RKI Instruments

*Please note we can only ship RKI products to customers within the United States

72-RA-C-59 GX-3R 4-Gas Confined Space Monitor Bundled, LEL/O2/CO/H2S with RP-3R, 10' Hose & Probe, 100-240 VAC Charger, 34AL Cylinder CH4/O2/H2S/CO, 0.25 LPM Regulator, Tubing, Screwdriver, and Carrying Case by RKI Instruments

OSHA defines the breathing zone as a ten inch radius around the worker's nose and mouth, and requires that worker exposure monitoring air samples be collected in the breathing zone. Air sampling filters may be attached to the collar or lapel. Traditionally this means only a single gas monitor would be small enough for a worker to practically wear a gas monitor 'In the breathing zone'. Now there is a 4 gas monitor smaller than many single gas monitors.

The GX-3R is the worlds smallest 4 gas monitor weighing only 3.52 ounces and can comfortably be clipped within a worker's breathing zone (2.2" W x 2.55" H x 1.02" D). It simultaneously monitors and displays LEL combustibles, O₂, CO (Hydrogen compensated CO also available), and H₂S.

The GX-3R represents the latest evolution of gas detection technology utilizing a new generation of micro sensors. The LEL sensor has a unique design with two active filaments in one sensor to increase it's resistance to silicone poisoning. If one filament gets poisoned the second filament takes over. The new O₂ sensor is electrochemical with a 3 to 5 year life span. H₂S and CO are now available in a combo micro sensor.

Safety supervisors will appreciate the non-compliance indicator. The instrument flashes it's 3 LED lights every 30 seconds in the following conditions; if the instrument has not been bump tested, or if calibration is due, or if there was a gas alarm event. The 3 LED lights will continue to flash once every 30 seconds until the non-compliance condition has been resolved. The 30 second interval is adjustable.

Features

• Smallest & lightest 4 gas monitor: 2.2" W x 2.55" H x 1.02" D, 3.52 ounces
• Simultaneous detection of 4 gases: LEL, O2, H2S & CO; H2 Compensated CO sensor available
• Simple 2-button operation
• Non-Compliance Indicator
• Alarms: audible, visual, & vibration
• 3 user adjustable alarm levels
• Impact resistant body with removable rubber boot
• Large LCD Auto-backlit display
• 25 hours of operation (Lithium-ion battery)
• Field replaceable sensors & filters
• Water and dust resistant design, IP66/68
• Stealth mode for law enforcement
• 3 Year warranty

Applications

• Personal monitoring
• Confined spaces
• Refineries/petrochemical
• Utilities
• Oil and Gas
• Water/wastewater
• Fire services
• Construction

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

72-0002RK GP-204 Hand Aspirated Single Gas Indicator, Marine Version, 0 - 100% LEL Isobutane (CH3)(3CH), Includes Leather Case, 3' Hose, 10" Probe, Aspirator and 2 Size D Alkaline Batteries (For use on Ships) by RKI Instruments

The P-200 series gas detectors are rugged, lightweight, hand held portables for detecting combustible gases/vapors and monitoring atmospheric oxygen content. Engineered to serve the demanding field requirements of industrial, public works, utilities, and landfills, these instruments share many common features and offer the user distinct advantages in terms of economy, dependability, maintainability and ease of operation. Built to withstand rough field environments, all Series P-200 instruments are constructed with rugged cast aluminum housings, and incorporate highly reliable electrical design characteristics. All active and passive components are mounted on easily accessible printed circuit boards. In operation, all P-200 instruments are not only easy to use, sharing common functional characteristics, but they are extraordinarily fast in providing accurate readings. For combustible indicators, the response time is about 4 seconds, and for oxygen indicators an accurate reading is attained within 6 seconds.

By maximizing the use of common components and operating characteristics, RKI offers not only high quality field instruments, but has greatly simplified and expedited other very important considerations, such as field service, personnel training and accessory interchangeability. The commonality of components can save valuable time when field service becomes necessary. Fundamental operating features are easy to understand and all components are very accessible for checkout, replacement or repair.

Features

• Fast Response
• Light Weight
• Rugged Construction
• Simple to Operate
• Economical
• Field Proven Dependability

Industry Applications

• Industrial Applications
• Land Fills
• Utilities
• Public Works

*Please note we can only ship RKI products to customers within the United States

724-104-05-P1 Eagle 2 Portable Monitor, CH4(IR Autoranging %LEL/%vol)/Oxy/CO2(IR 0-60%vol)/VOC(PID 0-50 ppm) by RKI Instruments

Continuing in its legacy of durable and reliable gas detection and monitoring systems, RKI Instruments is proud to offer a new product in its popular Eagle portable gas detector series. The Eagle 2 can monitor up to 6 different gases and is equipped with several exclusive features that can only be found with the Eagle series. In addition, its large glove friendly push buttons and LCD screen ensure an ease of use when onsite. Rated intrinsically safe, the Eagle 2 is equipped with state of the art technologies that are not available with other competitive gas detectors and monitors.

Specialty Sensors

The Eagle 2 has a variety of available specialty sensors. Workers can use a photoionization detector for low or high range VOC detection and Fence Electrode Technology for humidity and contamination resistance. An infrared sensor is available for Co2, % LEL CH4, % Volume CH4, % LEL HC, and % Volume HC. Thermal conductivity sensors are available for % Volume H2 and % Volume CH4. The unit is also compatible with the smart plug and play toxic sensors for the detection of NH3, AsH3, CI2, HCN, PH3, and SO2. With the wide variety of sensors and gas detection available, the Eagle 2 can be customized to meet almost all worksite gas detection needs.

Exclusive Features

The monitor has a long internal pump that can draw samples for up to 125 feet. The pump features a low flow auto shut off and alarm. This allows operators to respond swiftly from a safe distance. The unit is multilingual with 5 different language preferences, and features an alkaline battery life of 18 hours or a NiMH life of 20 hours. To protect the integrity of the device and the configurations, the unit can be password protected. The Eagle 2 also has standard data logging capabilities for easy research, evaluation, and site monitoring. To reduce calibration costs and time, the unit features an automatic calibration option and a single gas calibration option.

The Eagle 2 is heavily protected from environmental conditions by a weather proof, chemical resistant RFI/EMI coated high impact polycarbonate/PBT blend enclosure. The enclosure also renders the unit water and dust resistant. Because of the enclosure, the Eagle 2 can function in 2 inches of water without leakage.

Eagle 2 Specifications

The portable and durable unit is lightweight at less than 4 pounds. Its dimensions are suitable for convenient carrying (9.5 L x 5.25 W x 5.875 H), and it features a conveniently placed durable top handle. The large easy to read display has a polyurethane overlay backlights on demand and when the alarm is activated. The 2 alarm channels are fully adjustable for the user and can be password protected. With a 95 dB buzzer and 4 high intensity LEDs, the alarm is sure not to be missed. The Eagle 2 is standard with a 2 year warranty for material and workmanship and a 1 year warranty for PID sensor.

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

81-SDM2009 SDM-2009 Single Point Calibration Station for with AC Adaptor by RKI Instruments

RKI's new SDM-2009 calibration station for the GX-2009 is now available with advanced features for charging, calibration, & bump testing. Once you power up the GX-2009 inside the SDM-2009 calibration module, the GX-2009's display will indicate whether it's transmitting data, bump testing, calibrating, as well as the results of the bump test or calibration.

Stand Alone Station

Multi Module System

Stand Alone Station Features

• Stand-alone station (no PC Required)
• Charging
• Calibration
• Bump Test
• Save Bump Test and Calibration records
• Bump test and calibration records copy to USB jump drive
• Includes PC software for viewing/ archiving bump test and calibration records

Multi Module System Features

• Multiple modules connected to a PC (10 max)
• Charging
• Calibration
• Bump Test
• Automatic calibration/bump test option
• Configure GX-2009 parameters
• Archive Bump Test and Calibration records
• Archive data to network location
• Software controlled data retrieval
• Windows 7 compatible

*Please note we can only ship RKI products to customers within the United States

SD-805RID-IPA SD-805 Smart Transmitter/Gas Detector for %LEL IPA by RKI Instruments

The model SD-805 series Smart Transmitter/detector heads are state of the art instruments housed in a flameproof enclosure.

A simple magnetic control key is placed over clear marked positions on the surface plate to test and adjust the instrumentwithout opening the transmitter/detector head.

Two different detection princples are provided with SD-805 series which enables you to select the most suitable principle according to your detection gas, range and application for use. Especially the model SD-805RI can detect combustible gases (CH4 and i-C4H10) with 0-100% volume F.S. in inert gas base.

Dual alarm contacts and trouble alarm contact are provided for activation of external buzzer or alarm light. Powered by 24 VDC, the unit has a 4-20mA output for communication to outside controllers, for external readouts or alarming devices.

An extensive range of accessories supplied by RKI rounds up Model SD-805 series

Features:

• For combustible and toxic gases
• Longlife RKI sensors
• Dual alarm contacts
• 4-20mA linear output
• Automatic zero correction function, self-diagnosis
• Explosion proof housing, IP65 ingress class
• ATEX and MED approved (Wheelmark)

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

72-2108RK Beacon 800 Eight Channel Wall Mount Controller (No Sensor) by RKI Instruments

For industrial gas detection, the 8 Channel Wall Mount Controller Beacon 800 Model is a simplified gas detection system. The unit is easy to operate and maintain, and a wall mounting kit is included with every purchase. For easy operation, the Beacon 800 has a bright backlit display that provides simultaneous readouts of all 8 channels. The wall unit is cased in a NEMA 4X rated enclosure that is weather tight and resistant of environmental hazards.

For ease of use, the alarm system may be reset through an external reset switch, and the unit features bottom mounted wiring hubs for easy access to wiring. It is also compatible with a variety of accessories that are easily wired directly to the unit, eliminating the need for costly external relays. The Beacon 800 is also compatible with the widest variety of gas detection sensors available by RKI Instruments. With a user oriented design, the Beacon 800 8 Channel Wall Mount Controller is cost effective and versatile for almost any industrial applications.

Exclusive Features

The Beacon 800 Model 8 Channel Wall Mount Controller has several key features.

• The unit is capable of relaying up to 8 separate channels.
• Each channel has 2 programmable alarm levels.
• The wall unit has a very loud audible alarm (94 decibels) with a reset button.
• The alarms are coded with pulsing alarms indicating a gas alarm and a steady alarm indicating a fail alarm.
• The unit also has 4 visual LED light alarms for alarm indications, pilot, and malfunctions.
• It has long life sensors that typically operate for more than 2 years.
• The unit is low cost and versatile.
• The model is controlled by microprocessor technology.

Specifications

The Beacon 800 model has dimensions of 12.5 x 11 x 6.4 inches. It is enclosed in a wall mounting grey fiberglass casing with a hinged cover. It is waterproof, chemical, and weather resistant. The unit has a wiring distance of up to 8,000 feet and accepts any 4-20mA transmitter. The wall mount has a bright backlit alphanumeric display with 16 characters per line and 4 lines each. All 8 channels can be continuously displayed. The unit is powered by 85-264VAC or 24VDC. It comes standard with a one year warranty for materials and workmanship.

RKI Instruments

RKI Instruments is dedicated to innovation in gas detection technologies. For over 70 years, RKI has sold hundreds of thousands of gas detection systems all over the world. The company works diligently to develop new and reliable products for an expanding market which contributes to the company's high rate of growth. Today, RKI has over 700 valuable employees that are experts in the industry. The company takes great pride in its experienced staff of experts, engineers, and scientists. That pride is evident with their consistent release of groundbreaking products.

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States