battery Pack and 115 / 220 VAC Charger by RKI Instruments

Building on and improving the very successful Riken model RI-415 / RX-415, the RX-8000 Series is designed for measuring Hydrocarbons and Oxygen in inert or air atmospheres using Riken s proven IrDA sensor technology. Typically used for measuring gas concentration in tanks or piping during inerting/purging applications, and tank maintenance work.

There are two versions of the instrument with with either an HC iso-butane (i-C4H10) or CH4 methane (CH4) NDIR sensor, both are auto-ranging between 0-100%LEL and 0-100 vol%. The optional Oxygen sensor has a range of 0-40%vol.

Features:

• Real-time detection for Combustibles 100%LEL /100vol%, O2
• Large simultaneous display with auto back lighting
• Strong sample drawing capability
• Loud alarm buzzer with 95dB
• 3 bright LED alarm windows
• ATEX ExiaIICT4 /MED
• Water and dust resistant IP67
• Lithium-ion rechargeable battery
• Compact and light weight
• Ergonomic design with waist strap for hands free operation
• Datalogging standard

Applications:

• Oil tanker
• Gas carrier
• Product tanker
• Refineries/Petrochemical/Chemical plants
• Confined space
• Gas plant/Gas supplier services
• Power plant
• Water/Wastewater treatment
• Utilities

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

73-1020RK-02 PS 2 Single Point Stand Alone Monitor for PPM Detection, 24 VDC Powered by RKI Instruments

A perfect low cost solution for hydrogen detection in battery rooms, or for LEL or PPM level detection of a variety of flammable or solvent vapors in general industry.

The Model PS 2 is a multipurpose gas monitor utilizing a MOS (metal oxide sensor) for long lasting and low maintenance detection at the LEL or PPM levels of many gases or vapors. The PS 2 has two alarm levels for increasing gas or vapor levels, at the PPM level for detection of many solvent vapors, or for LEL level detection of flammable vapors. Inquire at the factory for your specific requirement. Each alarm level activates a 12 amp relay inside the unit, and terminals are provided for wiring the relay to activate an external alarm device or some other device such as a ventilation fan.

This stand alone unit is housed in a durable plastic enclosure with flanges provided for wall mounting and is designed with easy access wiring hubs on the bottom of the unit. The front of the PS 2 contains three lights; Pilot, Alarm 1, and Alarm 2. An internal audible alarm (85 db) activates in a gas alarm condition.

The standard PS 2 is supplied with the gas sensor located on the end of a 30 foot cable (other cable lengths are also available). Each unit is powered by 115 VAC standard or 24 VDC as standard (48 VDC versions optional), and the AC version comes complete with a 6' power cord.

Features

• LEL or PPM detection ranges available for many gases
• 2 alarm levels
• Stand alone system
• Input voltages: 115 VAC standard, 24 VDC or 48 VDC (optional)
• Audible and visual alarms
• Compact design
• Simple installation
• AC version equipped with power cord
• Relay contacts rated 12A @ 115 VAC
• Low maintenance

Industry Applications

• Battery storage locations
• Petrochemical plants
• Refineries
• Water & wastewater treatment plants
• Degreasers
• Gas, telephone, & electric utilities
• Manufacturing facilities
• Steel
• Automotive
• HVAC

*Please note we can only ship RKI products to customers within the United States

73-1021RK-01 PS 2 Single Point Stand Alone Monitor for LEL Detection, 115VAC Powered by RKI Instruments

A perfect low cost solution for hydrogen detection in battery rooms, or for LEL or PPM level detection of a variety of flammable or solvent vapors in general industry.

The Model PS 2 is a multipurpose gas monitor utilizing a MOS (metal oxide sensor) for long lasting and low maintenance detection at the LEL or PPM levels of many gases or vapors. The PS 2 has two alarm levels for increasing gas or vapor levels, at the PPM level for detection of many solvent vapors, or for LEL level detection of flammable vapors. Inquire at the factory for your specific requirement. Each alarm level activates a 12 amp relay inside the unit, and terminals are provided for wiring the relay to activate an external alarm device or some other device such as a ventilation fan.

This stand alone unit is housed in a durable plastic enclosure with flanges provided for wall mounting and is designed with easy access wiring hubs on the bottom of the unit. The front of the PS 2 contains three lights; Pilot, Alarm 1, and Alarm 2. An internal audible alarm (85 db) activates in a gas alarm condition.

The standard PS 2 is supplied with the gas sensor located on the end of a 30 foot cable (other cable lengths are also available). Each unit is powered by 115 VAC standard or 24 VDC as standard (48 VDC versions optional), and the AC version comes complete with a 6' power cord.

Features

• LEL or PPM detection ranges available for many gases
• 2 alarm levels
• Stand alone system
• Input voltages: 115 VAC standard, 24 VDC or 48 VDC (optional)
• Audible and visual alarms
• Compact design
• Simple installation
• AC version equipped with power cord
• Relay contacts rated 12A @ 115 VAC
• Low maintenance

Industry Applications

• Battery storage locations
• Petrochemical plants
• Refineries
• Water & wastewater treatment plants
• Degreasers
• Gas, telephone, & electric utilities
• Manufacturing facilities
• Steel
• Automotive
• HVAC

*Please note we can only ship RKI products to customers within the United States

73-1021RK-02 PS 2 Single Point Stand Alone Monitor for PPM Detection, 115 VAC Powered by RKI Instruments

A perfect low cost solution for hydrogen detection in battery rooms, or for LEL or PPM level detection of a variety of flammable or solvent vapors in general industry.

The Model PS 2 is a multipurpose gas monitor utilizing a MOS (metal oxide sensor) for long lasting and low maintenance detection at the LEL or PPM levels of many gases or vapors. The PS 2 has two alarm levels for increasing gas or vapor levels, at the PPM level for detection of many solvent vapors, or for LEL level detection of flammable vapors. Inquire at the factory for your specific requirement. Each alarm level activates a 12 amp relay inside the unit, and terminals are provided for wiring the relay to activate an external alarm device or some other device such as a ventilation fan.

This stand alone unit is housed in a durable plastic enclosure with flanges provided for wall mounting and is designed with easy access wiring hubs on the bottom of the unit. The front of the PS 2 contains three lights; Pilot, Alarm 1, and Alarm 2. An internal audible alarm (85 db) activates in a gas alarm condition.

The standard PS 2 is supplied with the gas sensor located on the end of a 30 foot cable (other cable lengths are also available). Each unit is powered by 115 VAC standard or 24 VDC as standard (48 VDC versions optional), and the AC version comes complete with a 6' power cord.

Features

• LEL or PPM detection ranges available for many gases
• 2 alarm levels
• Stand alone system
• Input voltages: 115 VAC standard, 24 VDC or 48 VDC (optional)
• Audible and visual alarms
• Compact design
• Simple installation
• AC version equipped with power cord
• Relay contacts rated 12A @ 115 VAC
• Low maintenance

Industry Applications

• Battery storage locations
• Petrochemical plants
• Refineries
• Water & wastewater treatment plants
• Degreasers
• Gas, telephone, & electric utilities
• Manufacturing facilities
• Steel
• Automotive
• HVAC

*Please note we can only ship RKI products to customers within the United States

73-1022RK-01 PS 2 Single Point Stand Alone Monitor for LEL Detection, 115VAC Powered by RKI Instruments

A perfect low cost solution for hydrogen detection in battery rooms, or for LEL or PPM level detection of a variety of flammable or solvent vapors in general industry.

The Model PS 2 is a multipurpose gas monitor utilizing a MOS (metal oxide sensor) for long lasting and low maintenance detection at the LEL or PPM levels of many gases or vapors. The PS 2 has two alarm levels for increasing gas or vapor levels, at the PPM level for detection of many solvent vapors, or for LEL level detection of flammable vapors. Inquire at the factory for your specific requirement. Each alarm level activates a 12 amp relay inside the unit, and terminals are provided for wiring the relay to activate an external alarm device or some other device such as a ventilation fan.

This stand alone unit is housed in a durable plastic enclosure with flanges provided for wall mounting and is designed with easy access wiring hubs on the bottom of the unit. The front of the PS 2 contains three lights; Pilot, Alarm 1, and Alarm 2. An internal audible alarm (85 db) activates in a gas alarm condition.

The standard PS 2 is supplied with the gas sensor located on the end of a 30 foot cable (other cable lengths are also available). Each unit is powered by 115 VAC standard or 24 VDC as standard (48 VDC versions optional), and the AC version comes complete with a 6' power cord.

Features

• LEL or PPM detection ranges available for many gases
• 2 alarm levels
• Stand alone system
• Input voltages: 115 VAC standard, 24 VDC or 48 VDC (optional)
• Audible and visual alarms
• Compact design
• Simple installation
• AC version equipped with power cord
• Relay contacts rated 12A @ 115 VAC
• Low maintenance

Industry Applications

• Battery storage locations
• Petrochemical plants
• Refineries
• Water & wastewater treatment plants
• Degreasers
• Gas, telephone, & electric utilities
• Manufacturing facilities
• Steel
• Automotive
• HVAC

*Please note we can only ship RKI products to customers within the United States

73-1060RK FP-30 (15 & 30 Minute Averages) Formaldehyde Gas Detector by RKI Instruments

These highly sensitive portable gas detectors use photoelectric photometry method with colorimetric detection tab. The sample drawing rate is controlled by a microprocessor. Both the FP-30 have a direct readout of measurement value on an LCD display. The Model FP-30 can detect the new World Health Organization level of 0.08 ppm average for 30 minutes.

Features

• Simple operation
• Specific to Formaldehyde
• Built-in sample draw pump
• Easy to read LCD display
• Self-diagnosis
• Uses photoelectric photometry technology
• Direct digital readout
• Colorimetric detection tablet method
• No false readings from interfering gases
• Operates on 4 AA alkalines
• Stores 99 readings
• No warm up time

Applications

• Furniture and woodworking
• Coating and varnishing
• Engineered wood products
• Medical / veterinary
• Painting & corrosion resistant finishes
• Carpet manufacture & storage
• Adhesives
• Heat treatment operations
• RV/Trailer/mobil home inspecting

*Please note we can only ship RKI products to customers within the United States

73-1181RK CO-91 CO Monitor by RKI Instruments

Features:

• TWA and STEL readings and alarm
• Peak, average, elapsed time readout
• Output (0-1V)
• RF and weather resistant metal case
• 260 hours continuous operation
• Intrinsically safe in Japan

*Please note we can only ship RKI products to customers within the United States

73-1202 EC-600 Indoor Stand Alone Carbon Monoxide Monitor, 0-150 ppm, Battery Operated (2 AA batteries) by RKI Instruments

RKI's Model EC-600 is an indoor, standalone monitor that detects Carbon Monoxide (CO) with a range of 0-150 ppm with 1 ppm increments. It's sleek, low-profile design is equipped with a unique tri-color display, which changes color as Carbon Monoxide levels reach each alarm level. It is capable of operating with three different power options; 115 VAC, 24 VDC or alkaline batteries. The EC-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord in its AC version. If Carbon Monoxide is present, the user is notified by an audible alarm tone and the multicolored LED digital display.

The EC-600 uses a fast responding low-cost plug-in style electrochemical sensor. This long life sensor is fieldreplaceable with no special tools required. The sensor can also be remotely mounted with an optional remote sensor cable.

Features

• Operates with or without a controller
• Tri-color visual alarm display: Green=Normal, Yellow=Alarm 1, Red=Alarm 2
• Large easy to read digital display
• Three power options: 115 VAC, 24 VDC, or 2 AA alkaline batteries
• Operates up to 1 year on one set of AA alkaline batteries
• Remote mount sensor cable available
• Compact wall mount design

Applications

• Iron and steel industry
• Laboratories
• Boiler rooms
• Garages and tunnels
• Vehicle service areas
• Engine testing
• Shipping / receiving docks
• Multi-occupancy residences

*Please note we can only ship RKI products to customers within the United States

73-1202-03 EC-600 Indoor Stand Alone Carbon Monoxide Monitor, 0-150 ppm, Battery Operated (2 AA batteries), with 3 Meter Extender Cable by RKI Instruments

RKI's Model EC-600 is an indoor, standalone monitor that detects Carbon Monoxide (CO) with a range of 0-150 ppm with 1 ppm increments. It's sleek, low-profile design is equipped with a unique tri-color display, which changes color as Carbon Monoxide levels reach each alarm level. It is capable of operating with three different power options; 115 VAC, 24 VDC or alkaline batteries. The EC-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord in its AC version. If Carbon Monoxide is present, the user is notified by an audible alarm tone and the multicolored LED digital display.

The EC-600 uses a fast responding low-cost plug-in style electrochemical sensor. This long life sensor is fieldreplaceable with no special tools required. The sensor can also be remotely mounted with an optional remote sensor cable.

Features

• Operates with or without a controller
• Tri-color visual alarm display: Green=Normal, Yellow=Alarm 1, Red=Alarm 2
• Large easy to read digital display
• Three power options: 115 VAC, 24 VDC, or 2 AA alkaline batteries
• Operates up to 1 year on one set of AA alkaline batteries
• Remote mount sensor cable available
• Compact wall mount design

Applications

• Iron and steel industry
• Laboratories
• Boiler rooms
• Garages and tunnels
• Vehicle service areas
• Engine testing
• Shipping / receiving docks
• Multi-occupancy residences

*Please note we can only ship RKI products to customers within the United States

73-1202-03-CSA EC-600 Indoor Carbon Monoxide Monitor, 0-150 ppm, Battery Operated (2 AA Batteries) with 3 Meter Sensor Cable Installed, CSA Version by RKI Instruments

RKI's Model EC-600 is an indoor, standalone monitor that detects Carbon Monoxide (CO) with a range of 0-150 ppm with 1 ppm increments. It's sleek, low-profile design is equipped with a unique tri-color display, which changes color as Carbon Monoxide levels reach each alarm level. It is capable of operating with three different power options; 115 VAC, 24 VDC or alkaline batteries. The EC-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord in its AC version. If Carbon Monoxide is present, the user is notified by an audible alarm tone and the multicolored LED digital display.

The EC-600 uses a fast responding low-cost plug-in style electrochemical sensor. This long life sensor is fieldreplaceable with no special tools required. The sensor can also be remotely mounted with an optional remote sensor cable.

Features

• Operates with or without a controller
• Tri-color visual alarm display: Green=Normal, Yellow=Alarm 1, Red=Alarm 2
• Large easy to read digital display
• Three power options: 115 VAC, 24 VDC, or 2 AA alkaline batteries
• Operates up to 1 year on one set of AA alkaline batteries
• Remote mount sensor cable available
• Compact wall mount design

Applications

• Iron and steel industry
• Laboratories
• Boiler rooms
• Garages and tunnels
• Vehicle service areas
• Engine testing
• Shipping / receiving docks
• Multi-occupancy residences

*Please note we can only ship RKI products to customers within the United States

73-1202-05 EC-600 Indoor Stand Alone Carbon Monoxide Monitor, 0-150 ppm, Battery Operated (2 AA batteries), with 5 Meter Extender Cable by RKI Instruments

RKI's Model EC-600 is an indoor, standalone monitor that detects Carbon Monoxide (CO) with a range of 0-150 ppm with 1 ppm increments. It's sleek, low-profile design is equipped with a unique tri-color display, which changes color as Carbon Monoxide levels reach each alarm level. It is capable of operating with three different power options; 115 VAC, 24 VDC or alkaline batteries. The EC-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord in its AC version. If Carbon Monoxide is present, the user is notified by an audible alarm tone and the multicolored LED digital display.

The EC-600 uses a fast responding low-cost plug-in style electrochemical sensor. This long life sensor is fieldreplaceable with no special tools required. The sensor can also be remotely mounted with an optional remote sensor cable.

Features

• Operates with or without a controller
• Tri-color visual alarm display: Green=Normal, Yellow=Alarm 1, Red=Alarm 2
• Large easy to read digital display
• Three power options: 115 VAC, 24 VDC, or 2 AA alkaline batteries
• Operates up to 1 year on one set of AA alkaline batteries
• Remote mount sensor cable available
• Compact wall mount design

Applications

• Iron and steel industry
• Laboratories
• Boiler rooms
• Garages and tunnels
• Vehicle service areas
• Engine testing
• Shipping / receiving docks
• Multi-occupancy residences

*Please note we can only ship RKI products to customers within the United States

73-1202-05-CSA EC-600 Indoor Carbon Monoxide Monitor, 0-150 ppm, Battery Operated (2 AA Batteries) with 5 Meter Sensor Cable Installed, CSA Version by RKI Instruments

RKI's Model EC-600 is an indoor, standalone monitor that detects Carbon Monoxide (CO) with a range of 0-150 ppm with 1 ppm increments. It's sleek, low-profile design is equipped with a unique tri-color display, which changes color as Carbon Monoxide levels reach each alarm level. It is capable of operating with three different power options; 115 VAC, 24 VDC or alkaline batteries. The EC-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord in its AC version. If Carbon Monoxide is present, the user is notified by an audible alarm tone and the multicolored LED digital display.

The EC-600 uses a fast responding low-cost plug-in style electrochemical sensor. This long life sensor is fieldreplaceable with no special tools required. The sensor can also be remotely mounted with an optional remote sensor cable.

Features

• Operates with or without a controller
• Tri-color visual alarm display: Green=Normal, Yellow=Alarm 1, Red=Alarm 2
• Large easy to read digital display
• Three power options: 115 VAC, 24 VDC, or 2 AA alkaline batteries
• Operates up to 1 year on one set of AA alkaline batteries
• Remote mount sensor cable available
• Compact wall mount design

Applications

• Iron and steel industry
• Laboratories
• Boiler rooms
• Garages and tunnels
• Vehicle service areas
• Engine testing
• Shipping / receiving docks
• Multi-occupancy residences

*Please note we can only ship RKI products to customers within the United States

73-1202-10 EC-600 Indoor Stand Alone Carbon Monoxide Monitor, 0-150 ppm, Battery Operated (2 AA batteries), with 10 Meter Extender Cable by RKI Instruments

RKI's Model EC-600 is an indoor, standalone monitor that detects Carbon Monoxide (CO) with a range of 0-150 ppm with 1 ppm increments. It's sleek, low-profile design is equipped with a unique tri-color display, which changes color as Carbon Monoxide levels reach each alarm level. It is capable of operating with three different power options; 115 VAC, 24 VDC or alkaline batteries. The EC-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord in its AC version. If Carbon Monoxide is present, the user is notified by an audible alarm tone and the multicolored LED digital display.

The EC-600 uses a fast responding low-cost plug-in style electrochemical sensor. This long life sensor is fieldreplaceable with no special tools required. The sensor can also be remotely mounted with an optional remote sensor cable.

Features

• Operates with or without a controller
• Tri-color visual alarm display: Green=Normal, Yellow=Alarm 1, Red=Alarm 2
• Large easy to read digital display
• Three power options: 115 VAC, 24 VDC, or 2 AA alkaline batteries
• Operates up to 1 year on one set of AA alkaline batteries
• Remote mount sensor cable available
• Compact wall mount design

Applications

• Iron and steel industry
• Laboratories
• Boiler rooms
• Garages and tunnels
• Vehicle service areas
• Engine testing
• Shipping / receiving docks
• Multi-occupancy residences

*Please note we can only ship RKI products to customers within the United States

73-1202-10-CSA EC-600 Indoor Carbon Monoxide Monitor, 0-150 ppm, Battery Operated (2 AA Batteries) with 10 Meter Sensor Cable Installed, CSA Version by RKI Instruments

RKI's Model EC-600 is an indoor, standalone monitor that detects Carbon Monoxide (CO) with a range of 0-150 ppm with 1 ppm increments. It's sleek, low-profile design is equipped with a unique tri-color display, which changes color as Carbon Monoxide levels reach each alarm level. It is capable of operating with three different power options; 115 VAC, 24 VDC or alkaline batteries. The EC-600 has two preset alarms, and comes ready to operate with a simple wall mount bracket and 10 foot power cord in its AC version. If Carbon Monoxide is present, the user is notified by an audible alarm tone and the multicolored LED digital display.

The EC-600 uses a fast responding low-cost plug-in style electrochemical sensor. This long life sensor is fieldreplaceable with no special tools required. The sensor can also be remotely mounted with an optional remote sensor cable.

Features

• Operates with or without a controller
• Tri-color visual alarm display: Green=Normal, Yellow=Alarm 1, Red=Alarm 2
• Large easy to read digital display
• Three power options: 115 VAC, 24 VDC, or 2 AA alkaline batteries
• Operates up to 1 year on one set of AA alkaline batteries
• Remote mount sensor cable available
• Compact wall mount design

Applications

• Iron and steel industry
• Laboratories
• Boiler rooms
• Garages and tunnels
• Vehicle service areas
• Engine testing
• Shipping / receiving docks
• Multi-occupancy residences

*Please note we can only ship RKI products to customers within the United States